Skip to Content
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • 15 million satisfied customers 15 million satisfied customers
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store

Admiral Washer Dryer Combo Parts

Best Seller
Admiral Dryer Drum Support Roller
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001541

Replacement drum support roller for dryers. Installs on the drum assembly to allow smooth rotation. Replace when cracked, worn, or making noise.

Do-It-Yourself Stories from Customers like You Dryer squealing on startup   Sandy R. • Manhattan , KS • September 08, 2015

I replaced the belt, belt tension pulley, both dryer drum roller axles and both drum support rollers. Although I bought 2 tumbler bearing kits, because those still look good I am saving them for when they go bad. The videos were fantastic! I also took pictures as I went of wiring so there would be no question where things went when reassembling. It should be noted some models have extra terminals near the sensor terminals... just be aware and look closely/take pics as you are taking things... Read more

More
$22.53
Compare At:
$30.18
You Save:
$7.65

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Admiral Dryer Blower Wheel Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: Y303836

Dryer making rumbling noise or drying slowly? A worn blower wheel with a rounded center causes wobbling and poor airflow. Moderate DIY repair.

Do-It-Yourself Stories from Customers like You Very concerning loud thumping noise while running our dryer.   William M. • Sudbury , MA • July 20, 2019

In the past, I replaced some electronic components on our gas dryer, the solenoid and the electronic ignitor, but the rest of the dryer looked more difficult to repair if needed in the future. I was wrong. I went unto AppliancePartsPros.com and watched some repair videos on dryers like mine that make big thumping sounds while drying. This happened when I googled my dryer model number in an attempt to find out is capacity, because I wanted our new dryer to have the same capacity. I found out... Read more

More
$21.46
Compare At:
$27.20
You Save:
$5.74

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Admiral Flame Sensor
Genuine Whirlpool part
By: Whirlpool
Part Number: WP338906

The Flame Sensor is an OEM replacement part for Whirlpool gas dryers. This component plays a critical safety role by monitoring the presence of the gas burner flame during the drying cycle.

Causes of needing to replace the flame sensor can include normal wear and tear over extended use, exposure to high temperatures or corrosion, or physical damage to the sensor itself.

Symptoms that may indicate a faulty flame sensor include:

  • The dryer not heating or producing heat properly
  • Error codes related to the gas system or ignition failure
  • The dryer shutting off unexpectedly during cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas dryer models. 

This part fixes the following symptoms
  • Shuts off too soon
  • No heat or not enough heat
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You 11 year old kenmore elite gas drye stopped working initial diagnosis: burner would light but would shut off in 3 or 4 minutes   Jay W. • Dallas , TX • April 05, 2015

I used Fixya as an initial source describing my problem. I got two responses which were very helpful. One that the "coils" were probably the problem. Two, that the problem could be the thermostat or a thermistor in the dryer. I verified that AC was coming from the timing control, that both the two terminal and three terminal coils,the igniter and shut off thermostat all had continuity. I then applied AC directly to the coils: the two terminal coil ""clanked" and I interpreted that as the coil... Read more

More
$35.95
Compare At:
$43.14
You Save:
$7.19

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Admiral Dryer Front Drum Glide Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 306508

This kit includes the front drum glide pads that support the front edge of the dryer drum as it rotates. The glides are mounted on the front bulkhead and provide a smooth, low-friction surface for the drum to rest on. Replace these glides if the dryer makes squealing, scraping, or thumping noises during operation, or if you notice dark marks or wear on the front of the drum.

Do-It-Yourself Stories from Customers like You Dryer squealing on startup   Sandy R. • Manhattan , KS • September 08, 2015

I replaced the belt, belt tension pulley, both dryer drum roller axles and both drum support rollers. Although I bought 2 tumbler bearing kits, because those still look good I am saving them for when they go bad. The videos were fantastic! I also took pictures as I went of wiring so there would be no question where things went when reassembling. It should be noted some models have extra terminals near the sensor terminals... just be aware and look closely/take pics as you are taking things... Read more

More
$12.95
Compare At:
$21.82
You Save:
$8.87

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Admiral Dryer High Limit Thermostat
Genuine Whirlpool part
By: Whirlpool
Part Number: WP303396

Dryer not heating? This high limit thermostat cuts power when temps exceed safe levels. Common fix for no heat issues. Simple DIY install in 5-10 minutes.

