Frigidaire Tray & Related

This glass turntable tray sits on the microwave's roller support to provide a stable, rotating surface for even heating. Replacing a cracked or missing tray restores safe operation and helps keep spills contained for easier cleanup.

• Provides a flat, heat-resistant surface for dishes and cookware
• Engages the center coupler to rotate food for more uniform cooking and defrosting
• Removes easily for cleaning and helps contain minor spills
• Common symptoms: cracked/chipped glass, wobbling, won't sit level, or tray no longer rotates due to a worn hub

• Unplug the microwave or switch off the circuit breaker before service
• Remove the old tray; wipe the roller ring and cavity floor clean
• Inspect the center coupler and roller ring for wear; replace if damaged
• Align the new tray with the coupler so it sits flat and turns freely; test with a microwave-safe cup of water

The Coupler is an OEM replacement part for Frigidaire microwaves. It is a mechanical linkage component that connects the carousel plate to the turntable motor shaft inside the microwave cavity. 

Causes of a bad coupler can include wear from age and normal use, as well as breakage due to impact or excessive force.

Symptoms of a bad coupler include: 

• The carousel plate not spinning during operation
• Vibration or rattling noises coming from inside the microwave 
• Difficulty evenly cooking and heating food loads
• Potential jamming or binding of plate movement

This OEM Frigidaire part is also compatible with some Kenmore microwave models. Replacing the coupler ensures smooth, proper rotation needed for effective microwave cooking.

The Turntable Tray is an OEM part for Frigidaire microwaves. It sits inside the microwave and rotates food to ensure even cooking and heating. Made of durable glass, this tray is designed to withstand high temperatures and the repetitive motion of the microwave's turntable motor.

Damage can occur due to accidental drops, placing heavy items on the tray, or thermal stress from repeated heating cycles.

Symptoms of a bad turntable tray include:

• Cracks or chips on the glass surface
• Unstable or wobbling movement during operation
• Inability to rotate smoothly
• Food not heating evenly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This microwave turntable tray is the rotating platter that supports your dishes and helps heat food evenly. Replace a cracked, missing, or unstable tray to restore smooth rotation and consistent cooking performance.

• Provides a flat, heat-resistant surface for cookware during cooking and reheating
• Engages the center drive and roller ring to rotate food for more even heating
• Keeps containers centered and stable while the oven runs
• Typical symptoms: cracked/chipped or missing tray, wobbling/rocking, tray won't seat on the coupler, uneven heating due to a damaged platter

• Disconnect power to the microwave before servicing
• Lift out the old tray; clean any debris from the roller ring and drive hub
• Align the new tray with the center drive and ensure it sits flat and spins freely
• Run a brief test with a microwave-safe cup of water to confirm smooth rotation

This glass turntable tray provides a stable, heat-resistant surface that rotates food inside the microwave for more even cooking and reheating. It replaces a damaged or missing tray to restore proper rotation and support. What it does:

• Supports plates, bowls and containers while the microwave's turntable motor rotates them for even heating.
• Transfers rotation from the drive coupling through the roller/guide assembly to the glass tray.
• Restores stable, level rotation when the original tray is cracked, chipped, or missing.
• Helps prevent food spills inside the cavity by providing a flat, easy-to-clean surface.

• One glass turntable tray.

• Handle the glass carefully to avoid chips or cracks; wear gloves if necessary.
• Place tray onto the roller/guide and align with the drive coupling; it turns freely before use.
• Clean with mild detergent and non-abrasive cloth; do not use if the glass is cracked or severely chipped.
• If rotation problems persist after replacing the tray, check the roller/guide and drive coupling for wear.

The Glass Turntable Plate is an OEM part for Frigidaire microwaves. As the surface food rests upon during cooking, it features heat-resistant tempered glass construction suitable for high-power microwave usage. 

Causes of damage can include cracking or splitting from thermal shock of sudden temperature changes during repeated heating and cooling cycles. Improper cleaning methods using harsh chemicals may also degrade protective coatings.

Symptoms of a faulty glass plate involve: 

• Cracks or chips exposing sharp edges presenting a hazard
• Denting or warping preventing level rotation inside the cavity
• Staining or clouding compromising visibility of cooking foods

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore microwave models.

The Coupler is an OEM part for Frigidaire microwaves. It is responsible for providing a secure connection between the motor and the glass tray.  It enables the smooth rotation of the glass tray turntable, ensuring even heat distribution during the cooking process.

A bad coupler can occur due to wear and tear over time, accidental damage, or improper handling. Signs of a faulty coupler include the glass tray not rotating or turning unevenly during operation.

Symptoms of a bad coupler include:

• The glass tray not rotating 
• Uneven heating  
• Unusual noises  

Replace your faulty microwave glass tray turntable coupler with this genuine OEM Frigidaire part to restore your microwave. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Shelf Support is an OEM part for Frigidaire countertop microwaves. It holds and stabilizes shelving inside the microwave cavity during operation. 

Symptoms of a faulty shelf support include:

• Loose or detached shelves that cannot maintain placement  
• Difficulty positioning shelves at desired height levels
• Scrapes or dents on interior microwave walls from shelf movement
• Gaps or spaces where shelf legs do not sit securely  

Causes relate to typical wear of spring clips or brackets holding shelves in place. Regular vibration from microwave turntables can weaken pressure points over time.

This OEM replacement shelf is compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This support assembly secures and stabilizes an appliance component to the cabinet or frame, restoring proper alignment and reducing vibration. Ideal when a broken or worn support causes movement or instability of the affected area. What it does:

• Provides structural mounting to keep panels, controls, or other components properly aligned.
• Reduces vibration, rattling, or visible sagging caused by a failed or loose support.
• Restores reliable attachment after damage, deformation, or worn mounting points.
• Matches OEM diagram locating for direct-replacement fit when replacing the faulty part.

• Disconnect power and unplug the appliance before starting any repair.
• Follow the OEM diagram for correct placement and fastener locations.
• Use appropriate hand tools and wear gloves to avoid sharp edges; inspect surrounding mounting hardware and replace if damaged.

This replacement tray catches and channels water under the refrigerator to prevent leaks and allow proper evaporation. It restores proper drainage and helps avoid standing water that can cause odors or damage. What it does

• Collects defrost and condensate water from the evaporator area to prevent puddling under the cabinet
• Directs water toward the evaporator/drain system so it can evaporate safely
• Helps keep the refrigerator floor and surrounding cabinetry dry
• Stops common symptoms like water pooling beneath the unit or musty smells from standing water

• One replacement tray

• Disconnect power to the appliance before any service
• Remove lower kick panel or shelves as required to access the tray; allow any standing water to drain into a bucket
• Inspect mounting location and drain channel for debris; clean before installing the new tray
• Seat the tray fully and restore panels; plug in and check for proper drainage during the next defrost cycle

This support bracket holds and secures a refrigerator component in place to prevent sagging, misalignment, or noise. It restores proper fit and stable operation so drawers, shelves or panels sit correctly and move smoothly. What it does

• Provides structural support for a refrigerator interior component so it stays aligned.
• Prevents sagging, binding or rubbing that can cause noise or hinder drawer/shelf movement.
• Restores secure mounting after a cracked or broken support causes instability.
• Helps maintain correct spacing to prevent interference with adjacent parts.

• High-level replacement — remove the damaged support and fasten the new bracket in the same location using existing mounting points.
• Use basic hand tools; keep fasteners and any clips removed during disassembly for re-use if undamaged.
• Disconnect power or follow manufacturer safety guidance if working near electrical components or lights.
• If mounting points are damaged or stripped, inspect surrounding parts; additional repairs may be required.