Craftsman Lawn Mower Parts

Vibration-dampening spring assembly that installs between the engine and handle. Replace if springs are broken, worn, or missing to restore proper isolation.

Piston ring seals the gap between piston and cylinder wall in small engine equipment. Replace if worn, cracked, or causing compression loss.

This lever control is a genuine Husqvarna part, sold individually. This lever control can be used as a replacement part for a lawnmower. The lever control regulates the throttle of the lawnmower so that the engine remains activated when the lever is engaged, and the engine is shut off when the lever is disengaged.If the engine is not responding to the lever control in any of its settings, it is likely that the lever control has suffered damage and should be replaced. If the lever control, upon a visual inspection, seems to be punctured, torn, scraped, eroded, or damaged in some other way as a result of general wear and tear over long-term usage or from a direct impact with a hard object, the lever control should be removed and replaced with this genuine OEM replacement part before using the lawnmower again. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This lever control is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

Fix fuel leaks or engine flooding on your riding mower with this fuel check valve. Controls fuel flow between tank and carburetor. Easy DIY repair.

This is a four-in-one blade that is used for push mowers from several manufacturers. It is used for shredding and mulching leaves. This provides users with more options when cutting the grass on their lawns. If the blade is not working properly, it will limit the functionality of the mower.The metal blade on a mower is durable and meant to last. However, accidents such as running over stumps or rocks could cause the blade to bend or break. Older blades could become worn down and chipped. In some cases, the metal may even begin to corrode. Regardless of what causes the damage, owners need to change the blade out when it no longer works correctly. When replacing the part, users should wear work gloves to protect their hands. This blade works for certain models of push mowers from Husqvarna and Jonsered. It is sold individually and is a genuine OEM replacement blade sourced from the manufacturer.

Replacement cutting blade for riding mowers and lawn tractors. Installs under the deck to cut grass. Replace if blade is bent, cracked, or worn.

Note: This is ONE blade.

Front suspension steering link assembly for riding mowers and lawn tractors. Replaces worn, damaged, or broken steering linkage components.

This replacement blade adapter is an authentic OEM part for a riding lawn mower. The blade adapter is located in the lower deck of a lawn mower and connects the blade to the motor shaft. As the shaft rotates, it spins the adapter, causing the blade to rotate and cut grass. The adapter locks into place so that it doesn't come flying off during operation. The adapter is made of durable steel so that it is not easily damaged, but if the blade strikes something quite hard, it can break the adapter, causing the blade to spin unevenly, or even bending the motor shaft. If left unattended to, it can be dangerous for the operator, as the blade could potentially break off from the mower. Replacing the adapter can be a little finicky, as they are generally quite tightly locked into place. There are special adapter keys that make it easier to remove, but the same effect can be achieved with a screwdriver or a pair of pliers. This part is compatible with riding lawn mowers made by Husqvarna and Craftsman. It comes sourced from the original manufacturer and ships individually.

Muffler exhaust tube for riding mower tractors. Replaces cracked, rusted, or damaged exhaust tubing that needs replacement due to wear or corrosion.

Drive control cable for walk-behind lawn mowers. Connects handle controls to transmission drive system. Replace if cable is frayed, stretched, or broken.

Mower blades won't engage or disengage? This PTO switch controls blade engagement from your console. Direct replacement restores safe cutting control.

Protective gear cap for riding mowers and lawn tractors. Shields internal gears from debris and damage. Replace if cracked, broken, or missing.

This part is a replacement engine exhaust tube. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. If the current exhaust tube is broken or in any way damaged, this part can be used as a replacement. It is intended for use with several lawn tractor models.The exhaust tube connects to the muffler and the engine exhaust port and allows fumes to be properly expelled from the engine. The exhaust tube can become dented, damaged, or detached and thus may require replacement. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this exhaust tube, the appropriate owner's manual and equipment diagrams should be referred to. This exhaust tube is suitable for use on a variety of different lawn tractor models manufactured by Husqvarna and Poulan. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually

This lawn tractor fan has 10 blades and is made from high-quality materials. The fan is used in the transmission assembly to cool the engine, ensuring that the tractor doesn't overheat. If it is not working properly, it could mean heating and performance problems for the tractor.Fans do a substantial amount of work in the tractor, and over time, they can start to wear down. One or more of the blades might crack or break, for example. Owners need to replace the fan as soon as they notice any issues. If the engine of the tractor were to become too hot, it could be damaged. The replacement will require a wrench.This replacement fan for lawn tractors will work on models from Craftsman and Husqvarna. The fan is sold individually. It is a genuine OEM replacement part that is sourced right from the manufacturer.

Fix engine overheating on your riding mower with this fan blade and pulley assembly. Circulates cooling air around the engine block. DIY install.