General Electric Range Burner & Related Parts

15K

This circuit board mounting bracket secures an electronic board or module inside the appliance. It prevents movement, vibration damage, and wiring interference so the component stays correctly positioned for reliable operation.

• Mounts and supports a small circuit board or module within the chassis
• Maintains proper spacing and alignment to reduce chafing or electrical short risks
• Replace if bent, cracked, or missing tabs, or if it no longer holds the board securely
• Common signs include a loose/rattling board, visible bracket damage, or intermittent operation when the panel is bumped

• Disconnect power at the breaker; shut off gas supply if applicable
• Remove the necessary access panel(s) to reach the board and bracket; note orientation and wiring
• Transfer the board/module to the new bracket and reinstall using existing hardware
• Watch for sharp metal edges; route wires to avoid pinching and verify clearances before restoring power

Approx 2-1/2 inches in diameter

18K Simmer

This small cooktop bracket secures designated components beneath the cooktop surface, keeping them properly positioned and stable. Replace a damaged or missing bracket to restore alignment and reduce movement or rattling during use.

• Provides mounting support for specific under-top components, per model design
• Helps maintain proper alignment and stability of cooktop parts
• Replace when visibly bent, cracked, or corroded

• Disconnect power; for gas models, also shut off gas and allow the unit to cool
• Remove surface components as required (grates/caps/heads for gas; elements/panels for electric) to access under the top
• Lift or remove the cooktop as directed in your model's service information and secure the new bracket with existing hardware
• Reassemble, verify alignment, and for gas units check for leaks if any gas connections were disturbed

Black. C Burner

This head burner main is the primary gas burner head used on compatible gas ranges to direct and distribute the flame for proper cooking. It replaces a damaged or corroded burner head to restore even heating performance. What it does:

• Directs gas to the cooktop for ignition and controlled flame distribution
• Helps maintain even heat across the cooking surface for consistent results
• Can resolve symptoms like uneven flame, visible damage, or poor ignition at the burner
• Works with the burner cap and valve assembly as part of the burner system

• Turn off gas supply and power to the appliance before starting any work
• Remove grates and burner caps to access the burner; follow OEM disassembly guidance
• Replace only with the exact part number to ensure proper fit and function

Approx 1-1/2 inches in diameter

This hot-surface bake oven ignitor lights the gas burner for the oven so it reaches and holds baking temperatures. Replaces a weak or failed ignitor to restore reliable oven heating and consistent cooking results. What it does:

• Heats until hot enough to ignite the oven's gas burner for bake operations
• Restores normal preheat times and consistent oven temperature when the ignitor is failing
• Helps eliminate symptoms such as oven not heating, very slow preheat, or burner not staying lit
• Works as the direct ignition source for the bake burner assembly

• One bake oven hot-surface ignitor (WB13K10013)

• Disconnect power to the appliance and shut off the gas supply before starting work
• Handle the ceramic/glass element carefully—it's fragile and can crack if dropped or touched with bare hands
• Verify correct replacement part number for your appliance and test for gas leaks after installation

This D simmer ring fits the cooktop burner to help control and focus the gas flame for low-heat cooking and simmering. It restores proper burner alignment and helps prevent uneven heating on compatible gas ranges. What it does:

• Centers and supports the burner cap so the flame burns evenly
• Narrows the flame for low-heat/simmer settings and gentler cooking
• Helps reduce hot spots and improves stove-to-pot heat transfer
• Resolves uneven or wandering flames when the original ring is warped or damaged

• Turn off all controls and ensure the range is completely cool before servicing
• Remove grate and burner cap, seat the simmer ring over the burner base, then replace cap and grate
• Inspect for cracks, warping, or heavy corrosion; replace if damaged
• If you smell gas or the flame remains abnormal after installation, stop use.

Black. H Burner

This oven burner assembly replaces a worn or damaged bake burner to restore reliable oven heating for gas ranges. Designed as a direct-fit assembly, it provides the burner tube and components needed for ignition and even baking performance. What it does

• Supplies the main bake flame for the oven cavity so the oven reaches and maintains cooking temperatures.
• Replaces cracked or corroded burner tubes that cause weak or no flame.
• Helps correct uneven heating or poor baking results linked to burner damage.
• Works with existing ignition and gas valve systems when properly installed.

• One complete oven burner assembly.

• Turn off gas supply and electrical power before beginning any service.
• Handle the burner and igniter carefully; avoid bending or damaging the tube or orifices.

This replacement burner griddle provides a flat stovetop cooking surface that restores even pan-to-burner contact for griddling and frying. It replaces worn, warped, or missing griddle surfaces so you can cook foods like pancakes and sandwiches properly. What it does:

• Covers two adjacent burners to create a larger, flat cooking surface
• Distributes heat from the range burners for griddling and searing
• Helps restore even cooking when the original griddle is warped or damaged
• Works with compatible gas/electric cooktop configurations that accept a removable griddle

• One burner griddle

• Ensure the range is turned OFF and fully cool before handling or installing
• Set the griddle into place over the designated burners, aligning edges so it sits flat and stable
• No wiring or tools typically required; follow the appliance owner's manual for safe placement and usage
• Do not use if warped, cracked, or if it interferes with burner flames or controls

This oven bake burner supplies the flame for the oven's baking and roasting functions, restoring even heating and reliable ignition. Use this part to replace a worn or damaged bake burner and help return your oven to working order. What it does:

• Directs and maintains the gas flame used for baking and roasting inside the oven cavity
• Helps restore consistent oven temperature and proper browning
• Commonly replaced when burner shows visible damage, uneven flame, or poor bake performance
• Works with the oven's ignition system to light the bake flame

• Turn off and disconnect gas supply and power before servicing
• Verify correct burner alignment and secure mounting for proper airflow and ignition
• Inspect and clean burner ports and surrounding areas; replace if warped, cracked, or excessively corroded
• Test for gas leaks after installation and before normal operation

This replacement burner griddle fits over a cooktop burner to provide a flat, heated surface for cooking foods like pancakes, eggs and sandwiches. It restores a level cooking surface when the original griddle is damaged or worn. What it does:

• Provides a flat, even surface for griddling and frying on the cooktop
• Improves heat contact for foods that need a broad, stable cooking area
• Replaces cracked, warped or heavily scratched griddles that interfere with cooking
• Helps prevent direct flame contact with small or delicate foods

• Ensure the range is completely cool and power/gas is turned off before handling.
• Lift old griddle straight up; align new griddle so it seats properly over burner supports.
• Do not force or bend the griddle; avoid using on damaged burners or supports.
• Clean with non-abrasive cleaners; follow appliance manufacturer cleaning guidance.

This replacement burner griddle provides a flat cooking surface that fits over your range burners so you can cook pancakes, eggs and other griddle-style foods evenly. It restores a level, usable griddle surface when the original is warped or damaged. What it does:

• Covers one or more burners to create a flat cooking area for griddle-style items
• Promotes even contact with cookware/food for consistent browning
• Replaces warped, rusted or damaged griddle surfaces that no longer sit flat
• Helps contain spills and splatters on the cooktop for easier cleanup

• One burner griddle

• Allow the range and old parts to fully cool before handling
• Place the griddle onto the cooktop so it sits flat and aligns with burner openings
• No special tools typically required; your owner's manual for model-specific guidance
• Clean with warm, soapy water and a non-abrasive pad; avoid harsh cleaners that can damage the finish