Estate Dishwasher Spray Arm & Related

The Spinner Kit is an OEM part for Whirlpool dishwashers. The spinners are responsible for spraying water to effectively clean and rinse dishes. Over time, spinners may wear out or break, impacting performance. If your dishwasher isn't cleaning properly, inspect the spinners first

Causes of a bad Spinner Kit can include mineral buildup from hard water, which may block the water jets, or physical damage to the spinner arms that can occur from loading large or improperly placed dishes.

Symptoms of a failing Spinner Kit include:

• Dishes remaining dirty or spotted after a wash cycle
• Water not spraying adequately throughout the dishwasher
• Unusual noise during the wash cycle as the damaged spinner struggles to rotate
• Decreased water pressure affecting overall appliance performance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Spray Arm Bearing is an OEM replacement part for Whirlpool dishwashers. This supports the rotation of the spray arm, ensuring it can freely move and distribute water evenly throughout the dishwasher during a wash cycle.

Causes of damage to the spray arm bearing can include mineral buildup from hard water, wear and tear from regular use, or damage from debris that has become lodged in the spray arm. 

Symptoms of a bad Spray Arm Bearing include:

• The spray arm not rotating properly or getting stuck, which can lead to dishes not being cleaned effectively.
• Unusual noises coming from the dishwasher, such as grinding or squeaking, indicating that the spray arm is struggling to rotate.
• Poor water distribution inside the dishwasher, resulting in spots or food residue on dishes after a cycle.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Nylon Radial Ring Bearing is an OEM part for Whirlpool dishwashers. It supports the spray arm, allowing it to rotate smoothly and evenly distribute water throughout the dishwasher for effective cleaning. This bearing reduces friction and wear, contributing to the longevity and efficiency of the spray arm mechanism.

You should replace this radial ring bearing if it shows signs of wear, damage, or if the spray arm is not rotating properly. Common causes of a bad bearing include wear and tear from regular use, accumulation of debris, or damage from improper installation or handling.

Symptoms of a bad nylon radial ring bearing include:

• Spray arm not spinning or rotating unevenly
• Noisy operation during the wash cycle
• Reduced cleaning performance
• Visible damage or wear to the bearing

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Ring Bearing is an OEM part for Whirlpool dishwashers. It is a critical component that supports the rotation of the dishwasher's spray arm, ensuring it can spin freely to distribute water evenly throughout the dishwasher for effective cleaning.

You should replace the ring bearing if it becomes worn out, cracked, or damaged. Causes of a bad ring bearing can include general wear and tear from regular use, accumulation of debris or mineral deposits, and damage from improperly loaded dishes.

Symptoms of a bad ring bearing include:

• The spray arm not rotating properly
• Ineffective cleaning performance
• Unusual noises such as grinding or squeaking during operation
• Loose or wobbly spray arm

This OEM part is also compatible with certain models of Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwashers.

The Spray Arm Nut is an OEM replacement part for Whirlpool dishwashers. This nut secures the spray arm to the dishwasher, ensuring it stays in place while distributing water to clean dishes effectively.

The spray arm nut can become worn out or damaged due to regular use, exposure to high water pressure, or accumulation of debris. Over time, it may loosen or crack, affecting the spray arm's performance.

Symptoms of a bad spray arm nut include:

• The spray arm not rotating properly
• Water not being distributed evenly during the wash cycle
• The spray arm detaching from its mount
• Noisy operation or rattling sounds

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Lower Spray Arm Support is an OEM replacement part for Whirlpool built-in dishwashers. Attached underneath the wash arms enclosure, this bracket securely anchors the rotating lower spray arm inside the lower dishrack.

Causes of failure involve cracking or stripping of securing clips allowing excessive movement during high-pressure spray cycles. Mineral buildup over time can also obstruct smooth operation.

Symptoms consist of:

• Detached lower spray arm failing to thoroughly rinse lower rack dishes
• Abnormal noises and vibrations from mobility during operation
• Ineffective cleaning even on light soil levels
• The lower spray arm not rotating or spinning freely during wash cycles

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

To order seal use WP8268340.

The Spray Arm Mount is an OEM part for Whirlpool dishwashers. This part allows the spray arm to rotate and spray water effectively to clean dishes. The mount ensures that the spray arm remains properly positioned and functions correctly during the wash cycle.

Causes of a bad spray arm mount can include wear and tear from frequent use, damage from heavy loads or improper loading of dishes, and exposure to harsh detergents and high temperatures.  

