Estate Dishwasher Fuse Or Sensor

Best Seller

Genuine Whirlpool part

Estate High Limit Thermostat

4.9 (38)

By: Whirlpool

Part Number: WP661566

Thermostat has 1/4 inch terminals.

The High Limit Thermostat is an OEM part for Whirlpool dishwashers. This safety feature is designed to prevent the dishwasher from overheating by shutting off the power if the internal temperature exceeds a certain limit. It acts as a safeguard against potential hazards, such as fires, and ensures the dishwasher operates within safe temperature ranges.

Over time, the high limit thermostat can become defective due to normal wear or electrical issues within the dishwasher. A malfunctioning thermostat may not accurately respond to temperature changes, which can lead to overheating or the dishwasher not reaching the necessary temperature for optimal cleaning.

Symptoms of a bad High Limit Thermostat include:

Dishwasher not starting or completing a cycle
The dishwasher stops heating water, affecting cleaning performance
Overheating, which could potentially damage dishes or the dishwasher itself

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Not drying dishes properly

Do-It-Yourself Stories from Customers like You Whirlpool dishwasher not fully cleaning or drying dishes. Andrew M. • Seattle , WA • January 05, 2020

My Whirlpool dishwasher (wdf520padm3) started leaving food on dishes and not drying dishes as well as it used to, even when I ran the 'high temp' and 'heavy' cleaning options. This started happening after about 3 years of operation. To try to diagnose the issue, I started the diagnostics cycle (see below for instructions on how to do this). However, the 'Clean' LED is also not working on my dishwasher, so I was unable to read the error code after the service cycle finished. I decided to... Read more

$27.95

Compare At:: $32.98
You Save:: $5.03

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Estate Thermal Fuse

4.9 (234)

By: Whirlpool

Part Number: W10258275

The Thermal Fuse Kit is a genuine OEM Replacement part. This kit is designed to cut off power to the dishwasher if it overheats. The fuse ensures that your appliance operates safely and effectively. If your dishwasher is not starting, it may be due to a failed thermal fuse. Investigate what caused the dishwasher to overheat before replacing the thermal fuse.

This Kit Includes:

(1) Thermal Cutoff (TCO)
(1) Harness Assembly
(2) Zip Ties
Instructions

Specs:

Electrical specs: 86°C, 187°F fuse
Construction: metal/plastic
Fuse dimensions: 5/8""L x 5/8""W x 1-1/4""H
Harness and plug dimensions: 4-7/8""L
Zip tie dimensions: 6-3/4""L

Repair your dishwasher today with the Thermal Fuse Kit and ensure that your appliance operates safely and efficiently for years to come.

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You Thermal fuse and control panel for my maytag dishwasher both failed and needed to be replaced Richard C. • Cape Canaveral , FL • November 01, 2014

Ordered a new thermal fuse from your website last week and installed it three days ago. This is the second fuse in one year that needed to be replaced. The dishwasher was purchased new in 2012. Relatively easy to replace. Your website had a you tube video that showed how to replace it. Power came back on the control panel, but the start button (not a button, but a touch screen) would not work. This is the second time in two years that the control panel had to be replaced because the start... Read more

$30.95

Compare At:: $36.83
You Save:: $5.88

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Estate Turbidity Sensor

4.9 (31)

By: Whirlpool

Part Number: WPW10705575

The Turbidity Sensor is an OEM part for Whirlpool dishwashers. It detects the level of particles in the water during the wash cycle, allowing the dishwasher to adjust the cycle duration and water usage for optimal cleaning performance. This sensor ensures that dishes are thoroughly cleaned by monitoring water clarity.

You should replace the turbidity sensor if it becomes faulty or damaged. Causes of a bad turbidity sensor can include regular wear and tear, exposure to hard water minerals, or electrical malfunctions. A malfunctioning sensor can lead to inefficient cleaning cycles and poor wash results.

Symptoms of a bad turbidity sensor include:

Dishes not being cleaned properly
Dishwasher running longer than usual or shorter cycles
Error codes related to the sensor
Inconsistent wash performance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You F7 e1 error code water not getting hot. David F. • Austin , TX • September 14, 2021

My wife said we have a problem with our dishwasher (Whirlpool WDT920SADE2). The dishes were not getting clean, and the soap dispenser opened, but soap was still dribbled down the inside of the door and on the silverware caddy. I'm not the handiest guy; it took me several days to go through the trouble-shooting process, watching multiple videos and trying different things. My initial guess was that the soap dispenser was opening too late. (This turned out to be wrong.) I started off by... Read more

$31.37

Compare At:: $37.33
You Save:: $5.96

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Estate Dishwasher Fuse Kit

4.9 (106)

By: Whirlpool

Part Number: 8193762

The Dishwasher Fuse Kit is an OEM replacement part for Whirlpool dishwashers. It contains the necessary thermal fuses that protect the dishwasher's electrical system from overheating or short circuits. These fuses are critical safety components that help prevent potential fire hazards or damage to the appliance. When replacing this fuse, the included wire harness must be replaced as well.

