Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Admiral Washer Support Parts

Best Seller
Admiral Suspension Rod Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: W10780048

The Suspension Rod Kit is an OEM replacement part for Whirlpool washing machines, designed to provide support and stability to the washer drum. This kit includes four suspension rods that connect the washing machine drum to the frame, allowing for controlled movement and reducing vibration during the spin cycle. These rods play a critical role in absorbing the motion of the washer drum, ensuring smooth operation and preventing excessive noise or movement that could damage the machine or affect its performance.

Causes of these issues often stem from normal wear and tear, as the suspension rods can become worn out or damaged over time. Heavy or uneven loads can also put extra stress on the rods, leading to premature failure.

Symptoms of a bad part:

  • Excessive noise or vibration during operation
  • Shaking or movement of the washer
  • Unevenly washed clothes or excessive wrinkles

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Whirlpool washer model number wtw4800xq2 went off balance banging and bouncing around all of the time   Jessica B. • Riverview , MI • November 13, 2019

After looking up the model number of my washing machine on AppliancePartsPros.com I ordered the suspension rod kit, two sets of tub centering springs (one spring per corner), a Ring-Tub (mine was breaking apart due to banging around) and a spare suspension bearing kit in case I need it later. I spoke to a very helpful customer service rep on the phone just before placing my order. They have customer service representatives answering the phone late at night. I was surprised. All of my parts were... Read more

More
$59.95
Compare At:
$71.94
You Save:
$11.99

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Admiral Suspension Rods
Genuine Whirlpool part
By: Whirlpool
Part Number: W10780045

The Suspension Rods are OEM parts for Whirlpool washing machines. They are designed to support the washer's tub assembly, maintaining balance and stability during the spin and agitation cycles. These rods connect the tub to the washer's frame and help absorb vibrations, preventing excessive movement that can lead to operational issues.

Symptoms of bad Suspension Rods include:

  • Unusual vibrations or shaking during the wash cycle.
  • The washing machine "walking" or moving across the floor.
  • Loud banging noises, especially during high-speed spins.
  • The tub sagging or tilting more than usual when loaded.

Causes of bad suspension rods can include wear and tear from normal use, stress from unbalanced loads, or degradation of the material properties over time.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Washer shook uncontrollably during spin cycle unit about 4 years old.   John H. • Nauvoo , IL • September 26, 2017

Replaced suspension springs/rods and all associated bushings in the kit. Read more

More
$72.55
Compare At:
$87.89
You Save:
$15.34

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Admiral Tub Suspension Pads
Genuine Whirlpool part
By: Whirlpool
Part Number: 285744

The Tub Suspension Pads are an OEM part for Whirlpool washing machines. These pads are designed to provide cushioning and stability to the washer tub, reducing vibration and noise during the wash and spin cycles. This kit contains three pads, each 2 1/4 inches long

Over time, the tub suspension pads can wear out or deteriorate, especially with frequent use or heavy loads. Exposure to harsh chemicals or unbalanced loads can also cause the pads to lose their effectiveness.

Symptoms of bad tub suspension pads include:

  • Excessive vibration or shaking during operation
  • Loud banging or thumping noises during the spin cycle
  • The washer moving or "walking" across the floor
  • Uneven or poorly balanced loads leading to inefficient washing

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You It was dancing around the floor when it went into the spin cycle   Harry W. • Landisburg , PA • January 19, 2020

First went through the troubleshooting guide on the website and read the various stories and watched the repair videos for replacing the springs and suspension pads. Then before ordering any parts disassembled the machine only to the point of removing the cabinet to see if there were any obvious issues. The springs appeared OK but I couldn't tell of they were fatigued or not and all were in place but the tub suspension pads were definitely worn out. I then put the machine back together and went... Read more

More
$13.95
Compare At:
$16.46
You Save:
$2.51

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Admiral Suspension Bearing Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: W10440729

The Suspension Bearing Kit is an OEM part for Whirlpool washing machines. It is designed to support the tub assembly and ensure smooth, stable operation during the wash cycle. The kit includes bearings and other components that help absorb vibrations and reduce noise, contributing to the longevity and efficiency of the machine. The 8-piece set has 4 types of suspension rod supports made of strong plastic and about 1.5 inches in diameter. 

Symptoms of a bad Suspension Bearing Kit include:

  • Unusual noise during the spin cycle,
  • Excessive vibration or "walking" of the washer,
  • The washing machine drum sagging or appearing off-balance.

Causes of suspension bearing failure often involve wear and tear from regular use, overloading of the machine, or inadequate maintenance leading to deterioration of parts.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Whirlpool washer model number wtw4800xq2 went off balance banging and bouncing around all of the time   Jessica B. • Riverview , MI • November 13, 2019

After looking up the model number of my washing machine on AppliancePartsPros.com I ordered the suspension rod kit, two sets of tub centering springs (one spring per corner), a Ring-Tub (mine was breaking apart due to banging around) and a spare suspension bearing kit in case I need it later. I spoke to a very helpful customer service rep on the phone just before placing my order. They have customer service representatives answering the phone late at night. I was surprised. All of my parts were... Read more

More
$9.41
Compare At:
$11.29
You Save:
$1.88

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Admiral Snubber Ring
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21002026

The Snubber Ring is an OEM part for Whirlpool washing machines. This part dampens the vibration and noise produced during the washer's spin cycle. Positioned at the base of the tub, the snubber ring provides a cushion that absorbs the impact between the moving parts and the stationary frame of the washer. 

Over time, wear or dust on the snubber ring can reduce its effectiveness, causing increased vibration, noise, and stress on the washing machine components, possibly leading to premature failure.

