Bolens Parts

C-clip retaining ring for walk-behind mowers. Snaps onto shafts to prevent side-to-side movement while allowing rotation. Replace if broken or missing.

Snap ring fastener for lawn mowers and outdoor power equipment. Secures components on shafts and axles. Replace if worn, broken, or missing.

Fix mower that won't move or has grinding noises with this 14-tooth left-hand spur gear. Essential transmission component for self-propelled models.

Replace your lawn mower's worn or damaged 14-tooth right-hand spur gear. Fits gas walk-behind, self-propelled, and hi-wheel mowers. Order now.

Fixes auger drive issues and grinding noises in snow blowers. This thrust collar supports proper auger rotation and prevents metal-on-metal wear.

Bearing cup works with cone to provide stability and support radial/axial loads in your lawn tractor. Replace if worn or damaged. Verify fit with model number.

Rubber handle grip for lawn mowers, tillers, and snow blowers. Replaces worn, cracked, or missing grips on push equipment handles for better control.

This is a knob handle that is used on various types of lawn and garden equipment. It is responsible for helping to make adjustments to the upper handle of the lawnmower or other machine. If the knob handle no longer works, is broken, or falls off, adjustments can no longer be made to the equipment. If this situation occurs, the knob handle will need to be replaced.Take a look at the knob handle and determine if it has been damaged. It could have cracks, broken areas, or excessive scratches that make it hard or impossible to use. If the knob handle is not present, this also necessitates a replacement. The part is easy to replace and requires no tools to install. Simply remove the old handle and place the new one in the same location.This is an authentic OEM replacement knob handle that is directly sourced from the manufacturer. It is sold as an individual component. The knob handle is used on lawnmowers, snowblowers, string trimmers, leaf blowers, wood chippers, and edgers. It fits various models offered by MasterCut, Yard-Man, Bolens, Montgomery Wards, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Ryobi, Cub Cadet, and Craftsman.

This knob is an OEM replacement part for MTD power equipment. The seat knob is responsible for adjusting the height of the seat to ensure a comfortable and safe position for the operator while using the lawn tractor. It is usually located on the side or the front of the seat and is connected to a shaft or linkage that controls the seat height adjustment.

Causes of a bad knob can include regular wear and tear from frequent use, exposure to harsh weather conditions, or accidental damage. These factors can lead to the knob becoming loose, cracked, or broken, making it difficult to operate the equipment effectively.

Symptoms of a bad knob include:

• Difficulty in turning or adjusting the knob
• The knob slipping or not staying in place
• Visible cracks or breakage
• The knob falling off during use

This MTD replacement part is also compatible with other brands and models within the MTD family, ensuring broad applicability for your outdoor equipment needs.

Height adjustment knob for walk-behind lawn mowers. Replaces broken, cracked, or missing knobs that control cutting deck height settings.

Oil seal prevents leaks on snowblower worm shaft and bearing flange. Replace when you notice oil leaking from the engine area. Verify fit with your model.

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be damaged or break. When this happens, the tie will need to be replaced to ensure the cable stays on the handle.If the cable tie needs to be replaced, no tools are needed. In the situation where other parts need to be replaced at the same time, a basic set of tools and a pair of work gloves may be required. Turn off the yard equipment and place it on a stable surface before replacing the broken cable tie. The old tie can be removed so the new one can be installed before further use.This cable tie is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually. The component is designed to be compatible with lawnmowers, lawn tractors, tillers, and snowblowers manufactured by MTD, Troy-Bilt, Yard-Man, and Yard Machines.

This switch spring is part of the safety system used in riding lawnmowers. This spring is located underneath the seat of all riding lawn mowers and lawn tractors. The spring is attached to two electrical contacts and is compressed when the rider is sitting on the seat. If the machine is in motion and the driver stands up or gets off the machine, the switch interrupts the power and stops the mower from moving. If the spring fails to work, it should be replaced in order to operate the mower safely. Over time and due to normal wear and tear, the spring may become warped and need to be replaced. Park the mower on a flat surface and remove the spark plug so that the lawnmower is not powered on. Look underneath the seat and locate the kill switch with a two-wire plug on one end and a round plunger button on top. Grip the wire plugs and pull them away from the switch spring. Install the new switch spring. Reattach the wires and reinstall the spark plugs. This switch spring is an authentic OEM replacement part sourced directly from the manufacturer. It is a silver metal part that is designed for use in lawnmowers manufactured by MTD, Ryobi, Bolens, Yard-Man, Troy-Bilt, Husky, and Cub Cadet.

Replacement cap for lawn mowers and tractors. Installs on various locations to cover openings or protect components. Order if your original cap is cracked, broken, or missing.

Push nut fastener for lawn tractors with 3/4-inch inner diameter. Replace if cracked, worn, or missing to secure components properly on your mower.

Ratchet fastener for lawn mowers and tractors. Secures components in place. Replace if broken, stripped, or missing to properly fasten parts together.