Parts for Bosch SHE89PW55N/01: Baskets Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Fix poor cleaning on top rack dishes with this dishwasher spray arm water supply tube. Directs water to spray arms. DIY install in 10-15 minutes.

Replacement spray arm for dishwashers. Snaps into the rack to distribute water through multiple jets. Replace if broken, cracked, or missing clips.

Dishes coming out grimy or glasses gritty? A clogged or worn lower spray arm prevents proper cleaning. Simple 10-minute fix with no tools required.

The Cover is an OEM part for Bosch dishwashers. It provides a protective barrier that shields internal components from damage and extends the life of the appliance.

The cover is exposed to heat, humidity, and debris during each wash cycle. Over time and repeated use, these conditions can cause cracks, warping or breakdown of the protective plastic material.

Causes of a bad cover include normal wear and tear, accidental dents or punctures, and exposure to excess heat or chemicals.

Symptoms of a cover needing replacement include:

• Visible cracks or holes that compromise the barrier
• Loose or sagging fit that allows internals to be exposed
• Warping or melting of the protective plastic shield

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Spray Head is an OEM replacement part for Bosch dishwashers. It directs pressurized water along the dish racks, targeting every inch of dishware and cookware. Consistent coverage cleans thoroughly without waste.   

Symptoms of a bad spray head can include clogged nozzles, inconsistent patterns, or spray heads that do not oscillate and rotate properly through cycles. Mineral deposits pose blockage risks over time.

Causes of a bad spray head include:

• Uneven or skipped areas of spray coverage inside the machine
• Rotating/oscillating mechanisms that jam or continuously stick  
• Nozzles fully or partially blocked reducing water pressure
• Head assembly detaching from water tub wall or bracket

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Screens out small food particles from wash water to prevent debris recirculation. Replace when clogged or mineral-crusted. Confirm fit by model number.

Captures debris before it enters the pump system. Replace when clogged, calcified, or damaged to prevent E22 errors and ensure clean dishes. Verify fit.

This dishwasher crockery basket holds and organizes flatware and small items during the wash cycle. Replacing a damaged basket helps keep pieces upright, prevents items from slipping through, and supports consistent cleaning results.

• Organizes and separates silverware so wash spray reaches all surfaces
• Helps keep small items from falling into the tub, sump, or spray arm area
• Restores stable storage when the original basket is cracked, warped, or missing
• Common symptoms: broken grid walls, missing sections, sharp edges, or utensils tipping over

• Turn the dishwasher off and allow any hot surfaces to cool before reaching inside
• Lift out the old basket from the lower rack and set the new basket in the same location or hooks
• Ensure the lower spray arm spins freely with the basket in place
• Load utensils per your owner's manual to avoid blocking spray or causing damage

Replacement door handle for Bosch dishwashers. Installs on the front door panel. Order if your existing handle is cracked, broken, or loose.

The Holder is an OEM component specifically designed for select Bosch dishwashers. Located inside the lower rack, it secures serving utensils during washing to prevent accidental damage. 

Through precision engineering, the holder maintains a safe yet flexibly adjustable design. This allows tool placement in multiple orientations, maximizing utility based on the specific items being washed. Its stability ensures forks, spoons, and spatulas remain neatly stored away from spinning arms below.

Causes of a bad holder can include warping and bending due to wear over time or utensils placed beyond weight limits. Potential holder damage risks impeding cleaning performance or snagging on rack components. 

Symptoms of a bad holder include:

• Loose or unstable connection points inside the rack 
• Inability to properly secure utensils during wash cycles
• Utensils jamming or scraping the bottom of the tub

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers. Replace to restore organized utensil storage and protection.
 

Secures the tine row assembly inside your dishwasher rack. Replace this small plastic holder if it's broken, cracked, or missing to prevent wobbly tines.

This is the shelf insert used in select Bosch appliances. It fits into the shelf/tray frame to restore a flat, stable storage surface and help contain spills, so items sit level and the shelf supports its intended load.

• Sits inside the shelf frame/tray to create the usable storage surface
• A cracked, chipped, bowed, or missing insert can cause an uneven shelf or reduced load support
• Visible damage, instability, or difficulty sliding the shelf in/out are common signs it needs replacement
• Built to match the original insert's footprint for proper fit in compatible models

• Empty the shelf and carefully remove the shelf/tray from the appliance before swapping the insert
• Handle glass with care; wear cut-resistant gloves to avoid injury
• Clean the shelf frame and seat the new insert fully before reinstalling the shelf
• Avoid forcing parts against liners or trim

Secures adjustable tines in the dishwasher rack to keep dishes stable during wash cycles. Replace if cracked, broken, or missing to restore proper rack function.

