Chipper Shredder Fastener
Genuine Mtd part
By: Mtd
Part Number: 951-14073
This is a genuine OEM clamp sourced directly from the manufacturer. It is used in various lawn and garden machines to connect hoses to fittings. It is used to connect piping to water pumps, exhaust pipes to exhaust manifolds, and other similar applications. This connection prevents fluids or air from leaking from the hose. Clamps may be spring or screw/band clamps. Spring clamps require no tools to install and remove; however, the size must be more accurate than when using screw/band clamps. Screw/band clamps are adjustable and can be tightened or loosened. Screw clamps should be inspected periodically to ensure tightness and that the clamps have not rusted.Hose clamps are installed approximately 1/4 inch below the end of the hose. If two clamps are used, there should be 1/4 inch between the two bands. When using a screw clamp, loosen the screw with a screwdriver just enough to fit the clamp over the hose. If using a spring clamp, squeeze the clamp and hold it open. Slide the clamp over the hose and then attach the hose and clamp to the fitting. Slide the clamp into place at the joint and tighten. Do not overtighten. This brass-colored clamp is a spring clamp made of metal; it is sold as an individual unit. This clamp is compatible with many different types of pipes made by various manufacturers.
More
$7.95
- Compare At:
-
$8.07
- You Save:
-
$0.12
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 951-14425
Threaded stud secures carburetor to intake manifold on lawn mower and outdoor power equipment engines. Replace if stripped, corroded, or missing.
More
$11.95
- Compare At:
-
$14.10
- You Save:
-
$2.15
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: GW-9516
$7.95
- Compare At:
-
$8.00
- You Save:
-
$0.05
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 748-0234
Shield spacer for lawn tractors and riding mowers. Provides proper spacing and alignment for protective shields. Replace if missing, damaged, or worn.
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 951-14397
Secures the engine shroud in place. Replace if worn, broken, or missing to keep the shroud properly attached and ensure adequate airflow around the engine.
More
$10.26
- Compare At:
-
$11.29
- You Save:
-
$1.03
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 710-1206
Hex screw fastener for lawn tractors and outdoor power equipment. Secures components throughout the machine. Replace if stripped, overtightened, or missing.
More
$8.95
- Compare At:
-
$10.65
- You Save:
-
$1.70
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 710-1256
This hex screw is a genuine MTD part, sold individually. This hex screw can be used as a replacement part in a lawn mower, snowblower, or wood chipper.The hex screw in a lawn mower, snowblower, or wood chipper might have to be replaced if it is lost, misplaced, or damaged. The screw is a small component which can easily disappear while the appliance is in operation without necessarily noticing its absence; additionally, the screw can suffer from puncturing, scraping, denting, warping, or eroding over time. If this occurs, the screw should be replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This hex screw is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, Ryobi, Troy-Bilt, Yard Machines, Huskee, Montgomery Wards, Bolens, Yard Man, and MasterCut.
More
$6.95
- Compare At:
-
$8.34
- You Save:
-
$1.39
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 710-3085
This screw is a genuine Midwest Engine replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, vacuums, and tillers. The purpose of a screw is to link materials together by piercing into the materials and then rotating it until the materials are firmly clasped together.It is likely that a screw will have to be replaced at some point in the lifespan of an appliance due to simply losing or misplacing the screw. If the materials that are generally supposed to be held together seem to be loosening or have come apart, it is likely that the screw has either fallen out or has undergone damage that has warped it. This kind of damage can be attributed to general overuse, to age, or simply to long-term exposure. If a screw is subject to any of this kind of damage, it is best to replace it immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This screw is compatible with the following brands: MTD, Cub Cadet, Troy-Bilt, and Yard Machines. This part sold individually.
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 712-0359
This nut, or slotted nut, is a genuine MTD part. It is a replacement part for use on lawn mowers, log splitters, wood chippers, lawn tractors, and chipper shredders. It is hexagonal in shape.The uses for this nut vary greatly depending on the machine with which owners plan to use it. Generally speaking, nuts work to secure various parts of components together. Loosening and tightening most nuts can be accomplished with a wrench. Before making any repairs, be sure that the engine has completely cooled, empty the fuel tank to avoid spillage, and disconnect the spark plug or battery. Wear work gloves and other protective gear.This nut is a genuine OEM part sourced directly from the manufacturer. It is sold individually; very often, more than one nut is used on machines such as these, so be sure to check how many are needed. It is designed for compatibility with various machines made by Agway Craftsman, Cub Cadet, Duerr, MTD, Lawn Chief, OEM, Ranch King, Remington, Ryobi, White Outdoor, Yard Machines, and Yard-Man.
More
$13.95
- Compare At:
-
$16.60
- You Save:
-
$2.65
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 712-0414
Replacement fastener for lawn mowers and tractors. Secures components and panels in place. Order a new fastener if yours is stripped, missing, or damaged.
More
$6.95
- Compare At:
-
$7.34
- You Save:
-
$0.39
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 712-04287
Fastener nut for outdoor power equipment. Secures components in place during operation. Replace if stripped, corroded, or missing to restore assembly.
More
$7.21
- Compare At:
-
$7.72
- You Save:
-
$0.51
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 714-0101
Replacement fastener for lawn mowers and outdoor power equipment. Secures components and panels. Order a new one if yours is stripped, missing, or damaged.
More
$5.41
- Compare At:
-
$6.44
- You Save:
-
$1.03
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 726-0135
$8.57
- Compare At:
-
$9.50
- You Save:
-
$0.93
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 731-08133
Seals the fuel tank where the filter and neck meet on gas-powered equipment. Replace if worn, cracked, or missing to prevent fuel leaks and maintain seal.
More
$8.28
- Compare At:
-
$9.11
- You Save:
-
$0.83
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 732-0194
$5.39
- Compare At:
-
$6.41
- You Save:
-
$1.02
Out Of Stock
Usually ships within 4 - 14 days
Genuine Mtd part
By: Mtd
Part Number: 738-0296
$4.64
- Compare At:
-
$4.80
- You Save:
-
$0.16
Out Of Stock
Usually ships within 4 - 14 days