Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Parts for Ge GTDX185ED4CC: Backsplash, Blower & Motor Assembly Parts

Parts for Ge GTDX185ED4CC: Backsplash, Blower & Motor Assembly Parts

Location on Diagram
Part Description
Price & Availability
3
By: Ge
Part Number: WE19X20571
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

4
By: Ge
Part Number: WE19X20572

Plastic end cap for dryer drum or control panel. Replaces cracked, broken, or missing caps. Covers exposed edges for a finished appearance.

More
$12.88

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
7
Product photo
4.9 (19)
By: Ge
Part Number: WE01X20375
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

13
By: Ge
Part Number: WE19X20674
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

19
Product photo
5.0 (5)
By: Ge
Part Number: WE01X20379

This replacement control knob in bisque restores smooth, reliable control of your dryer's settings. It attaches to the control shaft so you can choose cycles and options when the original knob is cracked, stripped, or missing.

  • Mounts to the D-shaped control/timer shaft to select dryer cycles and settings
  • Replaces damaged or missing knob for proper engagement and feel
  • Helps resolve knobs that spin freely, won't turn the shaft, feel loose, or fall off
  • Refreshes the console with a matching bisque finish
What's included: 1 bisque control knob Install notes:
  • Disconnect power before servicing
  • Pull the old knob straight off; remove any broken insert pieces from the shaft
  • Align the flat side of the shaft with the knob insert and press on until fully seated
  • Do not force; address that before installing the new knob

More
$20.72

IN STOCK
Ships Today Guaranteed
Add to Cart
35
Best Seller
Product photo
4.8 (54)
By: Ge
Part Number: WE4M416

Dryer won't start when you press the button, or stops when released? The push-to-start switch often fails. Easy 20-minute DIY repair with video.

More
$29.95

IN STOCK
Ships Today Guaranteed
Add to Cart
72
Product photo
By: Ge
Part Number: WE19M1481

Replacement rear panel for dryers. Restores the cabinet's back surface when the original is dented, rusted, cracked, or damaged. Secures and protects internal wiring and components.

More
$65.66

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
75
Product photo
4.7 (3)
By: Ge
Part Number: WE2M173

Replacement screw for securing dryer components like drum supports, panels, and housings. Needed when screws are lost, stripped, or damaged during repair.

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

85
Product photo
5.0 (2)
By: Ge
Part Number: WE4M399

Fix a dryer that won't cycle wrinkle care properly with this wrinkle care on/off switch. Simple 5-minute installation for most DIYers. Restores function.

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

87
Product photo
By: Ge
Part Number: WE4M407

Fix a dryer that overheats or won't heat properly with a new temperature switch. Controls heat settings across multiple cycles. DIY-friendly repair.

More
$112.45

IN STOCK
Ships Today Guaranteed
Add to Cart
100
Best Seller
Product photo
4.9 (303)
By: Ge
Part Number: WE4M533

Fix a dryer that won't advance cycles or stops mid-cycle with this timer control assembly. Easy DIY repair with simple panel removal in under an hour.

More
$88.95

IN STOCK
Ships Today Guaranteed
Add to Cart
201
Best Seller
Product photo
5.0 (1)
By: Ge
Part Number: WE16X20393

Dryer barely blowing air or taking forever to dry? A worn blower wheel fails to pull air through the drum. This wheel restores airflow for efficient drying.

More
$46.95

IN STOCK
Ships Today Guaranteed
Add to Cart
203
Product photo
By: Ge
Part Number: WE13X200

Secures the drive motor to its mounting bracket. Replace if cracked, broken, or missing to keep the motor and blower aligned and stable during operation.

More
$8.95

IN STOCK
Ships Today Guaranteed
Add to Cart
205
By: Ge
Part Number: WE13M39

Metal bracket that secures the dryer motor and blower assembly in place. Replace if your mounting bracket is cracked, broken, or causing loose components.

More
$42.23

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
206
By: Ge
Part Number: WE2M200

Secures the ground wire to the dryer cabinet for safe electrical connection. Replace if missing, stripped, or corroded to restore proper grounding.

