Parts for Ge GUD27ESPM0DG: Tub & Basket Assembly Parts

This tub kit replaces worn or damaged hub components and the agitator to restore proper washer operation and reduce noise or wobble. Designed to fit compatible GE top-load washing machines, it helps secure the agitator to the tub assembly. What it does:

• Replaces the hub nut that secures the agitator to the transmission/tub shaft
• Provides washers that ensure a tight, vibration-resistant seal and alignment
• Includes a replacement agitator to restore proper clothes movement and cleaning action
• Addresses symptoms like excessive noise, shaking, or a loose/rocking agitator during cycles

• Disconnect power and water supply before beginning any repair
• Follow OEM instructions for torque and part orientation; use proper tools to avoid damage
• Inspect surrounding parts (agitator dogs, drive shaft, seal) and replace if worn

The Kit Basket includes Hub Nuts and the Agitator is an OEM part for GE washers. It provides critical components for agitating clothes and dispersing them evenly during cleaning cycles. The hub nuts attach the agitator securely to the transmission shaft so it can spin vigorously, while the agitator's fins rotate clothes continuously to ensure thorough cleaning. 

Symptoms of bad basket kit include:

• Excessive vibration or noise from the agitator area
• The agitator wobbling or not spinning smoothly   
• Hub nuts cracking, loosening, or falling off over time
• Inefficient cleaning as clothes remain tangled instead of agitating

Causes can be normal wear and tear, loosened hub nuts from heavy loads, or cracks in agitator fins. Replace yours today with genuine GE components and restore optimized agitation for deep-down dirt removal. This OEM GE replacement is also compatible with Hotpoint, RCA, and some Kenmore models.

The Agitator Kit is an OEM part for GE washing machines. It contains the agitator shaft and center bolt. These agitator components play an important role in the washing process, generating powerful motion to loosen and remove stain-causing residues from clothing loads.

Causes of a faulty agitator include excessive wear and tear over repeated usage, accidental damage from overloading or foreign objects, or corrosion from mineral buildup.

Symptoms of agitator issues consist of:

• Vibration or shaking during spin cycles
• Improper washing action and ineffective cleaning
• Difficulty loading/unloading due to agitator binding
• Visible cracks or breaks in agitator parts

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

This agitator screw secures the washer's agitator to the drive hub/shaft. Replace a missing, stripped, or rusted screw to restore a tight, stable agitator and proper wash action while helping prevent wobble and rattling during cycles.

• Fastens the agitator to the drive hub/shaft
• Keeps the agitator from lifting or wobbling
• Helps maintain consistent agitation and wash performance
• Typical symptoms: loose or wobbly agitator, rattling/clicking during agitation, reduced cleaning results

• Disconnect power before servicing the washer
• Remove the agitator cap or fabric softener dispenser to access the screw
• Use an appropriate driver or socket; avoid cross-threading and overtightening
• Ensure the agitator is fully seated before tightening; reinstall the cap/dispenser

This fabric softener dispenser cap funnel sits in the dispenser cup and channels softener into the tub during the rinse cycle. Replacing a cracked, warped, or missing cap helps restore proper dispensing and reduce messy leaks or splashing.

• Directs fabric softener from the dispenser into the wash during the rinse cycle
• Helps prevent splashing and residue buildup around the dispenser
• Typical failure signs: softener not dispensing, softener left in the cup, leaks from dispenser area, loose or missing cap
• Visual damage (cracks, deformation) to the cap/funnel

• Unplug the washer before servicing
• Lift off and remove the old cap/funnel from the dispenser cup; some models require a gentle twist to release
• Clean the dispenser cup of residue before installing the new part
• Press the new cap/funnel firmly into place and run a rinse cycle to verify dispensing

This washer tub cover closes and seals the opening of the outer tub, helping contain water and suds during wash and spin for cleaner, more reliable operation. It also supports proper water flow back into the tub. What it does:

• Seals the outer tub opening to contain wash water and reduce splashing
• Helps channel recirculation/dispense water back into the tub
• Maintains proper clearance so the basket/drum doesn't rub the rim
• Typical failure signs: leaks or splashing at the opening, visible cracks/broken tabs, rubbing or scraping noises during spin

• 1 tub cover

• Disconnect power and turn off water before servicing
• Access the tub per your model's service procedure (remove top/front panel as applicable)
• Release clips/screws and detach any hoses/fittings from the old cover; transfer any reusable parts
• Seat the new cover evenly and fully engage all tabs/clamps; reassemble and run a short test to check for leaks

This cup funnel sits inside the fabric softener dispenser and channels softener into the wash basket during the rinse. Replacing a damaged or missing funnel helps stop leaks and ensures the softener empties as designed.

