General Electric Range Heating Element

This broil shield is the oven's rear cavity panel that protects the oven back and nearby components from direct broiler heat. It helps channel heat for safer broiling and prevents heat damage to internal parts. What it does:

• Deflects direct broiler heat away from the oven back wall and components
• Helps maintain proper broiling performance by directing heat toward food
• Reduces risk of heat-related damage, discoloration, or premature wear on internal oven parts
• Limits grease and debris contact with sensitive rear components

• Disconnect power (and gas supply on gas ovens) before servicing the oven
• Remove oven racks and, if required, the broil element to access the shield
• Handle edges carefully—metal parts can be sharp
• Keep hardware removed during disassembly; screw locations for reassembly

This dual bake element restores even, reliable heat in your range or wall oven's bake cycle. Replace a burned-out or damaged element to recover proper preheat times and consistent cooking performance.

• Produces heat during the Bake cycle to reach and maintain set temperature
• Works with the companion element to promote even baking results
• Replace if the oven won't heat, preheats slowly, or bakes unevenly
• Signs of failure include blisters, breaks, or a section that won't energize

• Disconnect power at the breaker before servicing; allow the oven to cool completely
• Remove racks, take out mounting screws, and gently pull the element forward
• Support and label wires to prevent them from retracting; transfer connections securely
• Reinstall element so it doesn't contact the cavity; restore power and test Bake

This bake element is the lower heating element inside the oven cavity. It supplies steady bottom heat during Bake cycles, helping the oven preheat properly and cook food evenly when the original element has failed.

• Provides the primary bottom heat during Bake mode
• Cycles with the oven control/thermostat to maintain set temperature
• Common failure symptoms: no heat in bake, very long preheat, uneven or undercooked results
• Visible damage may include blistering, cracks, or burned spots on the element sheath

• Disconnect power at the breaker and allow the oven to cool completely
• Remove racks; take out the element's mounting screws and gently pull the element forward to access the terminals
• Support and label wires; transfer them to the new element one at a time to avoid miswiring and prevent wires from slipping back
• Reinstall securely, restore power, and run a Bake test to verify operation

This bake unit is the oven's primary lower heating element that provides consistent radiant heat for baking and roasting. Replacing a worn or damaged element restores proper oven heating and helps produce even cooking results. What it does:

• Radiant-heats the oven cavity for baking and roasting
• Restores proper temperature recovery and cooking performance
• Stops issues like little or no heat, slow preheat, or uneven baking when the element is faulty
• Visible damage, breaks, or lack of glowing are common signs it needs replacement

• Disconnect power to the appliance at the breaker or unplug before servicing
• Allow the oven to cool completely before accessing the element
• Remove the faulty element by unscrewing mounting fasteners and disconnecting terminals; install the new unit in reverse order
• Verify secure electrical connections and test function after reconnecting power

This oven heating element provides the heat source for baking and roasting so your oven reaches and maintains cooking temperatures. It restores proper oven heat when the element is damaged or no longer heats evenly. What it does

• Generates heat for the oven cavity so food cooks and browns correctly
• Replaces a visibly broken, burned, or non-glowing bake element
• Helps resolve symptoms like no heating, slow heat-up, or uneven baking
• Works as the lower bake element in standard electric ovens

• One oven heating element

• Disconnect power to the range at the breaker before starting any work
• Installation typically requires removing the oven floor or rear panel and disconnecting terminal wires; keep track of any mounting screws
• Handle the element carefully to avoid bending or contaminating the surface

This hidden bake element provides the oven's primary lower heating source for baking and roasting. It restores consistent bake heat and is a direct-replacement part used in many GE electric ranges and wall ovens. What it does:

• Heats the oven cavity from the bottom for baking and roasting cycles
• Replaces a burnt-out or non-heating lower element to restore oven temperature
• Helps improve evenness of baking when the original element no longer reaches set temperature
• Commonly used when the oven won't bake or the lower area doesn't get hot

• One hidden bake heating element

• Disconnect power at the breaker or appliance plug before starting any work
• Allow the oven to cool completely and remove oven racks before accessing the element
• Element typically secures with mounting screws and two electrical terminals; support the element while removing/replacing to avoid stress on wires
• After installation, restore power and run a short bake cycle to verify operation

This convection element provides the oven's heating source for convection cooking, restoring even heat circulation and consistent baking results. It replaces a damaged or non-heating convection heating element to get your oven back to working condition. What it does:

• Heats the oven cavity to enable convection cooking and even heat circulation
• Replaces elements that are visibly burned, broken, or that no longer produce heat
• Helps resolve uneven baking or incomplete cooking when element failure is the cause
• Works with the oven's convection fan and controls to maintain set temperatures

• 1 convection element

• Disconnect power to the appliance at the breaker before beginning any repair
• Handle the element carefully; avoid bending or damaging terminals and mounting tabs
• Verify fit and terminal connections match the original part before final installation

This warm heating element provides the low-temperature heat needed for a warm drawer or warming cycle, restoring gentle, consistent warming performance for cooked food. Designed to match the OEM function and fit. What it does:

• Produces low, steady heat for warming drawers or warming oven functions
• Helps maintain safe serving temperature for cooked dishes
• Replaces a damaged, visibly burned, or no-heat element
• Addresses symptoms such as no warming, uneven or weak warming

• One heating element (warm) as shown

• Disconnect power to the appliance before starting any repair
• Handle element carefully to avoid bending or damaging terminals
• Verify correct wiring and secure connections; test function after reassembly