This part fixes the following symptoms
  • Too hot
  • No heat or not enough heat
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You Dryer was functional but not heating up   John M. • Pompton Lakes , NJ • September 10, 2016

Replaced the thermostat and fuse it could have been either of them that was causing the issue - and now it works like a charm. Read more

More
$30.54
Compare At:
$40.86
You Save:
$10.32

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Admiral Door Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: W10820036

The Washer Door Switch is an OEM part for Whirlpool washing machines. This component is crucial for ensuring the washer operates safely by detecting whether the door is open or closed. The door switch prevents the washer from starting or continuing its cycle when the door is open, and it allows the machine to function only when the door is securely closed.

Symptoms of a failing Washer Door Switch include:

  • The washer not starting or stopping unexpectedly during a cycle
  • Error codes related to door closure issues displayed on the washer's control panel
  • The washer door not locking properly or the lock mechanism not engaging
  • The washer continuing to operate with the door open

Causes of a bad door switch can include wear and tear from frequent use, damage from repeated opening and closing of the door, electrical faults such as short circuits, or physical damage from mishandling or impact.

This OEM Whirlpool part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.

This part fixes the following symptoms
  • Will not drain
  • Pumps but will not spin
  • Timer will not advance
  • Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You Sometimes the washer wouldn't start the wash cycle when the fill cycle was done it would just sit until the lid was picked up or bumped   Eugene N. • Roswell , NM • August 28, 2016

The lid shut-off switch is located behind the lid How About That. I order the plastic ball the hold the lid in place plus the lid shut off switch. I watched the video that AppliancePartsPros.com has on how to replace the lid and the plastic balls. I removed the lid to get to the two philips head screws to remove that part of the shut-off switch. I took the new switch out of the package and compared it to the old switch. I assembled the switch just like the old switch look using the new... Read more

More
$22.53
Compare At:
$32.43
You Save:
$9.90

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Admiral Dryer Door Switch Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: W10169313

Dryer won't start or runs with door open? This door switch kit restores safety shutdown function. Simple clip-in repair takes 15-30 minutes. Video included.

This part fixes the following symptoms
  • Doesn't shut off
  • Won't start
  • Will not tumble
See more...
Do-It-Yourself Stories from Customers like You Broken timer knob worn out door switch   Kurt H. • Quakertown , PA • January 01, 2016

The timer knob simply pulls off the shaft with a solid, steady pull. Cleaned the timer cavity of lint/dust buildup. Aligned the keying flat of the shaft and knob and pushed the new knob on with careful, steady pressure until it was obviously seated. No tools required other than a vacuum. The door switch would sometimes not shut the dryer off when the door was opened. New switch came with new fast-on connectors. Replacement required opening the top cover of the dryer and hinging it up. This... Read more

More
$24.68
Compare At:
$29.37
You Save:
$4.69

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Admiral Washer Tub Bearing Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 6-2040130

Supports the inner tub for smooth spinning during wash cycles. Replace when you hear grinding noise or see water leaking from bottom center of tub.

Do-It-Yourself Stories from Customers like You Leakage from tub seal   Gabriel S. • Petaluma , CA • March 15, 2015

I ordered the tub seal and stem seal kits along with the much needed spanner wrench. After viewing the video online several times and taking notes along the way I was ready to tackle the repair. After taking everything apart, I cleaned all areas thoroughly then addressed the rusty areas and mineral deposits found in the tub. Soaking the tub in vinegar and baking soda overnight helped loosen the built up deposits enough so I could carefully scrape them off with a spatula. This was very time... Read more

More
$70.95
Compare At:
$85.14
You Save:
$14.19

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Admiral Washer Damper Pad Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 203956

Three-pad kit that cushions and stabilizes the wash tub assembly. Replace when pads are worn, compressed, or missing to restore proper vibration dampening.

