Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Parts for Ge GUD27ESPM0DG: Drum Parts

Parts for Ge GUD27ESPM0DG: Drum Parts

Location on Diagram
Part Description
Price & Availability
502
Product photo
5.0 (2)
By: Ge
Part Number: WE2M174

This replacement screw secures appliance panels and internal components per your model's hardware list. Replace lost or stripped screws to keep assemblies tight, reduce vibration and rattles, and maintain proper alignment.

  • Fastens brackets, covers, and sheet-metal panels as specified in the parts diagram
  • Restores proper fit when an original screw is missing, stripped, or damaged
  • Helps eliminate rattling or vibration from loose hardware
  • Keeps components safely in place during operation
What's included: 1 screw Install notes:
  • Disconnect power to the appliance before servicing
  • Match length, head style, and thread to the original; install in the same location/quantity
  • Start threads by hand to avoid cross-threading; tighten with the correct driver
  • Do not overtighten, especially into plastic or thin sheet metal

More
$12.38

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
505
Best Seller
Product photo
4.9 (37)
By: Ge
Part Number: WE4M181

Fix a dryer that won't heat, overheats, or shuts off mid-cycle. This cycling thermostat regulates drum temperature. Easy DIY repair with video guide.

More
$60.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
506
Best Seller
Product photo
4.8 (27)
By: Ge
Part Number: WE4M137

Dryer shuts off too soon or won't heat? A faulty high limit thermostat often causes premature shutoff. Simple DIY fix—usually takes 15 minutes or less.

More
$73.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
507
Best Seller
Product photo
By: Ge
Part Number: WE4M528

Dryer not heating or shutting off mid-cycle? A faulty safety thermostat can cut heat when temperatures climb too high. Direct heater duct mount part.

More
$34.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
511
Best Seller
Product photo
5.0 (20)
By: Ge
Part Number: WE3M33

Supports and stabilizes the dryer drum for smooth rotation. Replace if shaft is worn, bearing is damaged, or drum wobbles or sinks at the rear.

More
$41.60

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
526
5.0 (1)
By: Ge
Part Number: WE21X28957

This replacement drum assembly is the rotating cylinder that tumbles laundry in your dryer. Replacing a damaged or out-of-round drum restores smooth, quiet tumbling and helps protect fabrics from snags, scraping, and uneven drying.

  • Forms the rotating chamber that holds clothes; driven by the belt and motor to tumble items for drying
  • Works with drum seals and lifters/baffles to maintain airflow and separate fabrics for even drying
  • Replacing a dented, cracked, or out-of-round drum can resolve thumping, scraping, or rumbling noises
  • Addresses sharp seams, loose spots, or rust that can snag/tear clothing or leave marks
What's included: 1 drum assembly Install notes:
  • Disconnect power; shut off gas supply for gas models before service
  • Remove top/front panels and release belt tension to lift out the old drum; note belt routing
  • Compare parts and move over any reusable, model-specific components if required
  • Inspect belt, idler pulley, bearings, and felt seals while open; replace if worn

More
$362.32

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
528
By: Ge
Part Number: WE21M39

The Baffle is an OEM part for GE electric dryers. Located inside the dryer drum, it helps separate clothes and improves air circulation during tumbling cycles. 

To achieve consistent drying times, a dryer relies on balanced airflow penetrating all areas where clothes reside. The baffle creates divisions to ensure air fully surrounds each layer instead of bypassing some areas. Its raised ridges also help tumbling action by preventing clumps of clothes.

Symptoms of a bad baffle include:

  • Slow, uneven drying requiring extra cycles  
  • Certain areas of clothes remain damp while others over-dry
  • Reduced airflow output from the vent due to blockage

Replacing it with the genuine GE baffle plate restores optimized air distribution within the drum. The part is also compatible with some Kenmore dryers that use GE elements.

More
$17.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
534
Product photo
5.0 (2)
By: Ge
Part Number: WE2M163

This is a small screw, and it is made for dryers, washers, and washer dryer combos. This is a genuine replacement part made by General Electric. Screws are common in these appliances and can cause many difficulties if they become loose, damaged, or missing.A new screw might be needed if there are areas in the appliance that seem off balance or not level. Another way to tell if a new screw is needed is if there are parts in the appliance that are loose or falling off. This is common over many years of normal use as the shaking of washers and dryers can eventually lead to loose screws. Be sure the washer or dryer is completely off before attempting to replace any screws.This is an OEM part sourced directly from the manufacturer. It is sold individually and is compatible with washers, dryers, and washer dryer combos made by General Electric.

More
$11.10

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
600
Best Seller
Product photo
5.0 (1)
By: Ge
Part Number: WE11M62

Dryer not heating or taking too long to dry? This heating element and housing assembly restores proper heat generation and airflow for even drying.

More
$245.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
3106
Best Seller
Product photo
4.8 (112)
By: Ge
Part Number: WE1M462

Supports the rear dryer drum for smooth, quiet rotation. Replace if you hear squeaking, screeching, or thumping during cycles. Verify fit with your model.

More
$27.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
3127
Best Seller
Product photo
4.9 (55)
By: Ge
Part Number: WE1M461

The O Ring is an OEM part for GE dryers, creating a tight seal in different components for efficient operation. This small part prevents air leaks that can impact drying performance, made from quality materials to withstand high temperatures and frequent use

Causes of a faulty O Ring in a dryer may stem from heat exposure, regular wear and tear, or chemical damage. This can result in reduced elasticity, cracks, or breaks, impacting the seal.

Symptoms of a bad O Ring in your dryer include:

  • Reduced efficiency in drying, as air leaks can affect the dryer's ability to maintain the correct temperature.
  • Unusual noises stemming from air escaping through the compromised seal.
  • Potential for small leaks or condensation within the dryer's internal components, leading to moisture issues.

This genuine GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

More
$12.46

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
3443
Product photo
By: Ge
Part Number: WH2X1217

Size: 8 - 18 ab.

More
$9.88

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google