Symptoms of a blown dishwasher fuse kit include:

The dishwasher not turning on or powering up at all
Error codes related to heating or electrical system issues
Intermittent power failures during wash cycles

Causes of a faulty fuse kit can include electrical surges, wiring problems, component malfunctions leading to overcurrent situations, or simply wear and tear over time.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You All the leds on the front panel were off and there was water sitting in the bottom of the dishwasher from the previous cycle it appears the power was off to the unit Ryan R. • Bedford , NH • October 24, 2015

I first verified the house panel circuit breaker was not tripped. It wasn't so I removed the bottom kick plate of the unit, using a circuit cricket I verified the power feed to the unit was live. The bottom kick plate had a trouble shooting guide in a plastic sleeve which I opened and reviewed. Based on information in there it appeared the TOC was likely the issue. (We recently lost power and used a stand by generator. Previously when we did the the dishwasher had a blinking LED on the... Read more

$48.95

Compare At:: $57.76
You Save:: $8.81

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Estate Thermal Fuse

4.9 (40)

By: Whirlpool

Part Number: 675813

The Thermal Fuse is an OEM part for Whirlpool dishwashers. It serves as a crucial safety component that prevents the appliance from overheating by cutting off electrical power if the temperature inside the dishwasher becomes too high. This helps protect both the dishwasher and your home from potential fire hazards.

Causes of a bad thermal fuse can include overheating due to blocked air vents, malfunctioning components that lead to excessive heat, or electrical surges that damage the fuse. Over time, regular wear and tear can also contribute to the fuse's failure.

Symptoms of a bad thermal fuse include:

The dishwasher not starting or running
The control panel not responding
The dishwasher stopping unexpectedly mid-cycle
No indicator lights or sounds when attempting to operate the dishwasher

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You Dishwasher just stopped working, no power Michelle W. • Gillett , WI • April 05, 2014

My friend researched online what would make a dishwasher just stop working, no power. The person on the you tube video showed how to first start with the thermal fuse. Then searched online for the thermal fuse. You had the part for a small price. I felt it was worth trying to see if that may be the issue. IT WORKED!! I was without a dishwasher for over a year, was planning to by a brand new one but for $23.00 now have a working dishwasher!! YEAH! Read more

$45.95

Compare At:: $54.22
You Save:: $8.27

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Estate Fuse Kit

4.8 (36)

By: Whirlpool

Part Number: W10402110

The Fuse Kit is an OEM part for Whirlpool dishwashers. This kit includes a thermal fuse and necessary installation components. The fuse is a safety device that protects the dishwasher from overheating by cutting off electrical power if the temperature gets too high.

You should replace the fuse if it becomes defective. Causes of a bad fuse can include electrical surges, overheating, or age-related wear and tear, all of which can compromise the fuse's ability to function properly.

Symptoms of a bad dishwasher fuse include:

Dishwasher not starting
Intermittent operation or sudden shutdowns during cycles
No power to the control panel
Error codes indicating a thermal issue

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You No power on the dishwasher Jim C. • Burnet , TX • July 17, 2014

Checked online with app and figured out the most common cause of the problem after checking the most obvious causes. Ordered the fuse received on the second day. Installation was very simple and the dishwasher was again functional. Read more

$32.95

Compare At:: $39.21
You Save:: $6.26

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Estate Thermal Fuse

4.8 (5)

By: Whirlpool

Part Number: WP3368928

This thermal fuse protects your appliance by opening the circuit if temperatures climb beyond a safe limit, helping prevent wiring or control damage. When it blows, the unit may lose all power or stop mid-cycle. What it does:

Cuts power when overheating is detected to protect internal components
Helps prevent damage from shorted heaters, motors, or wiring faults
Common symptoms: no power, won't start, shuts off during operation, no lights/display
A blown fuse reads open (no continuity) and must be replaced—it is not resettable

What's included:

1 thermal fuse

Install notes:

Disconnect power before servicing to avoid electrical shock
Access the fuse location per your model's service information; note wire orientation and mounting
Replace one-for-one; do not bypass or up-rate the fuse. Identify and correct the overheating cause before restoring power.

Do-It-Yourself Stories from Customers like You Heated dry wouldn't work Steven L. • Fenton , MI • June 13, 2014

I took a multimeter and found out that the old fuse was open. I ordered this new one and popped it in. Pretty easy fix and it's still going strong. Read more

$54.61

Compare At:: $57.76
You Save:: $3.15

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Estate Thermistor

By: Whirlpool

Part Number: 8578828

$98.95

Compare At:: $116.76
You Save:: $17.81

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Estate Thermister

5.0 (1)

By: Whirlpool

Part Number: WP8269208

Do-It-Yourself Stories from Customers like You Would not complete a cycle the clean light would flash seven times indicating a faulted heater circuit ohm check good on the element thermistor would not open a 75 to 80 deg Ralph B. • Watauga , TX • October 21, 2016

Unplug the old twist remove. Push the new one in twist,plug the wires in. Flop around on floor under sink to hook every thing up. Read more

Estate dishwasher Fuse or Sensor replacement parts are essential for maintaining the optimal performance of your dishwasher. Imagine coming home to a load of dishes ready to be cleaned, and your dishwasher's fuse or sensor is not up to the task. These small, yet vital components ensure your Estate dishwasher operates smoothly, providing you with spotless dishes every time.

Dishwashers save time and effort in modern kitchens. The fuse safeguards against electrical issues, while the sensor monitors water levels and temperatures, ensuring everything runs efficiently. Quality Estate dishwasher parts, like OEM replacement fuses and sensors, guarantee compatibility and longevity, keeping your appliance running at its best.

You can easily find high-quality Estate dishwasher replacement parts that will help keep your appliance functioning correctly. With reliable parts on hand, you'll have peace of mind knowing your dishwasher is always ready to tackle any load.

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Estate Dishwasher Fuse Or Sensor

Estate High Limit Thermostat

Estate Thermal Fuse

Estate Turbidity Sensor

Estate Dishwasher Fuse Kit

Estate Thermal Fuse

Estate Fuse Kit

Estate Thermal Fuse

Estate Thermistor

Estate Thermister

Common Problems