Frigidaire Wall Oven Control Board

This electronic oven control board is the brain of your range or wall oven. Replacing a failed board restores the display and keypad response and allows the appliance to heat and run bake/broil cycles reliably again.

• Controls relays for bake and broil circuits
• Uses oven sensor feedback to regulate and maintain temperature
• Powers the time/temperature display and reads keypad inputs
• Common symptoms: blank or erratic display, unresponsive buttons, F-code errors, oven won't heat or shuts off mid-cycle

• Disconnect power at the breaker before servicing; allow the appliance to cool
• Static-sensitive component—handle by the edges and avoid touching circuitry
• Note/photograph wire locations; transfer connectors one at a time to the new board
• Mount the board in the control panel, secure connections, restore power, and test

The Frigidaire Range Control is an OEM component specifically designed for Frigidaire ranges. Located on the control panel, the range control houses all interactive buttons and knobs to operate the cooktop burners and oven. 

Causes of failure include damage from excess moisture, cracks developing from repeated tightening/loosening of knobs, or wear of electronic switches impacting responses.

Symptoms of a bad range control include:

• Unresponsive or inaccurate oven/stovetop controls  
• Inability to power on or adjust temperatures
• Faulty burners failing to ignite or flame improperly
• Loose, damaged, or missing knobs hindering the use

This OEM component is also compatible with Crosley, RV, and some Kenmore-branded ranges and ensures a straightforward repair experience.

The Control Board is an OEM part for Frigidaire ranges. As the central processing unit, this electronic board works diligently behind the scenes to operate all cooktop, oven, and control features through integrated circuits and software programming. Proper board functioning is vital for commanding reliable and precise appliance performance.

Causes of failure can involve power fluctuations over the long lifespan of the range, manufacturing errors in a small percentage of units, or physical damage to sensitive board components. 

Symptoms of a faulty control board include:

• Inability to ignite oven or cooktop burners despite efforts to reset  
• Lights, timers, or touch controls becoming totally unresponsive
• Failure to advance through cooking cycles or modes 
• Strange buzzing or clicking noises localized inside the control panel area

Replace with this genuine Frigidaire replacement board to regain complete functionality and avoid further diagnostic hassle. Compatible with some Electrolux, Jenn-Air, and Kenmore ranges as well. 
 

The Main Control Board is an OEM part for Frigidaire ranges. As the central processing unit, it coordinates bake/broil elements, lights, timers and sensory systems. Located inside the control panel area, this board continuously monitors range functions and relays information to the control display.

Causes can be splash or spill damage, power fluctuations over time, or inherent component failures due to age and usage. With proper replacement, full range functionality is restored.

Symptoms of a bad control board include:

• Knobs or buttons not working on the control panel
• Elements failing to heat properly
• Erratic temperature display readings
• Inability to preheat or maintain set oven temperatures
• Control locks that prevent range operation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Controller is an OEM replacement part for Frigidaire ovens. It acts as the brain of the oven, managing and regulating various functions such as temperature control, timer operations, and user interface.

Symptoms of a bad controller include:

• Oven not heating or maintaining proper temperature
• Display or control panel not functioning correctly
• Specific cooking modes or features not working as intended
• Error codes or warning lights indicating a controller issue

Causes of a bad controller can include electrical faults, power surges, or component failure due to age or excessive heat exposure. Faulty wiring connections or damage to the circuit board can also lead to controller malfunctions.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore oven models.

The Control Board is an OEM component specifically designed for Frigidaire ranges. It plays a crucial role in regulating and monitoring the various electrical functions of the range, such as the oven bake/broil elements, ignition system, temperature display, and timer functions.

Symptoms of a bad control board include issues like:

• The oven not heating up or baking/broiling unevenly
• Electrical components like the display or controls malfunctioning
• Error codes appearing on the display
• Unresponsive or inaccurate temperature and time settings

This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This OEM part is a relay control board for ovens. An oven relay control board is a circuit board that receives signals from the main oven control board. The relay control board then relays the signal to regulate the oven's essential functions. Over time, a relay control board can become overworked. If the oven is no longer turning on, heating properly, or regulating its temperature, it might be time for a new relay board. Luckily, replacing this part is not a difficult process. To replace the relay board, make sure the oven is unplugged. Gain access to the upper back panel on the back of the range and remove the screws. Once the panel is removed access the relay board and remove the wire harness as well as any individual wires attached to the old board. Make sure to take note of the orientation of the wires. Replug the wires into their correct terminals on the new board and snap the new board back in place. Resecure the upper back panel.This genuine replacement part is sold individually and is compatible with Frigidaire, Electrolux, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore brand ovens.

This electronic oven control board manages the bake/broil circuits and the clock/timer display. Replacing a failed board restores accurate temperature control and responsive keypad/display operation so your range can heat and time reliably again. What it does:

• Regulates power to the bake and broil elements based on temperature sensor feedback
• Interprets keypad inputs and drives the digital clock/timer display and alerts
• Controls oven relays for preheat, maintain-temp, and timed-cook functions
• Common failure symptoms include: no heat or intermittent heating, blank or unresponsive display, beeping/error indications, or oven that won't shut off

• 1 electronic control board

• Disconnect power at the breaker before servicing; verify no voltage is present
• Handle the board by the edges and use ESD protection to avoid static damage
• Note/photograph wire locations; transfer any mounting hardware or overlay from the original as applicable
• After installation, restore power, set the clock, and test all oven modes

This replacement clock is the electronic control that manages the time display and timer functions on compatible units—and on many models, it also coordinates oven operation. Restore a readable display and dependable controls for everyday cooking.

