General Electric Microwave Parts

This control panel assembly replaces the front user interface on compatible ranges, providing a stainless-steel surface and mounting for the keypad and display so oven controls function and look complete again. What it does:

• Replaces the appliance's front control surface and secures the keypad and display.
• Restores usable buttons and clear markings when the original panel is cracked, dented, or worn.
• Helps address unresponsive or intermittent button operation caused by a damaged or loose panel.
• Provides a finished stainless-steel appearance and proper mounting for internal control components.

• Disconnect power at the breaker before beginning work; verify the appliance is de-energized.
• Handle the panel and finish carefully to avoid scratches; use proper fasteners and gaskets as shown in the service diagram.
• Removal may require accessing internal panels or removing the oven door—follow the OEM service instructions.

Handle assembly replaces a damaged oven door handle to restore a secure, comfortable grip for opening and closing the door. Matches OEM fit to keep the door operating safely and reliably.

• Provides a sturdy grip for opening and closing the oven door
• Replaces cracked, loose, bent, or missing handles that affect safe access
• Restores proper mounting and alignment of the door handle for everyday use
• Fits OEM mounting points for a straight swap with the original part

• Always disconnect power and allow the appliance to cool before working on the door
• Handle installs using the door's existing fasteners; keep original screws or verify correct replacements

This thermostat cavity is the molded housing that holds the oven thermostat sensor in place, keeping the sensor positioned for accurate temperature sensing. Replaces a worn or cracked housing to help restore proper sensor alignment. What it does:

• Secures the thermostat sensor/tube so the oven can monitor internal temperature reliably
• Protects the sensor from direct contact with heat sources and food debris
• Helps maintain consistent sensor placement after panel removal or repairs
• Common symptom: oven temperature reads incorrectly or cycles improperly when the housing is damaged

• Disconnect power to the appliance before beginning any repair
• Requires removal of the control panel or rear access panel depending on model; keep fasteners organized
• Handle gently to avoid cracking the new housing; inspect surrounding clips or tabs and replace if broken

This suction guide positions and supports the appliance's suction component to help ensure proper fit and reliable operation. Replacing a damaged guide restores alignment so the suction assembly can work as intended. What it does:

• Holds and guides the suction component or cup into the correct position
• Prevents misalignment that can cause vibration, rubbing, or reduced suction performance
• Helps maintain a consistent seal where the suction component interfaces with the appliance
• Useful when the original guide is cracked, broken, or worn

• Disconnect power (and water, if applicable) before servicing the appliance
• Access may require removing an outer cover or access panel and a few fasteners
• Handle plastic parts carefully to avoid cracking during removal and installation

The Microwave Lever is an OEM part for GE built-in and over-the-range microwaves. This metal lever links to the door handle and activates the door switch when the handle is pulled open.

Causes of a bad lever can include wear from daily use over many years. Repeated opening and closing of the microwave door puts stress on the lever and surrounding components. 

Symptoms of a bad lever include:

• Power not disabling when door opened  
• Loose or improper connection to door handle
• Door not shutting or latching completely
• Delayed microwave engagement or shut-off

This GE part is also compatible with Hotpoint, RCA, and select Kenmore models.

This auxiliary cooktop holder is a replacement support bracket that helps keep the cooktop or burner assembly aligned and secure for stable, rattle-free operation. Restores proper positioning of components after wear or damage. What it does

• Supports and anchors the cooktop/burner assembly to prevent shifting during use
• Keeps burner and trim pieces aligned for even surface contact and safe operation
• Reduces rattling, vibration, and gaps between cooktop components
• Helps restore secure mounting after broken or worn original brackets

• Disconnect power (and gas, if applicable) before starting any repair
• Use proper hand tools; part secures with fasteners—retain and reinstall all screws
• Watch for sharp sheet-metal edges and wear safety gloves and eye protection

Grille assembly replaces the front vent and control-area trim on your range or oven, restoring a clean appearance and directing exhaust airflow. Ideal when the original grille is cracked, bent, loose, or missing. What it does:

• Covers the front vent/control area for a finished, factory look.
• Replaces cracked, dented, loose, or missing grille pieces that cause visible damage or rattling.
• Helps direct exhaust airflow out of the vent opening and keeps the area tidy.
• Uses the appliance's original mounting points for a direct replacement.

• Always disconnect power to the appliance before beginning any repairs.
• Installation typically requires removing the lower access panel or control trim to reach mounting screws/clips.
• Use common hand tools; handle the grille gently to avoid scratching the finish.

This evaporator fan motor assembly circulates cold air through the refrigerator compartment to help maintain even cooling and proper temperature control. Replacing a failed fan restores airflow and helps the appliance cool correctly. What it does:

• Moves air across the evaporator coil so the refrigerator/freezer can cool efficiently
• Commonly replaced when there is little or no airflow from the fresh-food or freezer section
• Can stop excessive frost build-up on the evaporator caused by poor circulation
• May reduce unusual noise if the original motor bearings have failed
• Helps prevent uneven temperatures that can cause food spoilage

• One evaporator fan motor assembly as shown

• Disconnect power to the appliance before starting any repair
• Access may require removing interior panels or the evaporator cover
• Handle the fan blades carefully to avoid bending or cracking; ensure proper blade seating on the motor shaft

This interior oven lamp provides bright, direct lighting inside the oven cavity so you can monitor cooking without opening the door. Direct replacement designed for compatible GE ovens and ranges. What it does:

• Lights the oven interior so you can check food without releasing heat
• Replaces a dim, flickering, or burned-out oven light
• Restores safe visibility when checking racks, pans, and broiling items
• Fits standard oven lamp sockets used in many GE appliances

• Always disconnect power to the appliance before replacing the lamp
• Allow the oven to cool completely to avoid burns
• Remove protective cover or lens per your owner's manual before swapping the bulb
• Hand-tighten the lamp; do not overtighten.

