Need Help?
Call
This part is a replacement engine exhaust tube. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current exhaust tube is broken or in any way damaged, this part can be used as a replacement. It is intended for use with several lawn tractor models.The exhaust tube connects to the muffler and the engine exhaust port and allows fumes to be properly expelled from the engine. The exhaust tube can become dented, damaged, or detached and thus may require replacement. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this exhaust tube, the appropriate owner's manual and equipment diagrams should be referred to. This exhaust tube is suitable for use on a variety of different lawn tractor models manufactured by Husqvarna and Poulan. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually
Usually ships within 4 - 14 days
Replacement fuel cap assembly for riding mowers and tractors. Seals the fuel tank to prevent leaks and contamination. Order when original cap is cracked or missing.
Replaces a cracked, broken, or missing chainsaw handguard. Installs on the front handle to engage the chain brake and protect hands during operation.
Fix a chainsaw that won't start or has weak spark with this ignition module. Generates spark power from flywheel magnet to spark plug for reliable engine starting.
This replacement part is a guide kit. This is a genuine replacement part made by Husqvarna. Guide kits are small parts that connect to the side of a lawnmower to help the user create clean lines during use. The rope is looped through the guide so that the user maintains consistent work. A new guide kit might be needed if the user is unable to maintain clean lines while cutting grass. If the guide loop is worn down and will not hold rope correctly, it might be time to replace the guide kit. This repair should be fairly simple and only require common household tools such as a screwdriver and perhaps pliers if the previous piece is stuck. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.
Replacement carburetor for gas chainsaws. Mounts to engine block to mix air and fuel. Replace if cracked, leaking, corroded, or missing parts prevent starting.
Replacement piston ring for chainsaw engines. Seals the combustion chamber and transfers heat. Replace if worn, cracked, or causing compression loss.
Gauge wheel that mounts to the mower deck to control cutting height. Replace if cracked, worn, or missing for proper deck leveling and support.
Genuine chainsaw guide bar that holds the cutting chain steady during operation. Replace if bar is worn, bent, cracked, or damaged from regular use.
Cleans fuel before it enters the carburetor, catching dirt and debris. Replace when clogged to restore peak engine performance and prevent starting issues.
This high lift blade is a type of lawnmower blade. Compared to other blades for mowers, its ends have deeper curves. This unique and distinct feature makes the blade more versatile. When you cut the grass, the deeper curved edges will eject the clippings to the bagger. A high lift blade features large wind wings that contribute to airflow. When there is an increase in air circulation, this means you can prevent grass from clogging and accumulating, especially when cutting wet and tall grass. Continuously using a high lift blade will dull its edges, which lowers its cutting efficiency. A broken or dull blade can result in unevenly cut grass. When this happens, a replacement blade should always be within reach. For a worry-free installation, be sure to have a wooden block and socket wrench. This original Husqvarna blade works with mower models from Ariens, Dixon, Craftsman, and Husqvarna. It will also work with other mowers with 46 decks. This brand-new high lift blade is sold-individually. Bolts and washers are sold separately.
Replacement pin for chainsaw assembly. Secures components and maintains proper alignment. Needed when original pin is lost, bent, or worn from use.
Replacement baffle for lawn mower decks. Directs airflow and grass clippings toward the discharge chute or bag. Replace if cracked, broken, or missing.
Replaced some baffles and the blade Read more
Attaching to the front lift link, this washer is a component for use with lawn tractors. A washer is a component that is used with a screw fastener. Its purpose is to keep the screw from loosening by distributing the load over a larger area. A new washer may be needed if the user has mistakenly misplaced the original. When dealing with small parts, it's a good idea to place them in a container so that they are not lost. The washer could physically break over time due to normal wear and tear. If this is the case, it will need to be replaced so that the screws do not loosen. The repair person may choose to wear gloves to protect his or her hands during the replacement process.This washer is sold individually. It is an OEM part that is sourced directly from the manufacturer. It's compatible with lawn tractors that are manufactured by the Husqvarna, Poulan, and Craftsman brands.
This is a 7/16-inch locking flange nut used on lawn mowers and lawn tractors. The integrated flange and locking feature help distribute load and prevent the nut from loosening under vibration. Replace this nut if it is stripped, corroded, or no longer holds securely during blade or deck component repairs.
This is a genuine replacement bolt that is designed for use with select trimmers and brush cutters. The metal hex screw is generally found on the starter cover and used to secure the cover to the trimmer to protect the internal engine components. Although the screw is durable, it can become damaged due to impact or another incident. It may also be lost in the process of other repairs or maintenance. It will need to be replaced with an OEM model like this screw for the best results. This 4x16 screw is manufactured by Shindaiwa and compatible with select machines from the brand, as well as those from Little Wonder and Echo. This metal screw is sold as an individual unit and does not include any additional parts or accessories. Replacing the starter cover screw is generally a simple task. Allow the engine to cool and disconnect the power supply. Then, use an Allen wrench to remove the old screw if it isn't already missing. Install the new screw and the job will be done. It is important to wear gloves and use the right size hex key to ensure that the screw doesn't get stripped during installation.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.