Bosch Cable Or Retainer

The Hinge Cable is an OEM part for Bosch dishwashers. It plays an essential role in the mechanism that controls the movement of the dishwasher door, allowing it to open and close smoothly and safely. This cable connects the door to the spring, providing the necessary tension and support to prevent the door from slamming shut or dropping open too quickly, which can be hazardous and potentially cause damage.

Symptoms of a failing Hinge Cable include:

• The dishwasher door suddenly dropping open
• Difficulty in opening or closing the door smoothly
• The door feeling unusually heavy or not staying in place when opened
• A snapping sound when trying to open or close the door, indicating a potential break

Causes of a bad hinge cable often involve fraying or snapping due to the constant tension and movement, general wear from frequent use, or corrosion from exposure to moisture and detergents.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Note: This is a Cable Kit. (Includes 2 cables)

The Cable and Spring Set is an OEM component specifically designed for Bosch dishwashers. This set includes both the cable and spring, which work together to assist in the smooth opening and closing of the dishwasher door.

Over time, cables and springs can wear out or become damaged due to repeated use or accidental mishandling. Causes of a bad cable and spring set can include wear and tear from frequent use, accidental damage, or corrosion.

Symptoms of a bad cable and spring set include:

• A loose or sagging dishwasher door
• Difficulty in opening or closing the door
• The door not staying securely in place

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Door Cable is an OEM part for Bosch dishwashers. This part connects the dishwasher door to the door spring, allowing for smooth opening and closing of the door. This cable helps balance the door’s weight and ensures it stays securely in place during operation.

Common causes of a faulty door cable include fraying or breaking from regular use, exposure to high moisture levels, or damage from improper handling.

Symptoms of a bad door cable include:

• The dishwasher door falling open quickly or not staying in place
• Difficulty in opening or closing the door smoothly
• A sagging or misaligned door
• Unusual noises when operating the door

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Roller and Cable Assembly is an OEM part for Bosch dishwashers. This assembly includes the roller and cable, which work together to facilitate the smooth operation of the dishwasher door, allowing it to open and close effortlessly.

Over time, the roller and cable can wear out or become damaged due to regular use, friction, or accidental mishandling. If either component fails, it can affect the balance and movement of the dishwasher door, making it difficult to operate.

Symptoms of a bad roller and cable assembly include:

• Difficulty in opening or closing the dishwasher door
• A sagging or misaligned door
• Unusual noises when operating the door
• The door not staying securely in place

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Door Pulley Rope is an OEM part for Bosch dishwashers. It works with the door latch mechanism, allowing smooth opening and closing of the dishwasher door. 

Causes of a bad door pulley rope can include fraying or breakage due to repeated use over time. Exposure to heat and chemicals may also damage synthetic fibers prematurely. 

Symptoms of a bad dishwasher door pulley rope include:

• Difficulty latching or sealing the dishwasher door 
• Sliding or squeaking noises coming from the door 
• The door not sitting flush or properly aligned
• The door is unable to stay fully open for loading/unloading

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Support strap that cushions and secures the dishwasher circulation motor, stabilizing the motor assembly to reduce vibration and help maintain alignment for steadier, quieter operation. Designed for circulation motors with softer bearings. What it does:

• Cushions and supports the circulation motor to limit movement and vibration and reduce motor noise.
• Secures the motor assembly to the tub/chassis to maintain proper clearance and fit.
• Helps prevent undue stress on motor bearings and mounting points that can cause premature wear.
• Commonly replaced when the strap is cracked, stretched, or no longer holds the motor firmly in place.

• Disconnect power and water supply before servicing; follow all safety and OEM service instructions.
• Remove access panels and any obstructing components to reach the circulation motor as required.
• Replace using the original mounting hardware; inspect motor mounts and bearings while accessible.
• Reassemble and run a short test cycle to confirm reduced vibration/noise and proper motor operation.

This is a replacement electrical cable harness used to restore power or signal connections inside compatible appliances. It provides a direct, OEM-style connection for reliable operation and safer performance than damaged wiring. What it does:

• Replaces damaged or frayed wiring that can cause loss of power, intermittent operation, or control failures
• Restores proper electrical connections between components to prevent shorts or erratic behavior
• Helps eliminate issues like unresponsive controls, motors that won't run, or intermittent cycle problems
• Matches the OEM routing and connector style for correct fit and reliable contact

• Disconnect power before starting any repair to avoid shock or injury
• Inspect connectors and routing; replace any retainers or clips that are damaged
• Ensure connectors are fully seated and wires are routed away from moving parts and heat sources

This holder is a replacement mounting bracket that secures a small internal component in place to restore proper alignment and support. It helps keep parts stable so the appliance operates as intended. What it does

• Secures and supports an internal component to prevent movement or misalignment
• Replaces cracked, broken, or worn mounting points that allow rattling or improper part position
• Restores stable contact where a loose component causes intermittent operation or noise
• Fits a specific OEM location; use the part number to confirm exact application

• One replacement holder/mounting bracket

• Disconnect power and water before starting any repairs
• Inspect surrounding clips or fasteners and reuse or replace as needed—this part typically snaps or screws into place
• Handle plastic mounting parts gently to avoid cracking during installation