• Directs fabric softener from the dispenser cup into the washer tub during the rinse cycle
• Helps prevent spills and residue around the dispenser area
• Restores proper flow through the softener cup for consistent dispensing
• Common signs of failure: softener remains in the cup, slow or no dispensing, overflow/leaks, or a cracked/missing funnel

• Disconnect power and turn off water supply before servicing
• Remove the fabric softener dispenser cap/cup per your model's instructions
• Lift out the old funnel; clean the seat, then fully press the new funnel into place, aligning any tabs
• Reinstall the dispenser components and run a rinse cycle to flow

A small retaining nut that secures a dryer pulley in place to keep the idler or drum pulley mounted and stable. Replacing a worn or missing nut restores proper pulley alignment and helps the dryer run quietly and reliably. What it does:

• Secures the pulley to its shaft so the belt tracks correctly
• Prevents pulley wobble that can cause rubbing, squeaks or belt mis-tracking
• Helps stop excessive vibration during tumbling
• Supports normal drum rotation for even drying

• Disconnect power before servicing to avoid electrical shock
• Requires basic hand tools (socket or nut driver) and access to the dryer cabinet
• Hold the pulley/shaft steady while tightening; do not overtighten to avoid stripping threads
• Replace those parts as well for reliable operation

The Hardware Kit is an OEM part for GE laundry centers. It contains various mounting screws, brackets, and retainers needed to securely attach internal parts like panels and components.  

GE laundry centers consolidate washer and dryer functions into one large machine. As an appliance containing multiple moveable metal assemblies, it relies on hardware to maintain structure during vigorous laundry cycles. Vibrations can cause interior connectors to rattle loose without reinforcement.

Causes of insufficient hardware include stripped screws with reduced grip, broken supports no longer performing as designed, or lost clips leaving certain areas unstable.  

Symptoms of bad or missing hardware include:

• Loose, rattling, or detached internal components
• Exposed connections between washer and dryer functions
• Reduced integrity in particular sections of the unit

Replacing with the OEM GE kit restores the factory-installed reinforcement. Compatible with some Kenmore combo units containing GE mechanisms.

The Rod Assembly is an OEM replacement part for GE washing machines. Measuring 27 inches it is responsible for guiding the movement of the inner drum during the cycles while cushioning vibration and impact. The suspension rod assembly works together with other suspension components to absorb shock and minimize noise.

Symptoms of a bad suspension rod assembly include:

• Excessive shaking, vibrating, or rattling during operation
• Noisy operation
• Premature wear of other components

Causes of failure can be normal wear and tear over long-term use. Heavy loads, off-balance loading, or other machine misuse can exacerbate issues by placing undue stress on suspension elements.

This GE OEM part is also compatible with Hotpoint, RCA and select Kenmore models for easy replacement.

The Rod Assembly 27" is an OEM replacement part for GE washing machines. This assembly is designed to support the washer tub, helping to stabilize it during the wash and spin cycles. It plays a crucial role in maintaining the balance of the machine, thereby reducing vibrations and ensuring smooth operation.

Over time, rod assemblies can wear out or become damaged due to constant movement and heavy loads. Causes of a bad rod assembly include normal wear and tear, unbalanced loads that place excessive strain on the rods, or damage from mishandling.

Symptoms of a bad Rod Assembly include:

• Excessive vibrations during wash or spin cycles
• Loud banging or thumping noises
• The washing machine appearing unbalanced or shaking
• Inefficient washing due to tub instability

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The UPPER BALL JOINT is an OEM component specifically designed for GE washers. It is found on the center post of the tub and allows the outer tub to pivot front to back during agitation cycles. This precise movement helps optimize cleaning performance by maximizing water and pressure distribution.

Causes of a bad upper ball joint can include wear and tear over time, damage due to impact or misalignment, or unbalanced loads that put added stress on the joint. 

Symptoms of a bad upper ball joint include:

• Excessive noise or squeaking coming from the center post area
• Hampered or sluggish movement of the outer tub during washing  
• Leaks developing around the center post 

Replace yours today with this genuine OEM GE part for reliable front-to-back agitation and smooth cycle operation. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.