More
$11.14

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
213
By: Ge
Part Number: WE12M53

Decorative top trim panel that covers the dryer's upper edge. Replace if your trim is cracked, chipped, discolored, or missing for a clean finish.

More
$78.78

IN STOCK
Ships Today Guaranteed
Add to Cart
215
Product photo
5.0 (1)
By: Ge
Part Number: WE03X20434

Supports the idler pulley to maintain proper belt tension in your dryer. Replace if the arm is warped, cracked, or causing belt tracking issues.

More
$85.36

IN STOCK
Ships Today Guaranteed
Add to Cart
216
Best Seller
Product photo
4.7 (7)
By: Ge
Part Number: WE03X31620

Idler pulley for dryer drum assembly. Maintains belt tension to enable smooth drum rotation. Replace if worn, cracked, or causing noise during operation.

More
$33.95

IN STOCK
Ships Today Guaranteed
Add to Cart
218
Product photo
5.0 (3)
By: Ge
Part Number: WE09X27636

Seals the blower-to-exhaust duct connection in your dryer. Replace if torn, brittle, or causing heat loss and longer dry times. Confirm fit by model.

More
$8.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
219
Product photo
By: Ge
Part Number: WE14X20392
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

223
Product photo
By: Ge
Part Number: WE2M189

Replacement screw for dryer panels and brackets. Secures loose or rattling components. Restores stable fastening when original is missing or stripped.

More
$9.88

IN STOCK
Ships Today Guaranteed
Add to Cart
228
Product photo
5.0 (2)
By: Ge
Part Number: WE14X20421

Replaces a cracked, rusted, or disconnected exhaust duct that routes hot air from your dryer to the home vent. Restores proper airflow and venting.

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

230
Best Seller
Product photo
4.8 (9)
By: Ge
Part Number: WE4M216

Dryer won't heat, overheats, or shuts off mid-cycle? A faulty cycling thermostat often causes these issues. Easy DIY fix with our video guide.

More
$88.66

IN STOCK
Ships Today Guaranteed
Add to Cart
231
Product photo
By: Ge
Part Number: WD02X10057

This hex washer-head screw secures dishwasher components like brackets, shields, and panels. Replacing a stripped or missing screw restores a tight fit and helps prevent vibration, rattling, and loose parts during operation.

  • Fastens parts where a #10-16 x 1/2-inch hex washer-head screw is specified
  • Secures brackets, panels, and assemblies to the tub or frame
  • Helps resolve symptoms like loose panels, vibration, or rattling noises
  • Restores proper hold when the original screw is stripped, missing, or damaged
What's included: 1 screw.
  • Disconnect power and shut off water to the dishwasher before servicing
  • Match length and thread to the original; replace screws one at a time to maintain alignment
  • Start threading by hand to avoid cross-threading; tighten snugly—do not overtighten, especially into plastic
  • Verify no wires or hoses are pinched before reassembly
Specs (for match-up):
  • Size: #10-16 x 1/2 inch
  • Head: hex washer-head
  • Type: AB tapping screw

More
$15.95

IN STOCK
Ships Today Guaranteed
Add to Cart
232
Product photo
By: Ge
Part Number: WE2M202

Replacement mounting screw for dryer panels and components. Needed when original screws are stripped, missing, or damaged during repair or maintenance.

More
$12.38

IN STOCK
Ships Today Guaranteed
Add to Cart
233
Product photo
By: Ge
Part Number: WE13X20394

This motor plate is the stamped metal mounting plate that secures the motor assembly and keeps it aligned for smooth operation. It restores proper motor positioning and reduces vibration-caused noise or wear. What it does:

  • Provides a stable mounting surface for the motor assembly
  • Maintains motor alignment to ensure smooth shaft rotation
  • Helps reduce excess vibration and noise from a loose or damaged motor support
  • Supports related components so belts and pulleys track correctly
What's included: One motor plate Install notes:
  • Disconnect power before starting any repair to avoid shock or injury
  • Installation requires basic hand tools and access to the motor compartment
  • Verify motor and surrounding hardware are undamaged; replace any worn fasteners

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

234
4.8 (21)
By: Ge
Part Number: WE2M96
$13.95

IN STOCK
Ships Today Guaranteed
Add to Cart
235
Product photo
By: Ge
Part Number: WE2M307

10-16 x 1/2 mounting screw secures panels, brackets, and internal components in your dryer. Replace when stripped, missing, or corroded for stable assembly.

