Parts for Ge GDF540HSD0SS: 02 - Body Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Replacement door spring for dishwashers. Provides tension to help the door open and close smoothly. Replace if broken, worn, or door won't stay open.

Replacement door spring for dishwashers. Balances door weight for smooth opening and closing. Replace if spring is broken, stretched, or missing.

Adjustable leveling leg for dishwashers. Screws into the base frame to set height and stabilize the unit. Replace if worn, broken, or missing.

Dishes not drying or staying wet after cycle? This heating element heats water during wash and dries dishes after rinse. DIY-friendly replacement part.

Secures the dishwasher heating element to the tub from underneath. Replace if cracked, stripped, or missing to prevent leaks at the element mounting point.

The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.

Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.

Symptoms of a compromised screw placement include:

• Noises or abnormal sounds coming from inside the tub  
• Intermittent error codes related to moving components
• Detached or misaligned spray arms or filters
• Insecure tub fixtures that can be jarred with normal operation 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Fixes dishwasher not draining or draining slowly. This complete pump and motor assembly kit includes circulation pump, drain pump, and wiring harness.

Replacement upper spray arm for dishwashers. Installs at the top of the tub to distribute water across the upper rack. Replace if broken, cracked, or missing.

Fix leaks at the water inlet with this dishwasher fill funnel. Directs water into the tub and prevents splashing. Includes gasket for secure seal.

Directs water from inlet to tub through the fill funnel. Replace if cracked or leaking to restore a sealed fill path and prevent water damage.

Fix leaks at the water inlet with this dishwasher fill funnel. Directs water into the tub and prevents splashing. Includes gasket for secure seal.

Conduit docking port for dishwashers. Connects wiring harness at the base of the unit. Replace if cracked, broken, or connection point is damaged.

Replaces worn tub rollers that cause racks to drag or bind. Mounts to dishwasher sidewall for smooth rack gliding. Confirm fit with your model number.

This SCR 8-18 silicon-controlled rectifier replaces the control semiconductor that switches and regulates power to heating or motor circuits in compatible appliances, restoring proper power delivery and control. It's a direct-fit electrical replacement part. What it does

• Acts as a switching device on control boards to allow or block current flow when signaled.
• Regulates power delivered to heating elements or motor circuits to enable proper operation.
• Commonly linked to symptoms like no heat or intermittent heating, motors that won't start, or erratic control-board behavior.
• Helps restore reliable on/off control when a failed SCR is causing open or shorted conditions.

• One SCR 8-18 silicon-controlled rectifier (WD02X10160).

• Always disconnect power before servicing the appliance to avoid shock.
• Handle the part carefully; avoid touching leads and use anti-static precautions if available.
• Inspect surrounding connectors and wiring for damage; replace any corroded terminals.

Connects dishwasher door to spring mechanism to prevent door from dropping when opened. Replace if cable is broken, frayed, or detached from pulley.

Door hinge pulley for dishwashers. Works with springs and cables to balance door movement. Replace if cracked, broken, or causing uneven door operation.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Size: 8-32 t. Includes 12 screws.

This bottom-front foam insulation piece replaces the damaged or missing pad under the refrigerator's front base to help maintain proper airflow and thermal separation for more consistent cooling and reduced condensation risk. What it does:

• Replaces worn or crushed insulation at the refrigerator's lower front to restore intended thermal barrier.
• Helps limit warm air intrusion at the cabinet base that can contribute to frost or uneven temperatures.
• Reduces risk of condensation on the cabinet floor and improve overall efficiency when installed correctly.
• Restores correct spacing and support for the lower access area to prevent drafts.

• Disconnect power and remove the toe grille or front access panel before attempting replacement.
• Handle foam carefully — avoid tearing and align the pad to fit flush with surrounding insulation.
• Use existing clips/adhesive or OEM-recommended fasteners; replace adhesives if brittle or missing.

Encloses the power-connection compartment at the base of your dishwasher. Replace if cracked, broken, or missing to protect wiring from debris.

Dishwasher not filling with water? A failed water inlet valve is often the cause. This valve controls water flow during wash and rinse cycles.

Hex washer head screw for dishwasher assembly. Secures internal components and panels. Replace if stripped, corroded, or missing during repairs.

Dishwasher won't start or lights are completely unlit? Main control board failure stops all functions. Moderate DIY repair restores power and cycles.

Protective lower housing for dishwasher control electronics. Replaces cracked, broken, or missing base covers. Shields wiring and components from debris.

Replaces the protective top cover for your dishwasher control box housing. Needed when the original is cracked, broken, or missing to keep electronics enclosed.

Size: 10-16 ab.

Secures washer hoses at pump, tub, and valve connections to prevent leaks and hose blow-offs. Replace worn or missing clamps for a tight seal. Confirm fit.

Size: 10-32 GXTT FLP.595 S

Dishwasher won't start or run? A faulty door latch prevents cycles from beginning. This latch assembly secures the door and activates switches. 5-10 min fix.

Seals dishwasher door perimeter to prevent water leaks during operation. Replace if you notice leaking from door sides or bottom. Easy 5-minute install.

White plastic tub trim seals the gap between cabinet and inner tub. Replace if worn, cracked, or missing to restore appearance and improve fit. Confirm compatibility with your dishwasher model.

Black trim piece that attaches to the dishwasher tub edge for a finished look. Replace if cracked, broken, or missing to restore the interior appearance.

Secure your dishwasher to the underside of countertops with this screw and button plug kit. Replace stripped, missing, or damaged fasteners.

Secures your dishwasher underneath the kitchen countertop. Replace if the bracket is cracked, broken, bent, or missing from installation.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.