Parts for Ge ZISB480DRD: 01 - Freezer Door Parts

Replace your refrigerator water filter every 6 months to maintain clean water and ice. Removes contaminants for fresh taste. Easy DIY install in minutes.

Assorted fasteners for securing refrigerator trim, panels, and components. Replace missing, stripped, or damaged screws and clips for proper assembly.

Outer door panel for refrigerator. Installs as the exterior surface of the door assembly. Replace if cracked, dented, scratched, or damaged.

Fix cracked or fallen dispenser trim that prevents reliable operation. This collar kit restores alignment and appearance around your dispenser opening.

Replacement top hinge assembly for side-by-side refrigerator freezer doors. Needed when the hinge is cracked, broken, or worn causing door misalignment.

Bottom freezer door hinge secures and guides the lower door pivot. Replace if your hinge is worn, bent, broken, or missing to restore proper alignment.

Bottom hinge bushing for refrigerator freezer doors. Installs at the lower hinge to help the door pivot smoothly. Replace if worn, cracked, or missing.

Creates an airtight seal to keep cold air in. Replace if torn, warped, or leaking to restore proper sealing and temperature control. Confirm fit by model.

Flip-up cover for refrigerator door bin compartments. Replace cracked, broken, or missing covers to keep items contained and restore a finished look.

Secures the decorative trim on your freezer door handle. Replace if missing, stripped, or damaged to restore the handle's finished appearance.

Plastic shield that covers the water and ice dispenser housing on your refrigerator door. Replace if cracked, warped, or broken from impact or heat damage.

This is the ice chute funnel that guides ice from the dispenser mechanism into your glass on the exterior of the refrigerator door. It channels crushed or cubed ice downward through the dispenser opening to prevent spillage. Replace this funnel if ice is scattering, jamming, or missing the glass during dispensing - often caused by cracks, warping, or a broken lever on the funnel assembly.

Water or ice dispenser not working? This dispenser switch activates when you press the lever. Easy DIY repair—takes about 30 minutes with basic tools.

The Torsion Spring is an OEM part for GE refrigerators. It is essential for maintaining the proper tension and operation of the refrigerator door. This spring ensures the door closes smoothly and stays securely shut, preventing cold air from escaping and maintaining the appliance’s efficiency.

Causes of a bad torsion spring can include metal fatigue from regular use, corrosion from exposure to moisture, or damage due to excessive force or mishandling. Over time, these factors can weaken the spring, affecting the door’s performance.

Symptoms of a bad Torsion Spring include:

• Door not staying closed
• Difficulty in opening or closing the door
• Door feels loose or unbalanced
• Unusual noises when operating the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Directs and protects your refrigerator lamp for even interior lighting. Replace if cracked, discolored, or light appears dim. Confirm fit with model number.

Fix a light that won't turn on or flickers in your refrigerator. This E12 socket replacement is straightforward with our step-by-step video guide.

Illuminates water and ice dispenser area for visibility in low light. Replace when bulb burns out or dispenser area stays dark. Confirm fit with model.

Replacement dispenser door recess crank for refrigerators. Operates the ice/water dispenser door mechanism. Replace if broken, worn, or corroded.

Ice dispenser door assembly seals the ice chute opening on your refrigerator. Replace if cracked, warped, or the rubber gasket is damaged and leaking air.

This top freezer door trim replaces the upper decorative and protective trim on the freezer door, restoring a finished look and helping seal and align the door edge. It's a direct-fit exterior trim piece for compatible models. What it does:

• Covers and protects the top edge of the freezer door while providing a finished appearance
• Helps maintain proper door alignment and sealing where the trim interfaces with the door
• Replaces faded, scratched, or damaged trim that can affect door fit and aesthetics
• Matches original OEM fit and mounting points for a clean repair

• One top freezer door trim piece

• Installation requires removing the freezer door trim screws or clips; keep hardware for reassembly
• Use a soft cloth to avoid scratching the trim during installation
• Disconnect power only if removal requires tilting or taking the door off to avoid injury

Decorative trim piece that covers the handle mounting area on your refrigerator door. Replace if cracked, chipped, discolored, or missing for a clean look.

Ice won't dispense or dispenser flap sticks open? The ice dispenser solenoid controls ice flow. DIY-friendly repair with our install video.

This pack contains twelve replacement screws used to fasten appliance panels, trim, and components. They restore secure mounting and help stop rattling, loose panels, and gaps for a safer, quieter appliance. What it does:

• Secures exterior and interior panels, brackets, and trim pieces
• Restores proper fit where missing or stripped screws cause movement or noise
• Helps maintain appliance alignment and prevents parts from vibrating loose
• Used for general-purpose repairs on compatible GE appliances

• Disconnect power or unplug the appliance before performing any internal repairs
• Use the correct screwdriver bit and avoid overtightening to prevent stripping threads
• Keep remaining screws in a labeled container for future service
• If a screw does not seat easily, stop and verify correct fit to avoid damage

Replacement drip tray for refrigerator water and ice dispensers. Catches drips and spills at the dispenser. Replace if cracked, broken, or stained.

Fix dispenser lights not working or unresponsive touch controls. This glass touch dispenser assembly restores water and ice dispensing on your refrigerator.

Black plastic funnel extension attaches to the front of your refrigerator's ice dispenser. Replace if cracked, broken, or missing to reduce splashing.

Replacement mounting screw that secures panels and internal components in your freezer. Replace stripped, rusted, or missing fasteners to restore stability.

Replaces a cracked, broken, or missing door handle trim cover on your refrigerator or freezer. Snaps into place to hide fasteners and restore a finished look.