Do-It-Yourself Stories from Customers like You May tag washer bumper pads wore out   Larry W. • Hookstown , PA • November 18, 2014

I ordered parts from appliance parts pro at 3:30 on Friday and they were delivered at bout noon on Saturday the next day. Took the machine apart removed the old pads. With the directions in the packages put it back together and the wife ran 5 loads of clothes through it. Works great. Was awesome to get the parts so quick Read more

More
$38.95
Compare At:
$45.96
You Save:
$7.01

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Admiral Washer Siphon Break
Genuine Whirlpool part
By: Whirlpool
Part Number: 206638

Prevents backflow of drain water into fresh water supply. Mounts on top of washer. Replace if cracked, leaking, or damaged to restore proper drainage.

Do-It-Yourself Stories from Customers like You Syphonbreak was leaking   James O. • Bryant , AL • September 04, 2015

We ordered parts from appliance parts pros and I fixed it. Read more

More
$51.62
Compare At:
$61.43
You Save:
$9.81

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Admiral Dryer Thermal Fuse
Genuine Whirlpool part
By: Whirlpool
Part Number: WP307473

Dryer won't start or heat? A blown thermal fuse cuts all power to protect against overheating. Easy 30-minute DIY fix with multimeter testing.

This part fixes the following symptoms
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Catastrophic failure of the dryer cycling thermostat in a maytag neptune super stack   Richard M. • Cornish , NH • October 19, 2020

Through 15 years of vibration, the Cycling Thermostat evidently had degraded to the point where one electrical connection or more came loose and caused a short. There is also a possibility that the Bakelite section of the Dryer Cycling Thermostat body separated from the metal base, simultaneously exposing all four connections to a short. The thermostat literally exploded into chunks and dust. There was a heavy arcing and then, thankfully, the thermal fuse blew and shut down power to the short... Read more

More
$53.21
Compare At:
$63.32
You Save:
$10.11

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Admiral Door Catch Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: LA-1003

The Door Catch Kit is an OEM part for Whirlpool dryers. It includes the door catch and the necessary mounting hardware to secure it in place. This kit ensures the dryer door remains securely closed during operation, preventing heat loss and ensuring the appliance functions efficiently.

Causes of a bad door catch include regular wear and tear, physical damage, or misalignment of the door, which can impact the catch's ability to latch properly.

Symptoms of a bad door catch include:

  • The dryer door not staying closed
  • Difficulty latching the door shut
  • The dryer stopping mid-cycle due to the door opening

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Door won't close
  • Shuts off too soon
  • Doesn't shut off
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You Door clip to my dryer broke   Richard D. • North Dinwiddie , VA • March 15, 2014

Ordered a new clip and installed it. Easy to do. Unplugged the dryer. Removed the front. It is only held on by two screws. Removed wires to the door switch. removed the female end (it had the broken male piece in it. Inserted the new female part in the front, clipped in the male part into the door and reconnected the door switch wires, screwed the front back on. Job done. Total time was less than 10 minutes. Works like new. Read more

More
$25.76
Compare At:
$30.40
You Save:
$4.64

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Admiral Dryer Thermal Fuse
Genuine Whirlpool part
By: Whirlpool
Part Number: WP306604

Dryer won't heat or start? This thermal fuse cuts power when temperatures get too high. Test with a multimeter for continuity. Easy DIY repair.

This part fixes the following symptoms
  • Won't start
  • No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You Maytag gas dryer was not heating   Christopher P. • Los Angeles , CA • October 04, 2014

Did some dryer repair research (dryer not heating) on the internet. Bought an ohm meter, opened up the dryer and tested the cut-off-T, high limit thermostat, dryer igniter, flame sensor, cycling thermostat for continuity. The igniter was bad, the other parts tested ok. Went online to AppliancePartsPros.com searched for a new igniter for my specific dryer model, found the right replacement igniter and watched the video on how to replace the igniter. Because my dryer is old (15+ years) and I... Read more

More
$29.48
Compare At:
$35.08
You Save:
$5.60

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Admiral Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90767

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

  • Loose or wobbly components within the appliance
  • Panels or parts that are not securely attached
  • Rattling or unusual noises due to loose parts
  • Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Certain buttons were'not working   Brent T. • Easton , MD • November 17, 2014

One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS! p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more

More
$7.56
Compare At:
$8.90
You Save:
$1.34

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Admiral Spring Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 202718

This factory spring kit restores the designed tension and return action in the affected assembly so moving parts operate smoothly, stay in position, and wear evenly over time.

