Frigidaire Grille

The Kickplate Grille is an OEM part for Frigidaire refrigerators. It is a decorative and functional panel located at the base of the refrigerator, designed to provide ventilation and airflow access to the compressor and condenser coils behind it.

Causes of a damaged Kickplate Grille can include dents or physical impacts from objects striking the base, discoloration or warping from heat exposure, and general wear over time.

Symptoms that may indicate a need to replace the Kickplate Grille include:

• Visible cracks, dents, or other damage
• Restricted or blocked airflow, leading to poor ventilation
• Difficulty removing or reinstalling the grille panel properly
• Discoloration or fading that clashes with the appliance's aesthetic

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Vent Trim is an OEM part for Frigidaire ranges. This part frames and supports the oven's ventilation system, ensuring proper heat dispersal and maintaining the aesthetic integration of the range within the kitchen setup.  

Common causes for vent trim issues include physical impacts during cleaning or use, thermal deformation from continuous exposure to high temperatures, and general wear and tear over time.  

Symptoms of failing Vent Trim include:

• Loose or ill-fitting trim that may not stay in place
• Visible damage such as cracks or warping due to heat exposure
• Increased heat retention or abnormal heat outside the oven
• Aesthetic discrepancies that impact the overall look of the kitchen

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Kickplate Grille is an OEM part for Frigidaire refrigerators. It is positioned at the bottom of the refrigerator, serving both aesthetic and functional purposes by covering the machinery and components located there, while also facilitating proper airflow to these parts to prevent overheating.

Causes of a bad Kickplate Grille can include physical damage such as cracks, warping, or breakage, often resulting from accidental impacts or general wear and tear. 

Symptoms of a bad Kickplate Grille include:

• Noticeable gaps or looseness in the grille's fit against the refrigerator frame
• Increased operational noise due to insufficient cooling of internal components
• Visual unappeal due to damage or discoloration

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Color: Grey

GRILLE/KICKPLATE

This replacement Grille Assembly restores a clean, secure front cover for your appliance's vent/intake area. It helps protect internal components and maintain proper airflow while returning the unit to a finished, like-new appearance.

• Covers and protects the vent/intake opening at the front of the unit
• Helps maintain correct airflow through the appliance
• Replaces a cracked, warped, or missing grille that won't stay secured
• Can reduce rattling or vibration noises from broken tabs or a loose fit
• Restores the factory look and fit

• Disconnect power before servicing.
• Remove mounting screws/clips and support the grille while releasing tabs.
• Reuse existing hardware; align tabs and position the new grille, then secure.
• Tighten screws snugly—do not overtighten—and confirm proper alignment and clearance.

Color: White

This kickplate grille mounts along the bottom front of the appliance to cover the lower compartment while allowing ventilation. Replace a cracked or missing grille to restore a finished look and maintain proper airflow to the condenser area.

• Covers and protects the lower front opening and internal components from bumps and debris
• Vents the toe-kick area to help maintain proper airflow through the condenser section
• Restores a clean, finished appearance at the base of the unit
• Common signs it's time to replace: cracked or broken grille, warped or missing piece, won't stay attached, rattling at the bottom front

• Disconnect power before servicing
• Remove the existing grille by releasing clips or removing screws as applicable
• Align the new grille with the mounting points; press or fasten in place and keep vent slots clear
• Restore power and check that the grille is secure and unobstructed

GRILLE/KICKPLATE

This kickplate grille mounts across the bottom front of the refrigerator. It restores a finished look and helps protect the machine compartment while allowing proper airflow through the condenser area.

• Covers the lower front opening to hide and shield internal components
• Vents air to support proper condenser airflow
• Replaces a damaged, cracked, or missing kickplate
• Common symptoms: broken tabs, grille won't stay attached, visible damage, missing piece

• Disconnect power before servicing
• Open doors to clear the grille; remove the old piece by releasing clips or removing screws
• Align the new grille with the mounting points and snap or fasten into place
• Ensure the grille sits evenly and doesn't interfere with door swing or airflow

This refrigerator kickplate grille mounts across the lower front of the cabinet to cover the machine compartment while allowing proper airflow. Replacing a broken or missing grille restores a clean finish and helps keep debris away from internal components.

• Covers the lower opening and helps shield the condenser area from bumps and debris
• Helps direct air through the base for proper ventilation
• Restores a clean, finished appearance across the bottom front
• Typical symptoms: cracked or scuffed grille, broken mounting tabs, loose or won't stay attached, missing

• Disconnect power and wear work gloves to avoid sharp edges
• Open doors; on many models, pull the grille straight out to release spring clips. If screws are used, remove them from the base rail
• Align tabs/clips and snap or fasten the grille into place
• The grille is secure and clear of door swing and air inlets

The Grille/kickplate is an OEM replacement part for Frigidaire refrigerators. It sits at the base of the refrigerator, covering the vents and providing a finished look. The grille/kickplate regulates air flow from the vents and directs it appropriately within the refrigerator compartment.

Causes of a bad grille/kickplate can include damage or cracks that impair its function, or wear and tear over time that degrades its fit and finish. 

Symptoms of a bad grille/kickplate include:

• Excessive dust buildup inside the refrigerator 
• Unbalanced or uneven air flow causing temperature fluctuations
• Cool air leaking out of the bottom vents
• The grille no longer fitting securely in place

This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This lower kickplate grille covers the refrigerator's toe-kick opening to protect components and finish the appliance's front. It restores appearance and maintains proper airflow through the cabinet bottom. What it does:

• Covers and protects the lower front area and components behind the toe kick
• Helps direct airflow under the cabinet where condenser/venting passages are located
• Replaces cracked, broken, bent, or missing lower grille pieces that leave the opening exposed
• Restores a finished look to the appliance front

• One lower kickplate grille

• Disconnect power to the appliance before starting any work
• Remove the old kickplate by releasing retained clips or fasteners, then align and secure the replacement
• Use gentle pressure to avoid bending the grille or damaging adjacent finishes
• Replace with OEM-specified hardware

This grille assembly replaces a damaged or missing vent trim to restore a clean, finished appearance and help direct airflow. It snaps or screws into place for a secure fit and visible cosmetic repair. What it does:

• Covers and protects the vent/air opening while improving the appliance's appearance
• Helps channel airflow from the vent area for proper exhaust or intake
• Prevents large debris from entering the vent opening and interfering with components
• Fixes symptoms such as cracked, broken, loose, or missing front/vent trim

• Disconnect power to the appliance before attempting removal or installation.
• Most installations require removing a few screws or releasing retention clips; keep fasteners for reuse.
• Handle carefully to avoid scratching the finish; align tabs or screw holes before tightening.

This lower front grille/kickplate replaces a damaged or missing kickplate to restore your appliance's appearance and protect the lower front panel. Durable black finish matches factory styling for a clean, finished look. What it does:

• Covers and protects the appliance's lower front opening and underlying components
• Restores cosmetic appearance if the original is dented, cracked, scratched, or missing
• Helps keep pets and objects from contacting components behind the panel
• Provides the factory look and fit for a seamless exterior

• Disconnect power to the appliance before beginning any service
• Typically fastens with retaining tabs and/or screws; align tabs and snap or secure as needed
• Use basic hand tools and protect surrounding surfaces during removal/installation
• Inspect and replace clips for a secure fit