Symptoms of a bad Snubber Ring include:

  • Unusual noise during the spin cycle
  • The washing machine vibrating more than usual or "walking" across the floor
  • Increased wear and tear on other components due to excessive vibration

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms
  • Shakes and moves
  • Noisy
  • Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You Loud knocking and rattle while in spin cycle.   Daniel K. • Grafton , WI • July 30, 2017

18 year old Maytag Atlantis top load washer had a load knocking and rattle sound with excessive vibration when the tub was spinning, but not when it was agitating. They was no water leaking. I took the front panel off and carefully listened while I ran a cycle and the loud sound sounded like it was coming from the drain pump. So I took off the drive belt and noticed that it was glazed and that there was belt material on the drain pump and tub transmission pulleys. I removed the drain pump and... Read more

More
$9.95
Compare At:
$11.84
You Save:
$1.89

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Admiral Suspension Pad Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 285219

The Suspension Pad Kit is an OEM part for Whirlpool washers. It is a kit that includes 3 suspension pads designed to provide stability and reduce vibration during the washer's operation. These pads are designed to absorb shocks and prevent excessive movement.

You should replace the suspension pad kit if the pads become worn out or damaged. Causes of bad suspension pads can include regular wear and tear, overloading the washer, or continuous exposure to high levels of vibration and movement.

Symptoms of bad suspension pads include:

  • Excessive shaking or vibrating during the wash or spin cycles
  • Loud banging noises coming from the washer
  • The washer moving or "walking" during operation
  • Uneven or unbalanced loads despite proper loading

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You It was dancing around the floor when it went into the spin cycle   Harry W. • Landisburg , PA • January 19, 2020

First went through the troubleshooting guide on the website and read the various stories and watched the repair videos for replacing the springs and suspension pads. Then before ordering any parts disassembled the machine only to the point of removing the cabinet to see if there were any obvious issues. The springs appeared OK but I couldn't tell of they were fatigued or not and all were in place but the tub suspension pads were definitely worn out. I then put the machine back together and went... Read more

More
$23.95
Compare At:
$28.50
You Save:
$4.55

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Admiral Suspension Rod Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: W11217817

The Suspension Rod Kit is an OEM part for Whirlpool washing machines. This kit includes four suspension rods that support the washer tub and help absorb vibrations during the spin cycle. These rods ensure the tub remains balanced, providing smooth and quiet operation.

You should replace the suspension rods if they become worn or damaged. Over time, heavy loads, unbalanced loads, or general wear and tear can cause the rods to lose their ability to stabilize the tub effectively. This can lead to excessive vibrations and noise during the wash cycle.

Symptoms of a bad suspension rod kit include:

  • Excessive shaking or vibrating during the wash cycle
  • Loud banging or knocking noises
  • Washer tub not staying centered
  • Washer moving or walking during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Banging and stopping out of balance   Gary T. • Creal Springs , IL • February 22, 2024

Replaced suspension rods. Read more

More
$86.95
Compare At:
$102.60
You Save:
$15.65

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Admiral Damper Pad Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 203956

The Damper Pad Kit is an OEM part for Whirlpool washing machines. The kit includes three specially designed pads made of durable materials. These pads effectively dampen vibrations, providing cushioning and stability to minimize noise and ensure a smoother operation of the washing machine. Additionally, the kit includes three tubes of poly-lube grease. This grease lubricates the contact points between the damper pads and the machine's framework.

Causes of a faulty damper pad kit can include wear and tear over time, damage due to heavy loads or mishandling, or degradation of the pads and lubrication.

Symptoms of a bad damper pad kit may include:

  • Excessive noise or rattling during washing or spinning
  • Increased vibrations or movement of the washing machine
  • Visible wear or damage to the existing pads

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

 

Do-It-Yourself Stories from Customers like You May tag washer bumper pads wore out   Larry W. • Hookstown , PA • November 18, 2014

I ordered parts from appliance parts pro at 3:30 on Friday and they were delivered at bout noon on Saturday the next day. Took the machine apart removed the old pads. With the directions in the packages put it back together and the wife ran 5 loads of clothes through it. Works great. Was awesome to get the parts so quick Read more

More
$33.95
Compare At:
$42.01
You Save:
$8.06

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Admiral Suspension Rod Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: W10780051

The Suspension Rod Kit is an OEM part for Whirlpool washers. This kit contains the suspension rods that connect the outer tub to the base of the washing machine, providing support and stability during the wash cycles. Each rod measures 23-1/4"L x 1-1/2" in diameter, designed to handle heavy loads.

Symptoms of worn or damaged suspension rods may include:

  • Excessive vibration or shaking during spin cycles
  • Loud banging or thumping noises
  • Leaks due to increased stress on tub components
  • The washing machine walking or moving excessively

Causes of suspension rod failure can include normal wear over time, impact or damage from overloading, or improper leveling and installation.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.

Do-It-Yourself Stories from Customers like You Tub was banging against the side of the washer   Chris Z. • Lewisburg , TN • August 11, 2014

Rebalanced the load but noticed the drum was sitting lower and the springs were wore out and it went out of balance easy, so i got the suspension rod kit and installed it and it works much better. It took me 2 hours because i didnt have adequate room to move around. Hour job if you have room. Read more

More
$100.95
Compare At:
$121.14
You Save:
$20.19

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Admiral Skate Plate
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3946509

Includes suspension pads.

More
$92.51
Compare At:
$110.61
You Save:
$18.10

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Admiral Assembly Centerpost **Nla*
Genuine Whirlpool part
By: Whirlpool
Part Number: 21001713

 

More
Admiral Tub Support
Genuine Whirlpool part
By: Whirlpool
Part Number: 35-2023

 

More
Admiral Tub Suppor
Genuine Whirlpool part
By: Whirlpool
Part Number: 35-2529

 

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store