Parts for Mtd 170-LU: Lu Fuel Tank & Mounting Parts

This governor spring is a genuine MTD part, sold individually. This governor spring can be used as a replacement part in lawn mowers, tillers, leaf blowers, log splitters, and wood chippers. The purpose of a governor spring for these outdoor appliances is to facilitate the opening and closing of the throttle which helps the appliance maintain its even pace and speed while in operation.The governor spring in an outdoor appliance might have to be replaced if it loses its spring tension. This could occur as the result of a collision with a hard object or due to general wear and tear over long-term use. If this damage prevents the governor spring from serving its typical function, it should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This governor spring is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Troy-Bilt, Yard Machines, Huskee, Yard Man, and MasterCut.

This throttle linkage spring is typically attached to the throttle cable, although it may be attached to the carburetor or the throttle body on select models. This spring will close the throttle valve, which helps reduce the fuel flow to the engine and helps to slow it down. The spring can become stretched or snap over time with regular use. A faulty throttle spring could be identified by the throttle sticking or lacking any control at all. This simple repair will require needle nose pliers, sockets, a screwdriver, and a wrench. Be sure to use gloves to perform all repairs and use caution when replacing the throttle spring to prevent damage to the new part. This OEM throttle spring is designed for use with lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and other small engines in lawn care equipment. It is compatible with more than 150 models and a number of brands, including Troy-Bilt, Husky, Yard-Man, MTD, Yard Machines, and Cub Cadet.

The governor rod is a genuine replacement part found on select models of snowblowers. This rod is responsible for connecting the throttle cable and throttle body, helping to open and close the throttle to change the speed of the engine. This durable metal rod is exposed to repetitive motion and constant vibrations, which can cause damage or wear over time. If this rod does not function, the throttle will be unable to be controlled and that can affect the use of the equipment. Replacing the governor rod with this genuine part will guarantee an exact fit for compatible units. This genuine governor rod is manufactured to specific OEM standards and can be used in compatible machines from Cub Cadet, MTD, Yard Man, Craftsman, Troy-Bilt, Yard Machines, and HUSKEE. The part can be found in snowblowers, with hundreds of possible models that can take this governor's rod. It is made of durable metal and sold as an individual unit. No additional components or hardware are included, and any additional parts will require a separate purchase. Always wear gloves and perform engine repairs only when the machine has had time to cool. Be sure to disengage the engine before doing any work for safety, as well.

This fuel line kit is a genuine OEM part sourced directly from the manufacturer; it is designed for lawnmowers and other small engines. The fuel line connects the fuel tank to the carburetor. This brings fuel in for combustion. Normal wear and tear, the elements, and bad fuel can cause a fuel line breakdown. When this happens, the engine will not work efficiently or may not start at all. If there is a fuel odor, fuel leaks, or the engine misfires or stalls, the fuel line is an excellent place to check first. If the fuel line is discolored or there are obvious cracks, it should be removed and replaced. Squeezing the line can help see any cracks that might not be immediately evident. The fuel line is connected by two spring clamps, one on each end. No tools are required to remove the fuel line. Empty the fuel tank before removing and replacing the fuel line. Remove the spark plug as a safety precaution. This fuel line kit is made of flexible plastic with metal spring clips; it is sold as an individual kit. This kit compatible with small engines manufactured by Troy-Bilt and MTD.

This is an OEM primer hose assembly replacement sourced directly from the manufacturer. It is used on various outdoor lawn and garden small engines. The primer hose is inserted into the fuel tank. This hose then connects to a bulb that forces the fuel to the carburetor to start the engine. Excess fuel is forced back into the fuel line. Normal wear and tear can cause the line and primer bulb to become brittle and crack, making it unable to move fuel into the carburetor.A Phillips screwdriver, long-nosed pliers, standard screwdriver, and a pan to drain the fuel are necessary to remove and replace the primer hose assembly. This project can be complete in less than half an hour. Drain the fuel from the fuel tank and fuel lines before starting the project. Remove the rear cover and take the carburetor and fuel lines off the engine. Install the primer hose and primer bulb. Reinstall the parts and fill the fuel tank. Pump the primer bulb to make sure it is installed correctly.This primer hose assembly is made of plastic and rubber and is sold as an individual kit. It is compatible with tillers and other small engines manufactured by MTD, Cub Cadet, and Yard Machines.

This replacement part is a roll over valve. This is a genuine replacement part made by MTD. This part is found in many machines and is primarily a safety device that ensures that the fuel tank does not leak in the event of a vehicle roll-over. A new roll over valve might be needed if the current one is missing or damaged in any way. If the fuel tank is leaking when on it's side or upside down, it might be due to this part not working properly. If this is the case, be sure to replace it as soon as possible. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This is an authentic OEM replacement part sourced directly from the manufacturer for use in various small engines. This oil fill tube assembly is part of the oil delivery system. This tube delivers the oil to the oil tank when it is added to the engine. If this tube cracks or deteriorates over time, the oil will not make it to the oil tank or the engine. This could lead to complete engine failure if the leak is not discovered. Oil on the driveway or lawn or smoke coming from under the engine when the lawnmower is running is a sure sign that the tube may need to be replaced.The oil fill tube assembly also houses the dipstick which is used to check the oil level in the mower. If the assembly is leaking, the reading won't be accurate and the lawnmower may be operated without adequate oil which can damage the engine. A screwdriver is needed to replace the oil fill tube. Do not replace this part until the engine has cooled. This oil fill tube assembly is made of black molded plastic and sold as an individual unit. It is designed for use in lawnmowers and other small engines manufactured by Toro, Tecumseh, and Briggs & Stratton.

