General Electric Microwave Parts

This handle tapping screw secures an appliance's handle to its door or front panel. Replacing a missing or stripped screw restores a firm, safe grip and prevents a loose or rattling handle. What it does:

• Fastens the handle to the door or front panel
• Self-tapping design engages/cuts threads for a secure hold
• Replaces missing, rusted, or stripped handle screws
• Helps correct a loose, wobbly, or rattling handle

• One handle tapping screw

• Disconnect power before service; for gas ranges, also shut off gas
• Support the handle while removing/installing screws to avoid stressing glass or trim
• Start the screw by hand to avoid cross-threading; tighten snugly without overtightening
• Keep track of any decorative end caps or spacers for reassembly

This installation hardware kit provides the mounting fasteners and brackets needed to secure the appliance during installation for a stable, code-compliant fit. Use it to complete new installs or replace missing hardware. What it does:

• Provides the mounting fasteners and brackets used to secure the appliance to surrounding cabinetry or floor
• Prevents shifting, tilting or excessive vibration after installation
• Enables proper alignment and stable operation following service or replacement
• Restores missing or damaged installation hardware so the appliance installs correctly

• Follow the appliance installation instructions and local codes; use only the fasteners supplied or specified by the manufacturer
• Disconnect power to the appliance before performing any installation or service that requires moving the unit
• Use appropriate tools and safety gear; some installations may require two people to safely position and secure the appliance
• If the appliance requires model-specific brackets or shims, confirm fit with the model's installation instructions before final installation

A small replacement push-button spring that restores reliable button return and control feel on affected appliances. Replaces worn or broken button springs so controls snap back and operate more consistently. What it does:

• Provides tension behind a push button so the button returns to its original position after pressing
• Restores proper button feel and prevents buttons from sticking or remaining depressed
• Helps resolve intermittent or unresponsive control-button action caused by a weak or broken spring
• Used in push-button/control-panel assemblies where a compact compression spring is required

• Disconnect power to the appliance before accessing controls to reduce shock risk
• Remove the control panel or button assembly per your model's service instructions; keep small parts secure
• Note spring orientation and seating; use needle-nose pliers if needed to position the spring carefully

This magnetron thermostat assembly helps prevent magnetron overheating by opening the circuit when temperatures get too high, protecting microwave components and helping restore normal operation once cooled. Fits the OEM thermostat function for safe thermal control. What it does:

• Senses excessive magnetron temperature and interrupts power to prevent overheating
• Helps stop microwave heating when the magnetron runs too hot or thermal limits are exceeded
• Common symptom: microwave powers on but does not heat or intermittently fails to heat
• Restores normal operation after cooling if no other faults are present

• Disconnect power and fully discharge the high-voltage capacitor before servicing
• Replace only with the correct OEM thermostat assembly to ensure proper fit and safety
• Handle with care; avoid shorting contacts or damaging terminal connections

A replacement door latch assembly that secures the appliance door and allows the door to lock and unlock properly for normal operation and safety. Restores proper door closure and appliance cycling when the latch is faulty. What it does:

• Engages and holds the door closed so the appliance can operate and complete cycles
• Triggers the appliance's door switch/lock mechanism when closed
• Helps prevent water/heat escape by ensuring a tight door seal during use
• Common symptom: door won't stay closed, won't latch, or appliance won't start/cycle

• Disconnect power (and water if applicable) before servicing to avoid shock or injury
• Access usually requires removing the door or front panel; follow your model's service manual
• Keep screws and small parts organized; test latch operation before reassembling completely

This part is a control panel assembly that is used on a microwave unit. This particular control panel is white in color and features all of the buttons that control the appliance. It also features a digital display.In the event that any of the buttons on the control panel do not work, this part will need to be replaced. Over time and with use, the text on the buttons may begin to wear off due to normal wear and tear. If this is the case, this part can be replaced so that the text identifying the functions can be seen. It's imperative that the microwave is unplugged from the electrical outlet before attempting to replace this part.This specific control panel assembly is compatible with microwaves that are manufactured by General Electric. It is sold individually and sourced from the manufacturer.

This control panel assembly replaces the front console controls and trim to restore clear touch/key operation and a clean stainless-steel appearance. It provides the user interface and mounting surface for the range/oven control components. What it does

• Houses the touchpads/buttons and display window used to set oven functions and temperatures
• Restores responsive control input when worn, cracked, or cosmetically damaged
• Re-establishes a finished stainless-steel front for a consistent appearance
• Helps resolve intermittent or unresponsive control-panel behavior when the assembly is the faulty component

• One control panel assembly (stainless steel)

• High-level replacement; disconnect power at the breaker before starting to avoid shock
• Installation typically requires removing the oven/range door and trim to access mounting screws and connectors
• Handle wiring harness connections gently and match connector positions when reassembling

This ventilation motor circulates exhaust and cooling air inside your oven or range, helping maintain proper airflow for safe operation and consistent cooking performance. It replaces a worn or failed blower motor to restore ventilation. What it does:

