Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Estate Washer Hose Or Tube

Best Seller
Estate Internal Drain Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10358149

The Internal Drain Hose is an OEM part for Whirlpool washing machines. This hose is responsible for carrying used water from the washer tub to the drain pump, facilitating the efficient removal of water during the drain cycles. It ensures that water is properly directed out of the washer, preventing leaks and maintaining optimal washing performance.

Causes of a bad internal drain hose can include blockages from debris or lint, wear and tear from regular use, or damage such as cracks or splits from mishandling or aging.

Symptoms of a bad internal drain hose include:

  • Water leaking inside or around the washer
  • Slow or incomplete draining
  • Error codes related to draining issues
  • Unusual noises during the drain cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Water leak   Jeff R. • Bryan , TX • September 23, 2014

Replaced internal drain hose. and while I was in there I changed some known wear items. water pump,direct drive coupling tub to pump hose and a spring Read more

More
$27.95
Compare At:
$33.26
You Save:
$5.31

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Estate Tub To Pump Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: 285871

The Tub to Pump Hose is an OEM replacement part for Whirlpool washing machines. It connects the washer tub assembly to the pump, carrying water drained from the tub into the pump housing. This hose is a component that allows the machine to drain water efficiently during the spin cycle.

Causes of a bad tub to pump hose can include mineral buildup that restricts water flow, fatigue and wearing that cause cracks or splits, damage from rodents or sharp/heavy objects in the wash load, and deterioration from age that increases brittleness.

Symptoms of a bad hose include:

  • Water leaks during or after the drain cycle
  • Inability to fully drain water from the tub
  • Water remaining in the tub after spinning

This genuine Whirlpool OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Water leak   Steven K. • New City , NY • August 10, 2018

Took off cover, installed new parts. Read more

More
$17.95
Compare At:
$21.36
You Save:
$3.41

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Estate Vacuum Break Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8317926

The Vacuum Break Hose is an OEM part for Whirlpool washing machines. It connects the vacuum break to the outer tub, preventing siphoning and ensuring proper water levels during the wash cycle. This hose plays a crucial role in maintaining the efficiency and performance of the washing machine by regulating the water flow.

Causes of a bad vacuum break hose can include wear and tear over time, kinks or blockages in the hose, or damage due to improper installation or handling. A compromised hose can affect water levels and overall washing performance.

Symptoms of a bad vacuum break hose include:

  • Water not draining properly
  • inconsistent water levels in the tub
  • Leaks or puddles around the washing machine
  • Error codes related to water flow or pressure

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Hose broke sending water that was supposed to goto the tub directly onto the floor.   Trent M. • Tinley Park , IL • March 14, 2014

Unscrewed console and tilted it back. Then removed clips for machine skin. Rocked it back slightly to access the tub side hose. Removed water inlet valve assembly and removed from the valve. Fished out the old hose. Fished in new hose. Reattched it then reassembled unit. Spent 15 min looking for clip I lost on NASTY FLOOR AAAAAARGH! When done I tested it then found the cold inlet hose screen was clogged. Went to store and replaced hoses and inlet screens too. Glanced over at other washer and... Read more

More
$23.95
Compare At:
$28.50
You Save:
$4.55

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Estate Vacuum Break Inlet Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3357328

The Vacuum Break Inlet Hose is an OEM part for Whirlpool washing machines. This hose is designed to prevent backflow of water into the washer, ensuring that water flows in the correct direction during the wash cycle. It plays a crucial role in maintaining the efficiency and hygiene of the washing process.

Common causes of a bad hose include regular wear and tear, exposure to harsh detergents, or accidental punctures. A compromised hose can lead to water flow issues and potentially contaminate the wash water.

Symptoms of a bad vacuum break inlet hose include:

  • Water leakage around the hose area
  • The washer not filling properly
  • Backflow of water into the washer
  • Reduced water pressure during the wash cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You My washing machine smelt horrible   Bryan W. • Ogdensburg , NY • August 20, 2018

First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available.... Read more

More
$18.95
Compare At:
$22.55
You Save:
$3.60

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Estate Drain Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10096921

The Drain Hose is an OEM part for Whirlpool washing machines. It is responsible for directing and carrying away water that is pumped out of the washer tub during drain cycles. The drain hose connects from the bottom of the washtub to the household plumbing or out the back of the machine. This washer drain hose includes the retaining clips to hold in place.