This is an oil dipstick assembly that is a crucial part of many types of lawn and garden equipment. The dipstick is made of quality plastic and metal and is located inside the oil fill tube. The purpose of the part is to indicate how much oil is currently in the engine. Regular use can cause this component to wear out or become damaged over time. When this occurs, it's not possible to determine how much oil is present so the oil dipstick assembly will need to be replaced.Replacing the oil dipstick assembly is a simple and quick process. No tools are needed to make the replacement. Turn off the equipment and access the oil fill tube. Unscrew and remove the old oil dipstick tube before replacing it with the new component. The equipment can then be used as normal.This oil dipstick assembly is a genuine OEM replacement part that is directly sourced from the manufacturer. The part is sold on an individual basis. This component is made for use with lawnmowers, snowblowers, tillers, leaf blowers, log splitters, and wood chippers created by MasterCut, Yard-Man, Huskee, MTD, Yard Machines, Troy-Bilt, Cub Cadet, and Craftsman.

Here is an OEM replacement fuel cap that can be used with a range of gas-powered lawn and garden machines. The fuel cap is used to protect the fuel tank from debris and dirt. It will also help to reduce air from getting into the fuel tank. If there is air or dirt in the fuel, it can make starting the vehicle more difficult or even impossible. Dirt in the fuel can also cause severe damage to the engine. A replacement cap is a simple fix to prevent these issues. Although fuel caps can last for years, there is always the chance that one could have been lost, damaged, or could suffer from too much wear and tear. The replacement cap can simply be screwed in place to replace the old cap. This is an authentic OEM replacement fuel cap that is sold individually. The cap can be used on many types of machines including tillers, log splitters, chippers, and other small engines. The fuel cap is compatible with many brands including Cub Cadet, MTD, Yard Machines, Yard-Man, and Troy-Bilt.

This is a genuine OEM replacement tether sourced directly from the manufacturer. It is used on many different fuel tanks on lawn and garden equipment. The tether attaches to the fuel cap and is part of the fuel cap originally. The fuel cap is vented to prevent heat from causing fuel tank expansion and possible explosion. The tether is designed to help hold the fuel cap in place during use. Everyday use may cause the tether to fall off. Without the tether, vibration from use or running into brush and trees can cause the fuel cap to come off. The cap is red to help it stand out on the engine. It has the image of a gas pump to show that it is where the fuel goes.If the tether breaks off and falls into the gas tank, use needle-nose pliers to fish it out. If that does not work, remove the fuel tank and empty the contents into a dish. The tether will fall out. The new gas cap and tether can be screwed in without tools.This tether is a plastic part that is individually sold. It is compatible with many fuel tanks manufactured by MTD, Yard Machines, Cub Cadet, and Troy-Bilt.

This fuel tank is used for a variety of outdoor lawn and garden machines. This white plastic tank stores the fuel that runs the engine. Fuel tanks have an inlet hole for filling with fuel and an outlet hole which is attached to a fuel pump. Weather exposure and normal use can cause the fuel tank to crack and break. This can lead to fuel leaks which can be dangerous if not caught before operation. Repairing a fuel tank is not an option; it must be replaced for the operator's safety. If necessary, allow the machine to cool before the replacement. Drain the fuel tank and fuel lines. Remove the spark plug for added safety. Use a wrench to remove the damaged fuel tank. Dispose of this tank properly as it may have fuel remnants that can be flammable. Install the new fuel tank and connect the fuel line. Fill the tank with gas and check for leaks before using. This fuel tank is made of durable plastic. It is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. The fuel tank is compatible with tillers, log splitters, and other small engines manufactured by Cub Cadet, MTD, and Yard Machines.

The purpose of the fuel nipple in a small engine is to clean the fuel before it reaches the carburetor. If the fuel is dirty, it could cause issues with the carburetor and other parts of the engine. If the engine misfires, has a fuel odor, leaks, or has problems with dirty fuel getting into the carburetor, it may be time to replace the fuel nipple. It is an easy replacement, but be sure to work in a well-ventilated area. Drain the fuel tank and disconnect the spark plug before beginning this repair. This OEM fuel nipple is a genuine part right from the manufacturer. This fuel nipple can work well for snowblowers, snow throwers, chippers, tillers, and log splitters. It is compatible with a range of models from brands like Craftsman, Yard Machines, Yard-Man, MTD, and Troy-Bilt.