Parts for Whirlpool WFE525C0BS0: 06 - Door Parts

White vent trim panel that covers the ventilation opening on your range. Replace if cracked, chipped, broken, or missing to restore clean appearance.

This is a black plastic vent trim piece that covers the oven door vent opening, typically located at the top or bottom of the oven door. It directs hot air away from the oven cavity while providing a finished appearance. Replace this trim if it is cracked, warped, discolored, or missing, which can allow excess heat to escape unevenly or affect the look of your range.

The Screw is an OEM part for Whirlpool appliances, commonly utilized in a variety of their products such as washing machines, dryers, refrigerators, and dishwashers. This screw is essential for securing different components, ensuring they are properly attached and aligned to maintain the appliance’s functionality and safety.

Over time, screws can become loose, stripped, or lost due to vibrations, regular use, or during maintenance and repairs. A damaged or missing screw can lead to unstable parts, which may affect the performance and safety of the appliance.

Symptoms of a bad or missing screw include:

• Loose or rattling components
• Misalignment of parts
• Noise during operation
• Panels or parts not staying securely in place

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

White range door handle for electric and gas ranges. Replaces broken, cracked, or missing door handles. Direct fit for oven door exterior mounting.

Replacement door handle for electric and gas ranges. Installs on the oven door exterior. Order this part if your existing handle is cracked, broken, or missing.

Black range door handle for safe and comfortable opening. Replaces cracked, broken, or worn handles from normal use or accidental damage. Model-specific fit.

Replaces the left inner door liner on your range. Install when the original liner is cracked, stained, or damaged to restore a clean door interior surface.

Secures range door panels and internal components to the cabinet frame. Replace if bracket is cracked, broken, or bent to restore proper door alignment.

Clear glass panel that installs inside your range oven door. Replace if cracked, shattered, or broken. Provides interior visibility and insulation.

Metal frame that surrounds and secures the window glass in your range oven door. Replace if bent, corroded, or damaged to restore proper glass alignment.

Replace worn range oven door insulation to maintain heat efficiency and protect outer door surfaces. Up to 4 pieces may be needed. Verify fit with model.

Side trim retainer for range oven doors. Secures trim to door frame. Replace if broken during door glass cleaning or cracked from age and wear.

Replacement passive door hinge for electric and gas ranges. Serves as the pivot point for your oven door. Replace if bent, broken, or worn from use.

Replacement door hinge for electric and gas ranges. Supports door weight and ensures proper alignment. Needed when spring breaks or hinge arm cracks.

White outer glass panel for range oven door. Replaces shattered, cracked, or broken exterior door glass. Installs on front of door with screws.

Replacement outer glass panel for range oven doors. Installs on the front exterior of the door. Order if your glass is cracked, shattered, or broken.

White right-hand side trim for range oven doors. Covers gaps and protects internal components. Replacement needed when cracked, broken, or missing.

Decorative trim piece for range oven door side edge. Replace if cracked, broken, or missing after disassembly. Left-hand white trim installs along door.

Broken or bent oven door trim during glass cleaning? This left side trim restores the finished look of your range door. Easy DIY fix with a screwdriver.

Replace cracked, broken, or missing oven door trim on your range. Covers the outer edge of the door for a clean finished look and protection from wear.

The Range Screw is an OEM part for Whirlpool ranges. It is a small but essential component used to secure various parts and panels of the range. It is designed to fit securely into pre-drilled holes, holding components tightly in place.

There are a few factors that can lead to a bad Range Screw. Over time, screws may become loose or stripped due to frequent use or inadequate tightening. Accidental cross-threading or overtightening can also damage the screw or the surrounding components.

Symptoms of a bad screw may include loose or wobbly parts, rattling noises during operation, or difficulty in keeping components securely attached. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Replaces the metal trim strip along the bottom edge of your range oven door. Order when original trim is rusted, corroded, broken, bent, or missing.

The Screw is an OEM part for Whirlpool ranges. This screw is used to secure various components within the range, ensuring that parts such as panels, control boards, or burners are firmly attached and remain stable during operation.  

Causes of a bad range screw can include regular wear and tear, over-tightening, or exposure to high heat.  

Symptoms of a bad range screw include:

• Loose or unstable components within the range
• Difficulty in securing parts during maintenance or repair
• Visible damage or wear on the screw
• Parts becoming misaligned or rattling during operation

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Size: 8-18 x 1/2 inch.

Replacement outer glass panel assembly for range oven doors. Installs on the front exterior of the door. Needed when original glass is cracked or shattered.

Positions and secures your range door handle, maintaining proper spacing from the door surface. Replace if cracked, broken, or missing to restore fit.

This spacer maintains the designed clearance between parts in your appliance, keeping components aligned for smooth, quiet operation. Replacing a worn or missing spacer helps prevent rubbing, binding, and premature wear in the affected assembly.

• Maintains the correct gap and alignment within the assembly
• Reduces friction, noise, and wear between adjacent parts
• Helps components seat and move smoothly as designed
• Typical symptoms include scraping noises, looseness or wobble, misalignment, or visible spacer damage

• Disconnect power (and water supply, if applicable) before servicing
• Refer to your model's parts diagram to determine the spacer's location, orientation, and stack order
• Reuse existing hardware (washers, clips, screws) as required by your model
• Tighten fasteners snugly without deforming the spacer; verify smooth movement before full reassembly

Secures and finishes the end of your range oven door handle. Replace if cracked, broken, or missing to keep the handle firmly attached to the door.