Causes of a bad drain hose can include mineral deposits from hard water building up inside the hose, cracking from flexing during use, rodent damage, or general degradation from years of service.

Symptoms of a faulty drain hose include:

  • Water not completely draining from the washer tub after cycles
  • Puddles or flooding under the appliance
  • Strange noises or vibrations during drainage

This part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Washing machine not draining completely   Kenneth L. • Telford , PA • October 16, 2016

I searched YouTube and found several videos that helped me diagnose the most probable cause. I learned how to open the cabinet and access the parts from the videos. I ordered a new discharge hose and a replacement pump. The parts came in the next day with the standard shipping option! It turned out that the old discharge hose was blocked. I decided to replace the pump also since I had the machine open and the new pump was only $22. It's amazing what you can learn online! Read more

More
$48.95
Compare At:
$58.74
You Save:
$9.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Estate Drain Hose Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10189267

The Drain Hose Assembly is an OEM part for Whirlpool washing machines. It is responsible for carrying wastewater from the washer to the household drain during the wash and spin cycles.  

Causes of a bad drain hose assembly can include blockages from debris, kinks or cracks in the hose, or general wear and tear from repeated use.  

Symptoms of a bad drain hose assembly include:

  • Water not draining properly from the washer
  • Leaks or puddles around the washer
  • Visible cracks or damage to the hose
  • Unpleasant odors due to standing water

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Free washer missing drain hose assembly   Jonathan J. • Lexington , OH • March 26, 2016

I searched for parts on the internet regarding the make and model of my washer. Appliance Parts Pros not only had the part on a very user friendly website, but also had a well done video that made fixing the problem a breeze. Much appreciated and will buy from here from now on. Highly recommend! My local parts store did not have the part and would have to order it anyway. Read more

More
$48.95
Compare At:
$57.76
You Save:
$8.81

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Estate Drain Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: 285664

Size: 48 inches long. Clamp included. For 21 inch extension use 285702.

Do-It-Yourself Stories from Customers like You Drain hose too short and home depot fix leaked   Sara B. • Liberty Hill , TX • August 21, 2015

Ordered a new drain hose and extension part. The prices including shipping were more reasonable than driving back and forth to the store just to piece meal parts together. Very frustrating. I ordered the parts that were specific to our washing machine, it took maybe 5 minutes to install, and everything fit perfectly. Now we're washing again and no leaks! Read more

More
$31.95
Compare At:
$37.70
You Save:
$5.75

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Estate Washer Fill Hoses
By: Pro
Part Number: TJ725RBFFP

The Washer Fill Hoses are OEM parts for various washing machines, specifically designed to transport hot and cold water from the home's supply lines to the washer. These hoses are essential for the proper functioning of the washing machine, ensuring a steady and reliable flow of water during the wash and rinse cycles. Coming in packs of 2, each hose measures 5 ft.

Causes of bad washer fill hoses can include wear and tear over time, exposure to high water pressure, or damage from kinks and bends. Additionally, hoses can deteriorate due to exposure to harsh water conditions or chemical buildup.

Symptoms of bad washer fill hoses include:

  • Leaks or puddles around the washing machine
  • Reduced water flow into the washer
  • Visible cracks or bulges in the hoses
  • The washer taking longer than usual to fill with water

These washer fill hoses are compatible with a variety of washing machine brands and models, ensuring a secure and efficient water supply.

Do-It-Yourself Stories from Customers like You Washer would not spin nor adgitate   Jeff A. • Stow , OH • June 28, 2015

Motor control board was flashing 4 times, indicating that the mode shifter had an error. I disconnected the mode shifter's wire from the controller and measured the resistance between the 2 leads with an ohmmeter. Since the reading was infinite, that meant that the mode shifter coil or in-line thermal sensor was electrically open, i.e. bad. As this fix is near a complete tear-down of the washing machine, here are a few tips I discovered. 1) the hub nut is difficult to remove and you need a... Read more

More
$13.71
Compare At:
$16.18
You Save:
$2.47

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Estate Fill Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: WP89503

Size: 5 foot long. Rubber fill hose used on most automatic washing machines. Two hoses used per machine.