  • Provides the correct counterforce to position or balance components
  • Maintains steady tension to prevent drift, slamming, or misalignment
  • Helps reduce squeaks, chatter, or uneven movement from fatigued springs
  • Typical signs of failure: weak return, inconsistent movement, excess noise, or visible spring damage
What's included: Manufacturer-supplied spring kit components. Installation notes:
  • Disconnect power; shut off water or gas before servicing
  • Wear eye protection—springs are under tension
  • Note original spring anchor points and replace all springs in the kit as a set
  • Use appropriate pliers or a hook tool; verify smooth operation before reassembly

Do-It-Yourself Stories from Customers like You Washer would only spin.   Byron V. • Bellevue , MI • February 04, 2020

Found the wonderful parts diagrams you most generously share online and a couple of YouTube videos . I determined it should be repairable. In my cast the agitator shaft was frozen (rusted) in place. I was very fortunate to have been able to eventually remove it with the use of a lot of BP penetrating oil and heat. Long and short the replacement parts fit perfectly and the washer is running like new. Special thanks to the online support make my repair possible. Read more

More
$13.16
Compare At:
$14.48
You Save:
$1.32

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Admiral Internal-Bias Thermostat (Dryer)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387137

This internal-bias thermostat regulates dryer drum temperature by cycling the heat on and off, helping maintain consistent drying performance and protect against overheating.

  • Controls the cycling temperature of the heating circuit to prevent underheating or overheating
  • Helps resolve symptoms like no heat, not enough heat, long dry times, or temperature swings
  • A faulty thermostat may cause overheating that can trip the thermal fuse
  • Located on the blower housing on many models
What's included: 1 internal-bias thermostat Install notes:
  • Disconnect power and shut off gas (for gas dryers) before servicing
  • Access the blower housing; note wire positions and transfer one at a time
  • Mount the thermostat flush to the housing for proper sensing
  • After installation, run a test cycle to verify proper heating

This part fixes the following symptoms
  • Too hot
See more...
Do-It-Yourself Stories from Customers like You Thermal fuse blew   John P. • Palm Coast , FL • January 02, 2016

Cleaned exhaust duct, but only from the dryer/laundry room side. Replaced thermal fuse. Unit worked for about two loads and thermal fuse blew again. This time I cleaned the exhaust vent on the roof of my 2-story house. It was found to be partially obstructed and I was able to remove a significant amount of lint from it. Also, I researched the problem and followed someone's advice to replace the cycling thermostat together with the thermal fuse if the thermal fuse blows. So far it has been... Read more

More
$62.61
Compare At:
$74.51
You Save:
$11.90

IN STOCK
Ships Today Guaranteed
Add to Cart

Admiral washer dryer combo replacement parts are essential for keeping your laundry appliance running smoothly and efficiently. These parts play a crucial role in ensuring that your washer dryer combo operates at its best, providing reliable performance and convenience in your laundry routine. When it comes to Admiral washer dryer combo parts, having access to quality and compatible replacements can make all the difference in maintaining the functionality of your appliance.

Your washer dryer combo is a vital household appliance that handles both washing and drying tasks in one unit, saving space and simplifying laundry day. To keep it running optimally, replacement parts like belts, pumps, and motors are essential. These components work tirelessly behind the scenes to ensure your Admiral washer dryer combo functions seamlessly, so you can count on it load after load.

Choosing OEM replacement parts guarantees that the components are specifically designed for your Admiral model, ensuring a perfect fit and long-lasting performance. OEM parts maintain the original quality and compatibility, offering peace of mind that your appliance will continue to operate like new.

Whether it's a new water pump, drum belt, or control board, having reliable replacement parts readily available helps you avoid downtime and keeps your laundry routine on track. Rest assured, you can find high-quality Admiral washer dryer combo replacement parts that will keep your appliance running efficiently and effectively for years to come.

More

Popular Admiral Washer Dryer Combo Models

  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store