Parts for Maytag MGR6875ADB: 05 - Gas Controls Parts

5K. Mueller

9K. Mueller.

Fix gas smell or burner ignition issues with this range top burner valve. Common repair for leaking gas odor when range is off. Moderate difficulty.

Burner head sits on the base and distributes gas through precision ports for even flame. Replace if cracked, clogged, or corroded for proper ignition.

Auxiliary burner head for gas ranges and cooktops. Mounts over the orifice to distribute gas through precision ports. Replace if clogged or damaged.

Burner head for gas ranges and cooktops. Distributes gas evenly to create a proper flame. Replace if cracked, damaged, or clogged with buildup.

This burner head mounts on the cooktop and distributes gas evenly to produce a steady flame. Replacing a worn or damaged head restores proper flame pattern and helps your burner light quickly and cook consistently.

• Directs gas through precisely sized ports to create an even flame
• Can resolve issues like uneven flames, yellow/orange flames, or delayed ignition
• Helps when the burner won't light or only lights partially
• Replaces a corroded, clogged, or warped burner head

• Disconnect power and shut off gas supply before servicing
• Allow the cooktop to cool completely
• Lift off the grate and cap; remove the old head and align the new head on the burner base
• Ensure ports are clean and seated correctly; test for proper ignition and flame

Burner cap covers the gas burner head to distribute flame evenly. Replace if chipped, cracked, or causing uneven heating. Verify fit by model number.

Replace your range burner cap when flames are uneven, discolored, or the cap is cracked or chipped. Ensures proper gas flow and even heating. Confirm fit with your model number.

Color: Black. Size: Large.

Color: black. Small size. Measures about 2-1/2 inches in diameter.

Fix a burner that won't light, won't adjust heat properly, or stays on constantly with this range top burner valve. Moderate DIY repair in 30-45 minutes.

Gas burner won't ignite or spark? This surface burner spark electrode generates the spark to light your cooktop burner. Moderate DIY repair.

Secures the center burner orifice on gas ranges for proper alignment and consistent flame. Replace if worn or damaged to restore burner performance.

The Orifice Holder is an OEM part for Whirlpool gas ranges. It includes the spark electrode and the 9.2k orifice, which are essential components for proper ignition and gas flow in the burner assembly.

Causes of a faulty orifice holder can include wear and tear over time, damage from corrosion or debris, or improper adjustment.

Symptoms of a bad orifice holder may include:

• Weak or no ignition spark
• An uneven or weak flame
• Difficulty in adjusting the burner flame
• Gas odor or leakage

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Fixes weak flame or ignition failure on 12K burners. This orifice holder restores proper gas flow when clogged or damaged. Moderate DIY repair.

Burner won't ignite or flame is weak? This orifice holder aligns the burner orifice and electrode for reliable ignition. Moderate DIY, 30-60 minutes.

This is a small seal that fits around the surface burner control switch on a range, preventing moisture and debris from entering the switch housing. It helps protect the electrical switch components behind the control panel. Replace this seal if it is cracked, deteriorated, or missing, which can allow spills or cleaning liquids to reach the switch and cause erratic burner operation or short circuits.

Burner won't spark or click when turned to Lite? This igniter switch mounts on the gas valve to signal the spark module. DIY fix in under 30 minutes.

Gas supply tube that connects the main gas line to the top burners on your range. Replace if cracked, damaged, or leaking to restore safe gas flow.

Burner won't ignite or has weak flame? This right-side top burner tubing restores proper gas flow to your range burner. Simple repair, 2-pack included.

Fix continuous clicking or no-ignite issues on gas range burners. This spark module controls ignition timing and generates sparks to light surface burners.

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

• Fastens panels, brackets, covers, or internal parts to the chassis or frame
• Helps maintain alignment and support, reducing rattle, vibration, or looseness
• Replaces missing or damaged screws that have backed out, broken, or stripped
• Restores secure mounting after service when original hardware is lost

• Disconnect power; shut off water or gas supplies before servicing
• Use the correct driver; start threads by hand to avoid cross-threading
• Match length and thread to the original location; do not substitute with longer hardware
• Tighten snugly; do not overtighten into plastic or thin metal

Upper broiler burner tube for gas ranges. Delivers gas from the manifold to the broiler burner. Replace if cracked, damaged, or corroded to restore proper fit.

Broiler won't light or takes too long to ignite? This range broil burner igniter provides the spark to light your oven's broil flame. DIY install.

Fastening screw for securing components inside appliances. Replaces lost, stripped, or damaged screws during repairs or part installations.

The Oven Igniter is an OEM part for Whirlpool ovens. It is responsible for igniting the gas to start the oven heating process. This igniter is crucial for ensuring that the oven reaches and maintains the desired temperature for baking and cooking.

Over time, the igniter can suffer from wear and tear, leading to inefficient ignition or complete failure. Causes of a bad igniter can include repeated heating cycles, electrical issues, or physical damage to the igniter element.

Symptoms of a bad igniter include:

• The oven not heating up or taking too long to preheat
• A noticeable gas smell due to incomplete ignition
•  The igniter glowing without igniting the gas

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Secures the gas orifice to the burner valve assembly on gas ranges. Replace if worn, stripped, or damaged to restore proper orifice positioning.

Secures the gas orifice to the burner valve assembly on gas ranges. Replace if worn, stripped, or damaged to restore proper orifice positioning.

Fix uneven baking or no heat in your range oven with this bake burner tube and orifice assembly. Common repair for gas ranges with heating issues.

Metal grounding screw for electric ranges and ovens. Secures electrical grounding connections. Replace if stripped, corroded, or missing.

Hand-tighten wing nut secures panels, brackets, and components in ranges and ovens for tool-free adjustment. Replace when lost, stripped, or broken.

Hand-tighten wing nut secures panels, brackets, and components in ranges and ovens for tool-free adjustment. Replace when lost, stripped, or broken.

If your oven igniter glows but the oven won't heat, the bake and broil valve likely isn't opening to allow gas flow. Moderate DIY repair in 30-45 minutes.

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

• Fastens panels, brackets, covers, or internal parts to the chassis or frame
• Helps maintain alignment and support, reducing rattle, vibration, or looseness
• Replaces missing or damaged screws that have backed out, broken, or stripped
• Restores secure mounting after service when original hardware is lost

• Disconnect power; shut off water or gas supplies before servicing
• Use the correct driver; start threads by hand to avoid cross-threading
• Match length and thread to the original location; do not substitute with longer hardware
• Tighten snugly; do not overtighten into plastic or thin metal

Replacement mounting screw for securing handles, panels, and internal components. Needed when original screws are stripped, lost, or broken during repairs.