This Cover-Stirrer protects the microwave's stirrer assembly and helps direct microwave energy for more even cooking. It's a direct-replacement plastic cover that restores proper operation and prevents debris from reaching the stirrer. What it does:

• Shields the stirrer/fan area from food splatter and debris to prevent damage.
• Helps maintain proper microwave energy distribution so food heats more evenly.
• Prevents contact with moving stirrer components for safer operation.
• A cracked or missing cover can lead to uneven heating, noise, or arcing.

• One Cover-Stirrer

• Disconnect power to the appliance before servicing.
• Remove the microwave's inner components or cavity access panels to reach the stirrer area.
• Align and seat the cover securely over the stirrer assembly; do not force or overtighten.
• If the existing cover is damaged, replace it; inspect surrounding components for damage or wear.

This control panel assembly replaces the front user console on compatible GE ranges and ovens, restoring reliable button and display control for oven functions and temperature settings. It helps bring back normal operation when the console is unresponsive or buttons fail. What it does:

• Houses the user interface for oven controls, including key switches and display area
• Allows selection of bake, broil, timer and other cooking functions
• Restores responsive keypad/buttons and proper command signals to the range control
• Commonly used when buttons are unresponsive, display is dim/blank, or controls act intermittently

• One control panel assembly (console) as shown

• Disconnect power at the breaker before starting; risk of electrical shock if power remains connected
• Basic disassembly of the oven/range front bezel is usually required; handle the display and ribbon cables with care

This handle tapping screw secures an appliance's handle to its door or front panel. Replacing a missing or stripped screw restores a firm, safe grip and prevents a loose or rattling handle. What it does:

• Fastens the handle to the door or front panel
• Self-tapping design engages/cuts threads for a secure hold
• Replaces missing, rusted, or stripped handle screws
• Helps correct a loose, wobbly, or rattling handle

• One handle tapping screw

• Disconnect power before service; for gas ranges, also shut off gas
• Support the handle while removing/installing screws to avoid stressing glass or trim
• Start the screw by hand to avoid cross-threading; tighten snugly without overtightening
• Keep track of any decorative end caps or spacers for reassembly

This installation hardware kit provides the mounting fasteners and brackets needed to secure the appliance during installation for a stable, code-compliant fit. Use it to complete new installs or replace missing hardware. What it does:

• Provides the mounting fasteners and brackets used to secure the appliance to surrounding cabinetry or floor
• Prevents shifting, tilting or excessive vibration after installation
• Enables proper alignment and stable operation following service or replacement
• Restores missing or damaged installation hardware so the appliance installs correctly

• Follow the appliance installation instructions and local codes; use only the fasteners supplied or specified by the manufacturer
• Disconnect power to the appliance before performing any installation or service that requires moving the unit
• Use appropriate tools and safety gear; some installations may require two people to safely position and secure the appliance
• If the appliance requires model-specific brackets or shims, confirm fit with the model's installation instructions before final installation

A small replacement push-button spring that restores reliable button return and control feel on affected appliances. Replaces worn or broken button springs so controls snap back and operate more consistently. What it does:

• Provides tension behind a push button so the button returns to its original position after pressing
• Restores proper button feel and prevents buttons from sticking or remaining depressed
• Helps resolve intermittent or unresponsive control-button action caused by a weak or broken spring
• Used in push-button/control-panel assemblies where a compact compression spring is required

• Disconnect power to the appliance before accessing controls to reduce shock risk
• Remove the control panel or button assembly per your model's service instructions; keep small parts secure
• Note spring orientation and seating; use needle-nose pliers if needed to position the spring carefully

This magnetron thermostat assembly helps prevent magnetron overheating by opening the circuit when temperatures get too high, protecting microwave components and helping restore normal operation once cooled. Fits the OEM thermostat function for safe thermal control. What it does:

• Senses excessive magnetron temperature and interrupts power to prevent overheating
• Helps stop microwave heating when the magnetron runs too hot or thermal limits are exceeded
• Common symptom: microwave powers on but does not heat or intermittently fails to heat
• Restores normal operation after cooling if no other faults are present

• Disconnect power and fully discharge the high-voltage capacitor before servicing
• Replace only with the correct OEM thermostat assembly to ensure proper fit and safety
• Handle with care; avoid shorting contacts or damaging terminal connections

A replacement door latch assembly that secures the appliance door and allows the door to lock and unlock properly for normal operation and safety. Restores proper door closure and appliance cycling when the latch is faulty. What it does:

• Engages and holds the door closed so the appliance can operate and complete cycles
• Triggers the appliance's door switch/lock mechanism when closed
• Helps prevent water/heat escape by ensuring a tight door seal during use
• Common symptom: door won't stay closed, won't latch, or appliance won't start/cycle

• Disconnect power (and water if applicable) before servicing to avoid shock or injury
• Access usually requires removing the door or front panel; follow your model's service manual
• Keep screws and small parts organized; test latch operation before reassembling completely