Do-It-Yourself Stories from Customers like You Low water flow and fabric softener would dispense immediately when cycle started   Bob G. • Sylacauga , AL • January 19, 2019

Replaced flow meter and control valve Read more

More
$16.59
Compare At:
$19.58
You Save:
$2.99

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Estate Drain Connector
Genuine Whirlpool part
By: Whirlpool
Part Number: W11512417

The Refrigerator Drain Connector is an OEM part for Whirlpool refrigerators. It is responsible for directing water and condensation from the evaporator fan coil and defrost into the drain pan. 

Causes of a bad drain connector can include cracks, breaks or deformations caused by repeated thermal cycling or impact damage. Mineral or lime buildup inside the connector over many years can also restrict water flow.

Symptoms of a bad drain connector include:

  • Water or condensation leaks around the connector area 
  • Puddles or watermarks on the floor behind the fridge
  • Slow drainage of water from the evaporator fan coil
  • Mold or mildew growth near the connector or drain area

This replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You The problem was ice buildup on the floor of the freezer   William B. • Pahoa , HI • January 15, 2016

A YouTube video: https://www.youtube.com/watch?v=jIdtNdDXFDk , by a professional appliance repair company described replacement of the freezer drain pipe with Kenmore's (by Whirlpool) revised drain pipe. Ice buildup inside the freezer was caused by warm air beneath the freezer contacting cold air from inside the freezer the resulting condensation freezing and blocking the drain, causing the ice buildup inside. The revised drain tube functions as a p-trap to prevent cold/warm air interaction.... Read more

More
$25.95
Compare At:
$31.14
You Save:
$5.19

IN STOCK
Ships Today Guaranteed
Add to Cart
Estate Fill Hose Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212638RP

Contains two, six foot long braided hoses with 90 degree ends.

Do-It-Yourself Stories from Customers like You Kenmore fh error code   Michael H. • Cataula , GA • January 18, 2015

I had a problem with the drain pump on my Kenmore HE3 and I replaced it using a drain pump I ordered from APP. That fixed that problem but once I started running the washer I started getting a FH error code. I looked it up and found that it was a problem with the washer not filling properly. I pulled the washer out and found that one of the fill hoses had kinked when I pushed the washer back in place. There was also some writing on the hose that read "Change hose every five years". I know I had... Read more

More
$46.95
Compare At:
$55.87
You Save:
$8.92

IN STOCK
Ships Today Guaranteed
Add to Cart
Estate Washer Fill Hoses (5 Ft), 2-Pack
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212487RP

This set of washer fill hoses connects your home's hot and cold water supply to the washer's inlet valves. Replacing aging hoses helps prevent leaks and ensures the washer fills properly for every cycle.

  • Supplies hot and cold water from household faucets to the washer's inlet valves
  • Helps address leaks, bulges, or cracks in old hoses
  • Can resolve drips at fittings and water on the floor
  • Improve slow or no-fill issues caused by kinks or internal blockages
What's included: Two 5-ft washer water inlet hoses. Install notes:
  • Unplug the washer and turn off both water supplies before starting
  • Place a towel or pan to catch residual water; disconnect old hoses from faucets and inlet valves
  • Attach new hoses to the correct hot/cold connections; tighten connections securely without overtightening
  • Open valves, check for leaks at both ends, and re-tighten if needed

Do-It-Yourself Stories from Customers like You Water inlet was obstructed   Jessica C. • Mount Shasta , CA • April 15, 2018

Watched u tube video. Ordered replacement water inlet valve and new hoses. Dismantled washer and replaced defective valve and installed new hoses. The repair went very easily and the washer worked perfectly as a result. Read more

More
$40.78
Compare At:
$48.53
You Save:
$7.75

IN STOCK
Ships Today Guaranteed
Add to Cart
Estate External Drain Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: 285666

Size: 8 foot long. This external washer drain hose is needed when there is more distance between the washer and the drain. Note: comes with 1.5" diameter clamp but hose is 1.25" in diameter; therefore you may need to order the 1.25" diameter clamp separately: WP356138

Do-It-Yourself Stories from Customers like You I was replacing the lid switch but decided to install a new vacuum break and drain hose while i was at it   Dianne Z. • Manchester , CT • May 27, 2016

Just took off the old vacuum break and put the new one on. It was very easy because the site had a video showing how and I watched it first. Read more

More
$44.95
Compare At:
$53.49
You Save:
$8.54

IN STOCK
Ships Today Guaranteed
Add to Cart
Estate Drain Hose Extension
Genuine Whirlpool part
By: Whirlpool
Part Number: 285702

Size: 21 inches long. Clamp included.

