Freezer Handle

The Door Handle is an OEM part for Frigidaire refrigerators. This part allows for easy opening and closing of the door, ensuring convenient access to your frozen foods. 

Over time, door handles can become loose, cracked, or completely break off due to frequent use, accidental impacts, or material fatigue. This can make opening the freezer more difficult and may even lead to further damage to the door or the sealing mechanism if users apply excessive force when trying to open or close the door.

Symptoms of a bad Door Handle include:

• The handle is loose or wobbly
• Visible cracks or breaks in the handle
• Difficulty in opening the door due to a damaged or missing handle 

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This replacement door handle restores a secure, comfortable grip for opening and closing your appliance door. Replace a cracked or loose handle to keep everyday use safe and convenient when the original is damaged or missing.

• Provides the handhold used to open and close the door
• Replaces cracked, broken, or missing handles to restore normal operation
• Addresses a wobbly/loose handle or stripped mounting points
• Common symptoms: handle broken, loose, or difficult to grip; trouble opening the door

• Disconnect power before servicing
• Support the door while removing and installing the handle
• Use the correct screwdriver; transfer any screw caps/end covers as needed and reuse original fasteners if applicable
• Tighten mounting screws evenly; do not overtighten, and ensure the handle is secure and aligned

This handle trim replaces a damaged or missing trim piece on the appliance's door handle. It restores a clean, finished look by covering mounting hardware and helps keep the handle properly aligned for everyday use.

• Finishes the end of the door handle and hides visible screws
• Helps stabilize the handle and maintain proper alignment
• Restores appearance when the original trim is cracked, loose, or missing
• Common signs: broken or missing cap, exposed screws, wobbly handle

• Disconnect power before servicing
• Open the door to access the handle; remove the old trim by releasing its clips or fasteners
• Align and snap the new trim into place; transfer any hardware if required
• Do not overtighten fasteners to avoid damaging plastic parts

This handle insert fits into the handle assembly to cover mounting hardware and complete the finished look. Replace a missing or cracked insert to restore appearance and help protect the hardware underneath.

• Press-fits into the handle to conceal fasteners and provide a clean, finished appearance
• Helps keep debris out of the handle cavity and around screw heads
• Typical symptoms: insert broken or missing, exposed fasteners, rough or sharp handle opening edges

• Disconnect power before servicing; wear gloves to protect hands from sharp edges
• Carefully pry out the old insert with a plastic tool to avoid marring surrounding surfaces
• Align the new insert with any tabs/slots and press evenly until fully seated
• Tighten screws beneath the insert before installing the new piece

Replace a cracked or loose handle with this handle assembly to restore a solid, comfortable grip when opening and closing your appliance. It helps keep daily use easy while refreshing the unit's appearance. What it does:

• Provides the handhold used to open and close the door or lid
• Restores usability when the original handle is cracked, loose, or missing
• Helps correct issues like wobbling, broken mounting points, or the handle pulling free
• Improves ergonomics and appearance versus a damaged or worn handle

• One handle assembly

• Disconnect power before beginning work; wear cut-resistant gloves
• Remove the existing handle and retain any model-specific screws or trim for reuse
• Align the new handle with existing mounting holes and tighten screws snugly—do not overtighten
• Verify smooth door/lid operation and secure fit after installation

Replacement refrigerator door handle that restores a secure, comfortable grip for opening and closing the door. Ideal when the original is cracked, loose, spinning, or otherwise damaged—brings back normal operation and appearance. What it does:

• Replaces broken, cracked, loose, or missing door handles that make the door difficult to open.
• Provides a stable grip for everyday use and helps protect door edges and seals from damage caused by improper handling.
• Designed as a direct-fit replacement for compatible refrigerator doors.
• Restores the appliance's appearance by replacing visibly worn or damaged hardware.

• Removal of door trim or access screws is typically required; keep all mounting screws and any trim pieces for reassembly.
• Use basic hand tools and avoid overtightening fasteners to prevent cracking the replacement handle.
• If working near electrical components or lights, unplug the appliance or shut off power before starting.

This is one endcap. Order quantity needed.

This replacement door handle restores a secure grip for opening and closing the appliance door and improves usability and appearance. It fits the OEM mount points and matches the original design for a direct replacement. What it does:

• Provides a solid, ergonomic grip to open and close the appliance door
• Replaces cracked, broken, or loose handles that won't stay secure
• Helps restore proper door operation and user access
• Matches the original mounting locations for a straightforward swap

• Disconnect power to the appliance before starting any work
• Use basic hand tools to remove the old handle screws or fasteners and install the new handle
• Keep removed screws and small parts in a safe place for re-use

This short half-moon handle provides a compact, ergonomic grip to open and close a refrigerator or freezer drawer or door. It replaces a worn, cracked or broken short half-moon style handle to restore safe, reliable operation. What it does:

• Replaces a damaged or missing short half-moon style handle used on select appliance doors or drawers
• Restores a secure grip so panels open and close smoothly
• Prevents sharp edges or loose hardware that can catch clothing or skin
• Fits applications that use the short half-moon shape and mounting pattern

• Use basic hand tools; avoid overtightening fasteners to prevent cracking
• Disconnect power and follow appliance safety guidelines

This replacement door handle restores a damaged or worn refrigerator door grip so the door opens and closes smoothly and looks finished. It matches OEM fit and styling for direct swap replacements. What it does:

• Provides a secure gripping surface for opening and closing the refrigerator door
• Replaces cracked, loose, or cosmetically damaged handles
• Restores proper door operation when original handle interferes with sealing or use
• Matches original mounting locations for a direct replacement

• Disconnect power to the appliance or unplug the refrigerator before beginning work.
• Remove any trim or access covers to expose handle fasteners; keep small parts organized.
• Use appropriate hand tools; avoid over-tightening fasteners to prevent cracking the handle.

This genuine replacement door handle restores a secure, easy-to-grip surface for opening and closing your refrigerator door. It replaces a cracked, broken or worn handle so the door can be operated safely and comfortably. What it does:

• Provides a solid grip for opening and closing the refrigerator door
• Replaces handles that are cracked, broken, loose or cosmetically damaged
• Helps prevent further damage to the door edge caused by using a damaged handle
• Restores original appearance and functionality

• One refrigerator door handle

• High-level, basic replacement — typically mounts with screws or fasteners hidden under a trim/cover; use appropriate hand tools
• Support the door during removal/installation to avoid stressing the hinges or other components
• Tighten fasteners until secure but avoid over-torquing to prevent cracking the handle
• Wear protective gloves and follow appliance safety guidance; disconnect power only if required by your appliance's service instructions

The Handle is an OEM part for Frigidaire freezers. It serves as the primary point of access to the freezer compartment, allowing you to open and close the door with ease. This handle is designed to provide a secure and comfortable grip, ensuring smooth operation when retrieving or storing frozen items.

Causes of a bad handle include physical damage from impact or excessive force, loosening over time due to repeated use, or general wear and tear on the handle or its mounting hardware.

Symptoms of a bad handle include:

• Difficulty opening or closing the freezer door
• A loose or wobbly handle that feels insecure
• Visible cracks, breaks, or deformation in the handle itself

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.