Replacement tine row holder for dishwasher upper rack. Securely holds retractable tines in place. Replace if cracked, broken, or missing from wear.

Secures and positions internal components in your dishwasher. Replace this holder if cracked, broken, or missing to restore proper fit and stability.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Left side

The Dishrack Slide Rail is an OEM part for Bosch dishwashers. This part provides the metallic rails that the dish racks smoothly glide along during loading and unloading. Its precision-engineered design facilitates quiet and reliable extension and retraction of racks for easy access to washed items.

Causes of a bad Dishrack Slide Rail out include wear from continual use and damaging rails or their components over time. Damage from impacts or weight could also diminish rack movement.

Symptoms of issues include:

• Difficulty fully extending or retracing the racks
• Noisy, grinding rack operation
• Racks that do not smoothly slide or become stuck partially out

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Fix a top rack that falls off the tracks or won't roll smoothly. This dishrack rail assembly includes rollers. Moderate DIY repair, about 5-10 minutes.

Secures tines within your dishwasher rack for proper dish organization. Replace if cracked, broken, or clips have failed causing tine rows to fall down.

The Dishrack Insert is an OEM replacement part for Bosch dishwashers. It provides the necessary support structure to hold dishes securely in place during washing cycles. The insert is designed with flexible prongs and slots to accommodate a variety of dishes, glasses, and cookware.

Symptoms of a bad dishrack insert include:

• Dishes shifting or toppling over during spinning
• Difficulty loading dishes due to a worn or faulty insert
• Scratches or chips on dishes from contact with a damaged insert

Causes of a bad insert can be normal wear over time as the flexible prongs bend and warp with repeated use. Transport or installation issues may also cause damage.

This OEM Bosch replacement part is compatible with Thermador, Gaggenau, and some Kenmore models as well. 

Replaces cracked, rusted, or broken tine inserts in your dishwasher rack. These prong plates separate and hold dishes securely during wash cycles.

Secures tine rows to your dishwasher rack. Replace if broken, cracked, or missing to keep tines upright for proper dish spacing. Clips onto rack.

Replacement cup rack for dishwashers. Installs inside the tub to hold cups and mugs during wash cycles. Replace if prongs are broken or plastic is cracked.

Replacement silverware basket for Bosch dishwashers. Sits in the lower rack to organize utensils during wash cycles. Order if yours is cracked or missing.

Third-rack cutlery drawer for dishwashers. Organizes silverware and small utensils in dedicated top rack space. Replace broken, cracked, or missing trays.

Small mounting bracket that secures internal dishwasher components. Replaces worn, broken, or missing brackets to keep assemblies stable and aligned.

Secures internal dishwasher components to maintain proper alignment and reduce movement. Replace when original bracket is cracked, deformed, or worn.

Factory insert for dishwasher assemblies. Supports, aligns, or retains mating parts. Replace if damaged, missing, or causing looseness and rattles.

Mounting holder that secures internal dishwasher components in place. Replace if cracked, broken, or missing to restore proper support and alignment.

The Bearing is an OEM component specifically designed for select Bosch dishwashers requiring stabilized rotational movement. As a friction-reducing fixture, it facilitates the smooth operation of assorted mechanisms.  

Precision-ground steel and reinforced polymer composite withstand harsh chemicals and high spinning velocities without excess heat or noise. Independent shielding maintains lubrication without contaminating surrounding compartments.

Causes requiring bearing replacement usually involve coolant deterioration building friction. Physical impacts may dislodge protective seals exposing components to intrusions no longer offering intended cushioning.

Symptoms signaling the need for a new bearing incorporate:

• Grinding or scraping noises emitting from moving joints
• Reduced cycle speeds from binding components  
• Excessive rotational resistance detected by diagnostics sensors

This OEM Bosch replacement bearing is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers relying on long-lasting suspension elements. Proper installation restores noise-dampening characteristics throughout operational stresses.

The Insert is an OEM replacement part for Bosch dishwashers. This flexible plastic insert sits inside the lower dish rack to provide optimal placement and support for dishes and cookware during wash cycles. 

Causes of a bad insert tend to be normal wear from regular loading/unloading of racks over extended use. Excessive warping could potentially affect wash performance.

Symptoms of a bad insert include:

• Dishes allowed to shift or tip during energetic wash or rinse cycles
• Difficulty properly spacing and supporting various dishes  
• Rack appearance becoming damaged or unsightly

This OEM Bosch replacement part is also compatible with Siemens, Thermador, and some KitchenAid dishwasher models. 

Fix rusted or broken dishwasher tines with this tine row insert. Solves rust spots and detached tines on dish racks. Easy 10-minute repair with basic tools.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.