Parts for Ge GTW180SSJ0WW: Controls & Backsplash Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Hex washer head screw for dryers and washers. Replaces damaged, stripped, or missing screws that secure panels, brackets, or components.

Replacement end cap for washer left-side assembly. Secures cabinet alignment and protects internal components. Needed when original is cracked or missing.

Right-side cabinet end cap for washers. Replaces cracked, broken, or missing trim piece. Restores proper fit and protects internal components.

The Compression Ring is an OEM part for GE washing machines. This ring is essential for securing the tub within the washing machine, ensuring it remains in place during the wash and spin cycles. It helps maintain the stability and proper function of the washing machine.

You should replace the compression ring if it becomes worn, cracked, or damaged. Causes of a bad compression ring can include frequent use, high-stress loads during wash cycles, or physical damage, which can lead to instability and poor washing performance.

Symptoms of a bad compression ring include:

• Excessive shaking or movement of the washing machine during cycles
• Unusual noises during operation
• The washing machine tub appearing misaligned or loose
• Ineffective washing due to instability

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Timer dial knob for washers. Installs on control panel to select wash cycles. Replace if knob spins freely, teeth are worn, or it won't engage cycles.

Replaces a worn, cracked, or broken control knob on your washer's control panel. Restores secure attachment to the control shaft for cycle selection.

Secures the timer knob to the shaft for accurate cycle selection. Replace if worn, broken, or lost causing knob to spin freely. Confirm fit with model.

Fix washer overfilling or not filling issues with a new pressure switch. This part senses water level and signals the control to advance the cycle properly.

Fix a washer with unresponsive buttons or a cracked control panel. This white control panel replaces damaged assemblies. Moderate DIY repair.

This knob and clip assembly secures a range or cooktop control knob to the control shaft so the knob turns the valve or switch reliably. It restores firm, responsive control and prevents the knob from slipping. What it does:

• Secures the control knob to the shaft so knob rotation moves the underlying valve or switch
• Prevents the knob from wobbling, spinning freely, or falling off during use
• Re-establishes positive engagement for accurate temperature or burner selection
• Compatible with common plastic control knobs that use a clip-style retention

• One knob and clip assembly as shown

• Disconnect power to the appliance before starting electrical work; for gas appliances, shut off the gas supply per the appliance manuals
• Remove the existing knob (pull straight off) and replace the clip and knob; use gentle pressure to avoid breaking plastic parts
• If the knob is tight after installation, ensure the clip is fully seated on the shaft and aligned with the knob hub

Washer timer shield protects internal timer components from moisture and debris. Simple DIY fix restores proper cycle timing and control operation.

The Knob Clip is an OEM part for GE washing machines and dryers. This small but crucial component is designed to secure the control knob to the appliance's control panel.  

Over time, knob clips can wear out or break due to frequent use or accidental damage. When this happens, the control knob may become loose, fall off easily, or fail to engage the control panel properly, making it difficult to set the appliance to the desired cycle or function.

Symptoms of a bad Knob Clip include:

• The control knob is loose or falls off the panel easily.
• Difficulty in adjusting settings due to a loose knob.
• The knob does not stay in place or slips when turned.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Size: 8-18 b.

Fix a washer that won't fill with hot or cold water. This rotary temperature switch controls water temperature settings. Easy 5-minute DIY repair.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Washer won't advance through cycles or stops mid-wash? This timer control assembly manages fill, agitate, rinse, and spin sequences. 15-30 minute repair.

Stainless steel hex washer head screw for securing appliance panels, brackets, and trim. Replace missing, stripped, or corroded fasteners during repair.

Plastic housing that secures the drain solenoid to the pump assembly. Replace if cracked, broken, or missing to properly position the solenoid mechanism.

Harness to corset & shifter

External logo emblem badge that restores your washer's factory appearance. Replaces missing, faded, or damaged emblems to keep the cabinet looking finished.

10-18 hex washer screw for securing panels, trim, brackets, and components in appliances. Replaces lost, stripped, or corroded fasteners.

Secures washer hoses at pump, tub, and valve connections to prevent leaks and hose blow-offs. Replace worn or missing clamps for a tight seal. Confirm fit.

Guides water from the inlet valve into the wash tub. Replace if cracked, broken, leaking, or causing uneven water distribution in your top-load washer.

The Triple Water Valve is an OEM part for GE washing machines. This part controls the flow of water into the washer, allowing for the precise mixing of hot, cold, and warm water necessary for different wash cycles.  

Causes of a bad triple water valve can include mineral buildup or blockages from debris, electrical issues such as faulty solenoids, and wear and tear from frequent use.  

Symptoms of a bad triple water valve include:

• The washer not filling with water or filling very slowly
• Incorrect water temperature during wash cycles
• Leaks from the valve area
• The washer not advancing through cycles properly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Connects the pressure switch to the tub in top-load washers. Replace if cracked, punctured, or brittle to restore proper water level monitoring.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.