• Displays time-of-day and runs the kitchen timer
• Interfaces with the keypad; may switch bake/broil relays on applicable models
• Common symptoms: blank, dim, or flickering display; persistent beeping/error codes
• Common symptoms: unresponsive buttons, timer issues, or oven won't start/heat

• Disconnect power at the breaker before servicing; do not work on live circuits
• Handle the control by the edges and use ESD precautions to avoid static damage
• Photograph wiring and move connectors one at a time to the new control
• Reassemble the control panel, restore power, and set the clock

This part is a relay control board that is manufactured by Frigidaire. This part is intended to replace a broken or faulty relay control board in various wall oven models.This part is critical for proper appliance functionality as it helps to regulate the oven elements via signals received from the main board. If this part is broken, the user may have trouble operating the oven, or the oven may not power on at all. The appliance should always be entirely disconnected from the power source before making a repair. It's recommended that work gloves are worn when attempting a repair or part replacement. As an authentic OEM replacement part, this relay control board is suitable for use with wall ovens that have been manufactured by Frigidaire, Electrolux, Gibson, and Kelvinator. This part is sold individually and is a genuine part made of high-quality, durable, non-corrosive materials.

This electronic oven control board governs bake/broil functions and the display for Frigidaire-made ranges. Replace it to restore oven heat, accurate temperature regulation, and responsive controls when the original control fails. What it does

• Controls power to the bake and broil element/igniter and times oven cycles
• Monitors the oven sensor and maintains the set temperature
• Receives keypad inputs and drives the clock/temperature display
• Common symptoms: oven won't heat or overheats, display dead/dim, unresponsive buttons, intermittent shutoff, or error code on the display

• 1 electronic control board

• Disconnect power at the breaker before servicing; verify no voltage at the range
• Access the control through the backguard/control panel; photograph wiring for reference
• Handle the board by the edges to avoid static damage; move connectors one at a time
• Transfer the existing keypad overlay/trim and any mounting hardware from the old board

The Control is an OEM part for Frigidaire ranges. It serves as the central control unit for the oven, allowing you to set and adjust cooking temperatures, timers, and other essential functions.

A bad oven control board can be caused by electrical issues, component failure, or damage due to power surges or other factors. When the control board becomes faulty, it can result in issues such as inaccurate temperature readings, unresponsive controls, or failure of the oven to heat up properly.

Symptoms of a bad control board include:

• Inaccurate temperature readings or inconsistent heating
• Unresponsive or malfunctioning control panel
• Failure of the oven to heat up or maintain desired temperature

Replace your faulty oven control board with this genuine OEM part to restore your range.
This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Control Board is an OEM part for Frigidaire ranges. It functions as the central processing unit, regulating essential cooking functions such as temperature settings, timer operation and convection modes.

Causes for failure can include moisture damage, normal component fatigue from frequent use or power fluctuations over time.

Symptoms of a faulty control board include:

• Inability to accurately set or maintain programmed oven temperatures
• Failures in heating elements, fans or other systems activating as expected
• Non-functional programming displays and timer features
• Erratic cycling or error codes appearing

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This electronic oven control board manages bake and broil functions and provides the clock/timer display. Replacing a failed control can restore accurate temperature regulation, reliable oven operation, and a readable time display.

• Regulates oven heating by controlling bake and broil relays based on temperature sensor input
• Powers elements or igniters to reach and hold set temperatures
• Displays clock, timer, and oven status/settings
• Common symptoms of failure: oven won't heat or overheats, blank or dim display, can't set temperature/timer, unresponsive controls, intermittent beeping

• Disconnect power at the breaker before servicing
• This is an ESD-sensitive board; handle by the edges and avoid touching components
• Photograph and label wire connectors; transfer connectors and any mounting hardware from the original control
• After installation, set the clock and run a test bake to verify operation

Electronic clock/timer control that mounts behind the control panel. It provides the time display and manages oven functions so you can set temperatures, modes, and the kitchen timer reliably from the keypad.

• Provides clock and kitchen timer display; accepts keypad inputs for bake, broil, and temperature settings
• Controls oven heating functions by commanding the appliance per selected mode and setpoint
• Common failure signs: blank or dim display, unresponsive buttons, error codes or repeated beeping
• Also result in the oven not starting or not heating even though the appliance has power

• Disconnect power at the breaker before servicing; this control carries line voltage
• Access is typically through the control panel area; photograph wire connections to aid reassembly
• Handle the board carefully and avoid static discharge; transfer any brackets or supports from the original
• After installation, restore power, set the clock, and verify all oven functions

The Relay Board is an OEM part for Frigidaire ranges. It is an electronic component that controls the operation of various range functions and components by directing electrical currents through a network of relays.

Causes of a bad relay board include failure of electronic components over time due to continuous use, component fatigue, water damage, or surges/spikes in electrical current.

Symptoms of a bad range relay board include:

• Inoperable or unreliable oven/range functions such as bake, broil, warm, etc.
• Issues with cooktop burner ignition or flame level control
• Inconsistent or inaccurate temperature readings
• Error codes or diagnostic trouble codes appearing

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.