General Electric Dishwasher Filter

The Fine Filter is an OEM part for GE dishwashers. It is designed to trap food particles and debris during the wash cycle, preventing them from recirculating onto the dishes and ensuring clean, spotless results.

Causes of a bad fine filter can include clogs from food particles, damage from sharp objects, or wear and tear over time. A compromised filter can lead to poor cleaning performance and potentially damage other components by allowing debris to circulate.

Symptoms of a bad Fine Filter include:

• Poor cleaning results with food particles left on dishes
• Increased noise during operation
• Water drainage issues
• Visible damage or clogging in the filter

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Sump Filter and Cover is an OEM part for GE dishwashers. It filters out food particles and debris from the water during the dishwashing cycle, preventing the particles from recirculating and depositing on dishes. The cover ensures that the filter stays in place and also aids in the proper flow of water through the dishwasher.

A well-functioning sump filter and cover are vital for maintaining the cleanliness and efficiency of your dishwasher. Over time, the filter can become clogged with food particles and debris, which can reduce the effectiveness of your dishwasher. 

Symptoms of a bad Sump Filter and Cover include:

• Poor cleaning results
• Visible debris on dishes after washing
• Water not draining properly
• Unusual noises during the dishwasher cycle

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This microfilter sits in the dishwasher sump to capture fine food particles so water recirculates cleanly. Replacing a torn or clogged filter can help restore wash performance and protect the pump and spray arms from debris.

• Screens out fine debris to keep recirculating wash water cleaner
• Helps prevent redepositing and spray-arm clogs
• Common signs include gritty residue on dishes, poor cleaning results, visible tears/warping, or a filter that won't lock securely

• Disconnect power at the breaker before servicing.
• Open the door and remove the lower rack.
• Twist to unlock and lift out the old filter; clear any debris from the sump (locking direction varies by model).
• Seat the new filter fully and rotate to lock; ensure it's flush and secure.

Cylindrical filter that helps trap sediment and debris to protect your appliance's internal components and maintain water flow. Replacing a worn filter restores filtration and helps prevent clogging-related performance issues. What it does:

• Captures sediment and particulates to reduce debris reaching valves, pumps, and dispensers.
• Helps maintain consistent water flow by preventing buildup in flow paths.
• Reduces risk of clogs that can cause noisy operation or degraded performance.
• Common symptom: reduced water flow or visible particles in water/dispensed liquids.

• Turn off power to the appliance and shut off the water supply before starting.
• Relieve pressure and drain water from the lines where applicable to avoid spills.
• Inspect and replace any worn O-rings or seals; ensure the filter seats properly.
• After installation, restore power/water and run a short cycle or check for leaks.

This filter display is the fridge dispenser indicator that shows filter status and replacement reminders so you know when to change the water filter. It restores visual filter alerts and helps keep your dispenser reminders working. What it does:

• Illuminates the filter status/light so you can see when a filter change is needed
• Communicates filter-change reminders to the user via the dispenser display
• Failsafe: a faulty display can leave the filter light blank, stay on continuously, or show incorrect status
• Works with the dispenser control to provide a visible filter-change indicator

• Disconnect power to the appliance before starting to avoid electrical shock
• Handle the display and connectors gently; unplug wiring harnesses before removing the assembly
• You may need to remove dispenser trim or the control housing to access the display

This in-line microfilter helps capture fine debris in the refrigerator water line to protect the dispenser and ice maker and maintain clearer ice and water flow. Designed as a replaceable plumbing safeguard inside the appliance water system. What it does:

• Filters small particulate debris from the refrigerator water line to help prevent clogs
• Helps reduce visible sediment in dispensed water and ice
• Protects downstream components like valves and ice makers from abrasive particles
• Helps restore normal water flow when line debris is causing reduced flow or intermittent dispensing

• One microfilter in-line assembly

• Turn off water supply and unplug the appliance before servicing
• Replace only with the exact part; ensure proper orientation and seating of push-fit connections
• Inspect O-rings and tubing for damage and replace if needed to prevent leaks

The Filter & Gasket Assembly is an OEM part for GE dishwashers. This part traps food particles and debris during the wash cycle, preventing them from redepositing on dishes or clogging the drain system. 

Causes of a bad Filter & Gasket Assembly can include wear and tear from regular use, accumulation of hard water minerals or detergents affecting the gasket's seal, and damage to the filter mesh that allows larger particles to pass through or clog the assembly.

Symptoms of a bad Filter & Gasket Assembly include:

• Poor cleaning performance, with food particles left on dishes after a cycle
• Water leakage around the dishwasher's base, indicating a compromised gasket
• Unpleasant odors from trapped food particles that are not properly filtered out

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.