Do-It-Yourself Stories from Customers like You Drain hose too short and home depot fix leaked   Sara B. • Liberty Hill , TX • August 21, 2015

Ordered a new drain hose and extension part. The prices including shipping were more reasonable than driving back and forth to the store just to piece meal parts together. Very frustrating. I ordered the parts that were specific to our washing machine, it took maybe 5 minutes to install, and everything fit perfectly. Now we're washing again and no leaks! Read more

More
$47.58

IN STOCK
Ships Today Guaranteed
Add to Cart
Estate Hose (Flexible)
Genuine Whirlpool part
By: Whirlpool
Part Number: 40922

Replacement flexible hose that routes water inside your appliance, restoring secure flow and helping prevent leaks or drainage problems caused by cracked, kinked, or worn hoses. What it does:

  • Directs water to and from appliance components during normal operation.
  • Prevents leaks when hose walls and fittings are intact.
  • Common symptom fix: visible leaks, water pooling beneath the appliance, or reduced/irregular water flow.
  • Fits in-line with existing clamps and fittings to maintain proper routing.
What's included: One replacement hose. Install notes:
  • Disconnect power and shut off the water supply before starting any repair.
  • Inspect and replace clamps or fittings if corroded or damaged; use proper-size clamps for a secure seal.
  • Route hose without sharp bends or kinks and avoid contact with hot surfaces or moving parts.

Do-It-Yourself Stories from Customers like You New washing machine with drainage hose too short purchased the extension hose znd it worked greater   Joyce R. • Blanco , TX • June 28, 2015

Added the extension drainage hose Read more

More
$41.95
Compare At:
$50.34
You Save:
$8.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Estate Washer Fill Hoses (Hot And Cold), 2-Pack, 5 Ft
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212545RP

Replace aging or leaking washer supply lines with this fill hose kit. It provides two 5-foot hoses to connect your home's hot and cold water valves to the washer, helping maintain a secure connection and consistent filling.

  • Connects hot and cold water faucets to the washer's inlet valves
  • Replace if hoses are leaking, cracked, bulging, or kinked
  • Can help address slow filling caused by restricted or kinked hoses
  • Useful when installing or relocating a washer
What's included: Two 5-ft water inlet hoses. Install notes:
  • Unplug the washer and shut off both water supply valves before starting
  • Place a towel or pan to catch residual water; disconnect old hoses from faucet and washer
  • Match hot to hot and cold to cold; hand-start threads to avoid cross-threading, then tighten firmly without overtightening
  • Restore water and power; run a fill test and check all connections for leaks

Do-It-Yourself Stories from Customers like You Cold water inlet valve would not shut off in Kenmore washer   Tim H. • Homeworth , OH • December 15, 2018

Replaced the water inlet valve assembly. I was surprised how easy it was to do. A putty knife to release the panel and a screw driver to release 2 clips. Ordered the parts on Tuesday, received them the next day and the washer was back in business. The wife is happy, and when she's happy, eveybody's happy! Glad I found your site!! Read more

More
$36.59
Compare At:
$43.91
You Save:
$7.32

IN STOCK
Ships Today Guaranteed
Add to Cart

Estate washer hose or tube replacement parts are essential for maintaining your washing machine's peak performance. These parts play a crucial role, ensuring that water flows correctly in and out of the washer, which is fundamental to every wash cycle. By using quality Estate washer parts, you ensure your appliance operates smoothly, which can extend its lifespan and save you from costly repairs or replacements down the line.

When it comes to Estate washer hose or tube replacement parts, opting for OEM versions is always a smart choice. These Original Equipment Manufacturer parts are designed to be a perfect fit for your specific model, guaranteeing compatibility and reliability. After all, the last thing you want is a hose or tube that doesn't quite fit right, leading to leaks or inefficient washing cycles.

Feel confident that Estate washer hose or tube replacement parts are readily available and built to last. With top-notch quality and fit, they'll help keep your washer running efficiently, ensuring you get the most out of your appliance. So, the next time you need to replace a hose or tube, you can trust in the quality and availability of Estate washer parts.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store