Symptoms of a bad spray arm mount include:

• The spray arm not rotating properly
• Poor cleaning results on dishes
• Unusual noises during the wash cycle
• The spray arm detaching or wobbling

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement mount secures the dishwasher's upper spray assembly in place, keeping it aligned so it spins freely and delivers consistent water coverage to the upper rack for dependable cleaning performance.

• Holds the up-spray/upper spray arm assembly securely inside the tub
• Maintains proper alignment and clearance for free rotation
• Common symptoms: upper spray arm loose or falls off, poor cleaning on the top rack, rattling from the arm striking the rack or tub, visible cracks in the mount
• Restores stable support after a worn or broken mount

• Disconnect power and water supply before servicing
• Remove the upper rack for access; release the old mount and transfer the spray arm if attached
• Seat and lock the new mount; verify the upper spray arm spins freely
• Run a short test cycle to confirm proper operation

This lower spray arm assembly circulates wash water from the pump to clean dishes on the lower rack. The integrated shield helps direct water flow and protect the arm from debris, restoring consistent wash coverage.

• Distributes high-pressure water across the lower rack for effective cleaning
• Shield design helps prevent debris intrusion and improves spray pattern
• Common failure signs: poor lower-rack cleaning, noisy or restricted rotation, cracked or warped arm, clogged spray holes
• Also addresses leaking or splashing caused by a damaged or misaligned arm/shield

• Disconnect power and turn off water supply before servicing
• Remove lower rack; lift off old arm assembly per model design
• Clear any debris from pump outlet and sump before installing
• Ensure the new arm spins freely and is fully seated; test for smooth rotation

This replacement upper spray arm restores strong spray coverage to the upper wash level of your dishwasher. It channels water through its jets and spins under pressure to help deliver consistently clean dishes on the top rack.

• Directs pressurized wash water to the upper wash level for thorough cleaning
• Rotates under water pressure for even spray coverage
• Helps clear food soils and detergent residue from dishes and glasses
• Common symptoms: poor cleaning on the upper rack, spray arm not spinning, clogged or cracked arm

• Disconnect power and shut off the water supply before servicing
• Open the dishwasher; remove the upper rack if needed for access
• Release or unthread the retainer and pull the old arm straight off; clear debris from the hub/feed port
• Seat the new arm and secure the retainer hand-tight; ensure the arm spins freely and run a test cycle

Upper spray arm with heatseal that restores water distribution to the dishwasher's upper rack for improved cleaning and rinsing. Replace a worn, cracked, clogged, or leaking upper spray arm to recover normal spray coverage. What it does:

• Directs pressurized spray to the upper rack so dishes and glassware rinse and wash more effectively; use when cleaning is inconsistent.
• Replaces cracked, bent, or clogged spray arm that no longer spins or sprays evenly.
• Includes a heatseal to help maintain a proper seal at the mounting area and prevent dripping or loss of water pressure.
• Helps eliminate symptoms like poor cleaning, visible water pooling, or uneven rinse patterns.

• Always disconnect power to the dishwasher (unplug or switch off the circuit breaker) before servicing.
• Empty and remove the upper rack to access the spray arm; inspect the mounting area and rotor for debris before installing.
• Installation is typically straightforward; confirm the attachment method for your model and use only OEM-recommended orientation.
• After installation, run a short cycle to check for leaks.

Also considered middle sprayarm on some dishwashers having a rinse arm on the ceiling.

This tower protector is a small plastic cover that fits over the dishwasher's spray tower. It helps keep dishes and utensils from obstructing the tower's spray outlets so water can circulate properly for consistent cleaning.

• Shields the spray tower to prevent items from blocking water flow
• Helps maintain proper spray pressure and coverage to upper areas
• Replaces cracked, melted, or missing protectors that can lead to poor cleaning
• Common signs it's needed: protector is broken/loose, deformed, or repeatedly falls off; dishes aren't getting clean due to blocked spray

• Disconnect power and water before service
• Allow the dishwasher interior to cool
• Open the door, remove the lower rack, and snap the protector into place per the tower/rack design
• Verify it seats securely and does not interfere with the spray tower movement

Notes: Only one screw hole is used now.

This lower wash arm bearing keeps the dishwasher's lower spray arm turning smoothly so dishes get even water coverage. It replaces a worn bearing to reduce noise and restore proper spray-arm rotation. What it does:

• Supports the lower spray arm so it can spin freely during cycles
• Helps maintain even water distribution for better cleaning
• Reduces grinding or scraping noises caused by a worn bearing
• Prevents wobbling or misalignment of the lower spray arm

• Disconnect power and shut off the water supply before starting any repair
• Inspect the spray arm and mounting surfaces for damage; clean before installing the new bearing