• Spins the blower to move air through the appliance housing and vent channels
• Helps cool internal components and reduce overheating during use
• Restores proper oven exhaust and ventilation when the original motor is noisy or not running
• Can eliminate humming, grinding, or no-spin symptoms caused by a failed motor

• Disconnect power to the appliance before starting any repair
• Handle the motor and wiring carefully; match connector type and mounting orientation
• Some disassembly of the rear or bottom panel may be required

This main electronic control board assembly manages the refrigerator's core functions so the unit responds correctly to user inputs and cycles components for cooling and defrost. Replacing a failed board restores normal control and operation. What it does:

• Manages compressor, fans and defrost cycles by sending signals to subsystem components
• Interprets front-panel inputs and adjusts settings and modes
• Controls display/status indicators and error reporting for diagnostics
• Helps regulate cooling behavior when functioning correctly
• Commonly linked to symptoms like unresponsive controls, incorrect temperatures, or erratic cycles

• One main control board assembly

• Disconnect power to the appliance before starting to avoid shock or damage
• Handle the board by edges and avoid static discharge; use proper ESD precautions
• Verify connectors are fully seated and routed as originally installed; photograph wiring before disassembly
• After installation, restore power and confirm proper operation of controls, display and cooling functions

This gas flame sensor detects whether a burner's flame is present so the range/oven's gas valve and ignition control can operate safely. It helps restore reliable ignition and prevents the valve from staying open when no flame is detected. What it does:

• Senses the presence of a gas flame and signals the control to keep the valve open
• Helps prevent gas flow if a flame is not detected
• Can stop ignition or cause the oven/range not to heat when failing
• Commonly replaced when burners won't stay lit or control shows ignition-related errors

• One gas flame sensor

• Turn off electrical power and shut off the gas supply before servicing
• Handle the sensor and its connector carefully to avoid damage
• Reinstall in the exact position and orientation; loose connections can cause false faults

A white replacement control knob that restores reliable manual control for a range or cooktop. Fits on splined control shafts to make temperature and element selection easy and accurate. What it does:

• Replaces a cracked, melted, stripped or missing control knob for a range or cooktop
• Provides a secure grip for turning surface element or burner controls
• Restores clear indicator alignment for accurate setting selection
• Helps eliminate loose or wobbly control feel caused by worn knobs

• Disconnect power (or turn off gas) and ensure appliance is cool before servicing
• Match splines and push knob straight onto the control shaft until fully seated
• If the original used a retaining clip or screw, reuse that hardware; do not force or hammer
• If control shaft is damaged or knob does not seat properly, inspect the switch/shaft and replace as needed

This coupler is a direct-drive coupling that connects the appliance motor to the driven shaft, restoring power transfer so the appliance can operate normally. It's a small replacement part that fixes common drive-related faults. What it does:

• Transfers motor torque to the driven component so the appliance can run
• Stops slipping or loss of drive when the original coupler is worn or broken
• Can reduce grinding, clunking, or intermittent movement caused by a failed coupling
• Helps restore normal operation without replacing the motor or driven assembly

• One coupler

• Disconnect power before attempting any service to avoid electric shock
• Inspect surrounding components (shafts, fasteners, seals) for wear before reinstalling
• Use basic hand tools; keep small parts and fasteners secure during reassembly

This door lever is the user-access handle component that lets the appliance door open and latch reliably. It replaces a damaged or broken lever to restore normal door operation and safe access. What it does:

• Provides the handle/lever action needed to open and close the appliance door
• Restores a secure latch action when the original lever is cracked, worn, or broken
• Stops sticking or slipping that can prevent the door from opening smoothly
• Helps prevent further damage to the door assembly by replacing a compromised lever

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Basic hand tools typically required; access may require removing the door or inner panel
• Inspect surrounding trim and mounting points for damage; replace additional parts if worn

This control panel is the user console that houses the oven/range buttons and display, restoring normal operation and allowing program selection and status feedback. It replaces a cracked, unresponsive, or damaged front console. What it does:

• Provides the front keypad and display interface for programming temperatures, timers, and oven functions
• Restores responsive button input and clear status readouts when the original panel is cracked, worn, or non-functional
• Helps resolve issues where controls do not register presses or the display is obscured
• Works as the main user-access point for starting and stopping cycles and setting options

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Handle the panel carefully to avoid bending or damaging the display and connectors
• Some installations require removing the oven console trim and disconnecting wiring harnesses; keep screws and small parts organized

This run capacitor helps the appliance motor start and run smoothly by storing and releasing electrical energy. Replacing a worn capacitor can restore reliable motor operation and reduce abnormal motor noise or cycling. What it does:

• Provides the brief power boost motors need to start and maintain RPM
• Helps stabilize motor voltage and improve run efficiency under load
• Commonly linked to symptoms such as motors that hum but won't start, slow or intermittent motor operation, or unusual motor noise
• Reduces stress on motor windings that can lead to premature failure when functioning properly

• One motor capacitor

• Always disconnect power at the breaker or unplug the appliance before servicing
• Capacitors can hold a charge; discharge safely
• Observe proper polarity and mounting location during installation; secure wiring and connectors