Crosley Cooktop Parts

It's was easy to replace. Unplugged the oven from the wall, unscrew the two screws that hold the element to the back of the oven and pulled it away from the oven. Then just pull off the two wires at the end of the bake element. Install the new one in the revers order, easy. Read more

Replaced the Infinite Switch and that solved the problem. Did not need to replace the Surface Element Read more

Everything works great, but my Jenn-Air stove is more than 15 years old and really needed a face lift. To replace it will cost about $3000.00 to replace, to replace missing and old parts around $500.00. Thankfully Appliance Parts Pros had all the parts I needed to make my stove look as good as it works. Read more

So initial thought was bad bake igniter. I'bve replaced this before so I replaced it again and it wouldn't glow. Checked broil igniter and same thing, no glow. Checked voltage at molex connector for bake igniter and it went from 6.6v to 3.4v when triggered to glow -- well below the 120v expected. Ordered new clock/controller and overlay -- it shipped the next business day! Removed a handful of screws from the back panel to expose the clock/controller and removed/ replaced it with new... Read more

Removed & replaced igniter switch assembly. The hardest part was figuring out how to remove the range top...look up a YouTube video with your manufacturer and model number to see how to do it. Read more

• Element will not heat

Not really a repair, just needed to update some parts that were worn out. Drip pans were perfect and I am so glad to have found them on this location. Read more

We ordered a new ignitor and it came in two days just as promised. The only problem that we experienced was that the leads on the new ignitor were to short. We were able to find enough slack on the oven end to make it work. The oven is once again working great. The video was a little off on what need to be done to disconnect the ignitor. We actually had to flip the oven over to get to the bottom. We could not access the connector through the back. Read more

I REPLACED THE HINGE ASSY ONLY BECAUSE I WAS UNABLE TO PURCHASE THE SPRING ONLY. THIS IS 3rd TIME I REPLACED THE HINGES BECAUSE OF A BROKEN SPRING. IT WOULD BE CHEAPER IF ONLY THE SPRING COULD BE BOUGHT. Read more

Ordered glass and trim kit and replaced them myself. Read more

Found the parts I needed ordered them from your site Received them and installed in a few minuets and was done Read more

Found web site. Called the 800 number. Placed the order. 2 days later, they were at my door. Read more

It is an easy job if you are good with screw driver and some general sense of things. Unplug the oven and than I opened the oven door and unscrewed two screws from bottom lift the glass door up and unscrewed the element coils total 4 screws there in total and pull the whole glass top out, removed the bracket from old glass top another 2 screws and 2 small brackets(snap on) from behind the glass top and put them on new one. slide the new glass top with back brackets into slot lift it up again to... Read more

Easy fix, 2 screws and done. Part was a perfect match! Read more

• Won't start

Replaced pilot and thermocouple. ..pilot flame was weak ...wasn't heating thermocouple enough to power the valve Read more

Bought replacement burner receptacles. Cut off the old ones, used wire nuts to connect replacements. Read more

It's one of the easiest jobs in the world. It take longer to unwrap the parts than to install them. Looks great...works great. Easy, Done. Read more