Parts for Ge PP932BM2BB: 01 - Control Panel & Cooktop Parts

Burner won't heat or stays on constantly? The infinite control switch regulates burner temperature. Simple DIY fix with basic tools in under 30 minutes.

Fix a burner stuck on high heat or with no temperature control by replacing the infinite switch. Straightforward DIY repair—remove cooktop screws.

Fix burners that won't adjust heat or trip the breaker with this cooktop infinite switch. Moderate DIY repair in 30-45 minutes. Fits electric ranges.

This part is a replacement control knob. This is knob is manufactured by General Electric and is a genuine OEM part that has been sourced directly from the manufacturer. This part is intended to replace a defective or misplaced knob on certain makes of ranges, stoves, and ovens. A misplaced control knob or one that is not functioning correctly can prevent accurate temperature control or stop the appliance from turning on or off. This knob features a double flat shaft and requires no tools for replacement. Please follow appropriate safety precautions and always ensure the stove is disconnected from both gas and power hookups before starting the replacement process. For more accurate information on how and where to install this replacement knob, it is recommended that the appropriate manufacturer diagrams or owner's manual are referenced. As an authentic replacement part, this knob can be used on multiple different models of ranges, stoves, and ovens manufactured by General Electric and Hotpoint. Please note that this replacement knob is a genuine part made of high-quality, durable materials and is sold individually.

Replace cracked, broken, or worn control knobs on your cooktop. This dial installs on the front panel to adjust heating element temperature settings.

Control knob for range burners. Mounts on the control panel to adjust heat settings. Replace if cracked, melted, broken, or missing original knob.

Replace your range indicator light when it fails to illuminate. Shows when burners or oven functions are active for safety. Verify fit with your model number.

If your cooktop makes a buzzing noise or won't turn on, this buzzer may need replacement. Compatible with select GE radiant and halogen cooktops.

Covers the control panel lamp opening to diffuse light and protect from debris. Replace if broken, cracked, or missing to restore clear indicator visibility.

Replace your cooktop's selector knob if cracked, broken, or missing. This glossy black control knob installs on the control panel to operate settings.

Control knob for selecting cooktop settings and temperatures. Installs on the control panel. Replace if cracked, broken, or worn from regular use.

Replacement glass top assembly for your cooktop. Installs as the main cooking surface. Needed when original glass is cracked, chipped, or broken.

Secures your cooktop to the cabinet or countertop. Replace if bent, broken, or missing to prevent movement and restore a stable, factory-secure fit.

Burner not heating? This 5.5" radiant element fits beneath glass cooktops. Common fix for non-working burners. Moderate DIY, 20-30 minutes to replace.

Fixes cooktop burner that won't heat or heats unevenly. This radiant element sits under smooth glass and restores direct heat to cookware on electric ranges.

Burner won't heat or only inner ring works? This dual radiant element restores both heating zones on your cooktop. Moderate DIY with basic tools.

Secures radiant heating element in place on your cooktop. Replace if spring is broken, worn, or missing to restore proper element alignment and stability.

Mounting bracket that secures the radiant element to your cooktop. Replace if bracket is bent, broken, or missing to properly support the heating element.

This bracket element support holds and stabilizes the oven's bake/heat element so it stays properly positioned for reliable heating and safe operation. Durable replacement for a sagging or loose element mounting point. What it does:

• Secures the oven heating element to prevent sagging or contact with the oven cavity
• Helps maintain consistent element placement for even heating
• Reduces stress on the element that can cause buzzing, arcing, or premature failure
• Restores proper element alignment after impact or wear

• One bracket element support

• Disconnect power to the appliance before inspecting or replacing the part
• Handle the heating element and mounting area carefully—sharp edges may be present
• Follow the appliance service manual for step-by-step removal and reassembly

Replacement mounting stud for cooktops and ranges. Secures the cooktop assembly to the cabinet or countertop. Replace if broken, stripped, or missing.

This bracket secures the oven/range hot surface indicator light so the indicator stays properly positioned and visible. It restores the light's mounting after breakage or wear, helping you know when a surface or element is hot. What it does:

• Holds the hot surface/indicator light in the correct position behind the console or cooktop lens
• Keeps the indicator light aligned and stable so the hot-surface warning is visible
• Replaces a cracked, bent, or missing bracket that causes a loose or non-seated indicator
• Helps prevent the indicator from rubbing against other components

• One replacement hot light bracket

• Disconnect power to the appliance before starting any repair
• Remove control panel or bezel per your model's service instructions to access the bracket
• Support and align the indicator lamp while fastening the bracket to avoid damaging the bulb or lens

Clear protective tape secures glass panels and components on your cooktop. Replace when tape loses adhesion or during glass panel repairs. Confirm fit.

Foam seal tape creates an airtight barrier between your cooktop and countertop, preventing spills from dripping into cabinets. Replace when worn or gaps appear.

Replacement rivet for cooktop assembly. Secures components and panels in place. Order when original rivet is damaged, stripped, or missing during repairs.

Mounting plate that secures and supports the wiring harness in your cooktop. Replace if cracked, broken, or missing to properly secure electrical connections.

Conduit wire assembly protects electrical wiring in your cooktop. Replace if the conduit is cracked, damaged, or missing to restore proper wire protection.

Replacement black screw for securing range panels, trim, or brackets. Needed when original screw is missing, stripped, or broken. Discrete fastener restores fit.

Hex head mounting screw for ranges and ovens. Secures elements, panels, and internal components. Replace if stripped, missing, or damaged during repairs.

Factory screw secures brackets, panels, trim, or burner components on ranges, cooktops, and wall ovens. Replaces missing, stripped, or corroded fasteners.

Replacement screw for securing panels, brackets, and internal components in ranges, ovens, and cooktops. Replace missing, stripped, or damaged screws.

Replacement mounting screw secures panels, brackets, and controls on ranges and ovens. Needed when original screws are missing, stripped, or damaged.

Black hex washer screw for securing range components like door trim, control panels, and internal brackets. Replace missing or stripped screws during repairs.

Flat washer installs between fasteners and appliance surfaces to distribute load and prevent damage. Replace if washer is missing, cracked, or worn.

Range ground washer ensures proper electrical grounding. Prevents shock hazards and ensures safe operation. Quick 5-minute repair for most models.

Retainer wire secures internal cooktop components. Replaces worn, broken, or missing wire that no longer holds parts in proper position.

Specially formulated cleaner for ceramic glass and smooth cooktops. Removes cooked-on food, grease, and spills without scratching. Verify fit by model.