More
$12.47

IN STOCK
Ships Today Guaranteed
Add to Cart
237
Product photo
By: Ge
Part Number: WD02X10057

This hex washer-head screw secures dishwasher components like brackets, shields, and panels. Replacing a stripped or missing screw restores a tight fit and helps prevent vibration, rattling, and loose parts during operation.

  • Fastens parts where a #10-16 x 1/2-inch hex washer-head screw is specified
  • Secures brackets, panels, and assemblies to the tub or frame
  • Helps resolve symptoms like loose panels, vibration, or rattling noises
  • Restores proper hold when the original screw is stripped, missing, or damaged
What's included: 1 screw.
  • Disconnect power and shut off water to the dishwasher before servicing
  • Match length and thread to the original; replace screws one at a time to maintain alignment
  • Start threading by hand to avoid cross-threading; tighten snugly—do not overtighten, especially into plastic
  • Verify no wires or hoses are pinched before reassembly
Specs (for match-up):
  • Size: #10-16 x 1/2 inch
  • Head: hex washer-head
  • Type: AB tapping screw

More
$15.95

IN STOCK
Ships Today Guaranteed
Add to Cart
240
Product photo
4.5 (2)
By: Ge
Part Number: WE1M280

Replacement mounting screw for dryer panels, brackets, and components. Needed when screws are missing, stripped, or damaged during repairs or disassembly.

More
$17.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
461
By: Ge
Part Number: WZ4X230D

Replace missing or stripped mounting screws in your washer dryer combo. This 12-pack secures panels, components, and internal parts during assembly or repair.

More
$20.46

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
502
Product photo
5.0 (2)
By: Ge
Part Number: WE2M174

This replacement screw secures appliance panels and internal components per your model's hardware list. Replace lost or stripped screws to keep assemblies tight, reduce vibration and rattles, and maintain proper alignment.

  • Fastens brackets, covers, and sheet-metal panels as specified in the parts diagram
  • Restores proper fit when an original screw is missing, stripped, or damaged
  • Helps eliminate rattling or vibration from loose hardware
  • Keeps components safely in place during operation
What's included: 1 screw Install notes:
  • Disconnect power to the appliance before servicing
  • Match length, head style, and thread to the original; install in the same location/quantity
  • Start threads by hand to avoid cross-threading; tighten with the correct driver
  • Do not overtighten, especially into plastic or thin sheet metal

More
$12.38

IN STOCK
Ships Today Guaranteed
Add to Cart
630
Best Seller
Product photo
4.7 (26)
By: Ge
Part Number: WE17X22217

Dryer won't start, stops mid-cycle, or runs backward? The drive motor powers drum rotation. Moderate difficulty repair requires disassembly. Video guide.

More
$173.95

IN STOCK
Ships Today Guaranteed
Add to Cart
631
5.0 (1)
By: Ge
Part Number: WE1M650
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

803
Best Seller
Product photo
4.9 (69)
By: Ge
Part Number: WD21X10261

The Interlock Switch is an OEM replacement part for GE electric and gas dryers. This safety component monitors the door closure, preventing operation if the door is not securely closed and latched. The switch measures 2 inches long and 1/2 inch wide.

Symptoms of a faulty interlock switch include:

  • Dryer failing to start or running with the door open  
  • Timer display not illuminated when start button is pressed  
  • Inability to open the dryer door during operation
  • Dryer suddenly stopping mid-cycle before fully drying clothes

Causes relate to the internal component contacting the door frame over 50,000 open/close cycles potentially exposing wiring to wear. Regular cleaning the external switch area prevents dust or lint buildup skewing performance. 

This genuine GE switch is compatible with Hotpoint and RCA dryers as well.

Note: Can be used as a dishwasher door switch on specific models. Check your model number for the most accurate results.

More
$28.95

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google