Parts for Ge GSL22JGBBLB: 07 - Fresh Food Shelves Parts

Replace your refrigerator water filter every 6 months to maintain clean water and ice. Removes contaminants for fresh taste. Easy DIY install in minutes.

Fix uneven cooling or defrost issues with a new temperature sensor. Most DIYers complete this repair in under an hour with basic tools and our video.

Replacement crisper pan for storing fresh produce in your refrigerator. Order a new pan if yours is cracked, broken, or missing. Direct fit part.

Clear meat pan for side-by-side refrigerators. Stores raw meats and poultry in the fresh food compartment. Replace if cracked, broken, or missing.

Clear glass cover that sits above the crisper drawer in your refrigerator. Replace if cracked, chipped, or shattered from impact or heavy items.

Replace your broken or missing refrigerator crisper drawer handle. This handle attaches to the front of your vegetable drawer for easy opening and closing.

Color: white. It measures about 16 inches wide by 2 inches high by 2 inches deep.

Color: white. Measures about 3-1/2 inches wide by 1 inch high.

Seals the front edge of your refrigerator's crisper or pantry drawer pan cover to prevent cold air loss. Replace if worn, cracked, or not sealing properly.

White foam gasket that seals refrigerator shelf edges. Replace if worn, cracked, or missing to prevent spills and maintain proper support. Verify fit with your model number.

Protective cover for the fresh food compartment temperature sensor in your refrigerator. Replace if cracked, broken, or missing to shield the thermistor.

Humidity control slider for refrigerator crisper drawers. Replaces broken, cracked, or missing adjusters. Installs on drawer to regulate airflow and moisture.

Slide bearing for refrigerator drawer rails. Enables smooth in-and-out drawer movement. Replace if cracked, worn, or causing drawers to stick or jam.

Replacement lower snack pan for GE refrigerators. Stores snacks and small items in an organized drawer. Replace if cracked, broken, or damaged.

The Snack Pan Handle is an OEM replacement part for GE bottom-mount refrigerators. This specialty handle provides access to stored snacks, drinks, or condiments within the snack pan shelf located above the main fresh food compartment. 

Causes of a faulty handle can include broken mounting clips from repeated grasping, or general wear and tear of the plastic surface.

Symptoms include:

• Loose or unstable handle that does not grip the shelf securely  
• Handle detaching completely from shelf mounting points
• Inability to retrieve items placed on the snack shelf

It is compatible with Hotpoint, RCA, and specific Kenmore models as well.

Left-hand drawer slide rail for refrigerator crisper or sealed pan drawers. Replace cracked, broken, or damaged rails for smooth drawer operation.

Right side drawer slide rail for refrigerator crisper and produce drawers. Replace broken, cracked, or damaged rails that no longer support smooth drawer movement.

Right-hand drawer slide assembly for refrigerator crisper and meat pan drawers. Replace if cracked, broken, or causing drawers to sag or drop.

Left-hand slide rail for refrigerator drawer assemblies. Guides crisper bins smoothly in and out. Replace if cracked, broken, or drawer won't glide properly.

This screw is a genuine General Electric part, sold individually. This screw can be used as a replacement part for a refrigerator. A screw can suffer damage in the lifespan of a refrigerator. It can also be easily lost or misplaced. Screws are small parts and are usually installed in multiples to ensure components are reliably attached, so one screw loosening or going missing might not necessarily affect the operability of the refrigerator. However, if the components loosen or the screw suffers damage that strips the part, such as punctures or erosion to the metal material from general wear and tear or from a direct impact, the screw should be removed and replaced with this genuine OEM replacement part. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This screw is compatible with the following appliance brands: General Electric, Hotpoint, RCA, and Americana.

This is a 10-24 x 1.0 inch screw used to secure appliance panels and components. It replaces worn or missing fasteners to restore proper fit and reduce rattling or loose parts for safer, quieter operation. What it does:

• Secures panels, brackets, and trim to keep components aligned and stable
• Stops vibrating or rattling caused by loose or missing screws
• Restores proper grounding/attachment where a threaded fastener is required
• Matches OEM thread size and length for a correct fit when replacing damaged screws

• Use the correct driver bit and turn carefully to avoid stripping the head or threads
• Do not overtighten; snug until secure to prevent damage to mating parts
• Replace like-for-like with the same thread size and length for proper fit
• Disconnect power and follow appliance safety guidelines before accessing internal components