General Electric Range Hood Parts

This activated charcoal filter restores odor reduction for recirculating range hoods. Replacing a saturated filter helps your hood control cooking smells and maintain effective performance in non-ducted installations.

• Adsorbs cooking odors when the hood is set to recirculate (non-ducted)
• Helps maintain capture performance; replace when odor removal declines
• Common signs it's due: lingering odors, heavy discoloration, or musty smell when the fan runs
• Not washable; designed for periodic replacement only

• Disconnect power to the hood before servicing
• Remove the grease filter to access the charcoal filter location/retainer
• Seat the new filter fully and secure per your hood's design; follow any airflow markings if present
• Reinstall the grease filter, restore power, and test the fan

This hex nut secures components within the range or cooktop assembly, helping keep parts tight and aligned. Replace a missing, stripped, or corroded nut to restore a solid fit and reduce rattling or loosening during use.

• Provides threaded fastening to hold mating parts together securely
• Replaces worn, stripped, or rusted hardware that no longer tightens properly
• Can help resolve loose or wobbly components and rattling noises
• Built to match the original fastener for proper fit in compatible appliances

• Disconnect power and shut off gas before servicing
• Start threads by hand to avoid cross-threading; tighten only until snug with the appropriate wrench
• Note the order of any washers/spacers during removal to ensure correct reassembly

Includes 12 washers.

Color: metallic. It measures about 10 inches in diameter.

This motor/lamp switch is the user control for many GE range hoods. It turns the fan motor and hood light on and off, restoring reliable control when the original switch becomes worn, intermittent, or sticks.

• Provides on/off control for either the hood fan motor or the hood light, depending on model location
• Common symptoms: fan or light won't turn on, stays on, intermittent operation, or a loose/sticky rocker
• Restores reliable, positive switching of the selected circuit
• Direct-fit replacement designed for the original switch footprint

• Disconnect power at the breaker before servicing
• Remove filters and the control/trim panel to access the switch (procedure varies by model)
• Photograph or label wire positions; transfer one lead at a time to the new switch
• Seat the switch fully in its bracket, reassemble, restore power, and test operation

This charcoal filter removes cooking odors in appliances configured to recirculate air instead of venting outdoors. Replacing a saturated or damaged filter helps restore odor absorption and maintain effective airflow. What it does:

• Adsorbs cooking odors and some smoke in non-vented installations
• Helps maintain airflow and fan performance when replaced as the filter becomes saturated
• Common symptoms of a spent filter: lingering odors, reduced airflow, darkened or crumbling media
• Designed for recirculating setups; typically not used on externally vented installations

• Charcoal filter

• Disconnect power before service and allow the appliance to cool
• Open the front grille or bottom access panel and release any tabs or screws holding the old filter
• Install the new filter in the same orientation and secure it
• Wear gloves; nearby metal edges can be sharp

This control knob replaces a worn or missing knob on your range or cooktop. It attaches to the control stem so you can reliably select heat or temperature settings and restore smooth operation with a clean, finished look.

• Mounts on the control stem to turn the burner or oven control
• Restores positive engagement when the original knob is cracked, stripped, loose, or missing
• Helps ensure smooth turning and proper indexing of settings
• Common symptoms: knob slips or falls off, hard to turn, damaged or missing knob

• Disconnect power and, if applicable, shut off gas before servicing
• Pull the old knob straight off the control stem; avoid prying on the panel
• Align the new knob with the stem and press it on fully until seated
• Verify smooth operation and that the indicator aligns with settings

This replacement motor powers the blower in your ventilation unit, spinning the fan blade or wheel to move air through the housing and ductwork. Replace it when the original motor becomes noisy, stalls, or fails to start.

• Drives the fan blade/blower wheel to move air through the unit
• Restores proper airflow and ventilation performance
• Common symptoms: loud humming or grinding, won't start, slow/weak airflow, intermittent operation, overheating/shutting off
• Often needed when the shaft is seized or bearings are worn

• Disconnect power at the breaker before servicing
• Access the blower assembly; remove the grille or filters to reach the motor
• Note wire locations; transfer wiring, mounting hardware, and the fan blade/blower wheel from the old motor if applicable
• Ensure the blade/wheel spins freely before reassembly, then restore power to test

This knob assembly is a genuine OEM replacement part that is found on range hoods. The knob is used to turn the power off and on to the fan and light. This knob is made of durable plastic, but it may crack and break over time. If this happens, it isn't easy to turn the shaft to the off and position that powers the fan and light. When the knob is damaged, it should be removed and replaced with a new one. Tools are not required to remove and replace the knob. To start, disconnect the range hood from the outlet or turn off the breaker. Grasp it tightly and pull hard. The knob will pop off. Line the new knob up with the slot and push it in place. Restore the power to the range hood.This knob assembly is a black plastic molded part sold individually. It is designed for range hoods manufactured by General Electric.

Size: 10-32 GXTT FLP.595 S

This is a blower motor assembly intended for use with range hood fans. The blower motor assembly powers the fan that circulates air over the stove. With use, the blower motor assembly may malfunction or fail. When this part becomes damaged or stops functioning correctly, a replacement part is required to continue the effective use of the fan in the range hood.Signs that the blower motor assembly needs to be replaced include a fan that doesn't turn on or a fan that makes unusual sounds when operating. The replacement of the blower motor assembly is simple. Disconnect the range from its power source before starting the disassembly of the appliance. Wear gloves for protection. A screwdriver and a nut driver are necessary to complete the repair. The blower motor assembly is located inside the range hood. Lower the fan unit, disconnect the old blower motor and connect wires to the new motor for installation.This blower motor assembly is a genuine OEM replacement part. It is sold as an individual piece. The blower motor assembly is made of durable materials. It can be installed in several different models of ranges. The blower motor assembly is compatible with appliances produced by General Electric, RCA, and Hotpoint.

This replacement light bulb restores illumination in your microwave, making it easier to see food and controls during use. Installing a new bulb brings back dependable lighting for the cavity or cooktop area, depending on your model. What it does:

• Supplies light when the appliance calls for it
• Improves visibility to monitor cooking progress and the work area
• Typical symptoms: no light, dim or flickering light, intermittent operation, blackened or broken bulb
• Normal wear item that eventually burns out and needs replacement

• Includes 1 light bulb

• Disconnect power at the outlet or breaker before servicing
• Allow the old bulb and surrounding area to cool before handling
• Remove the lens or access cover per your model's manual; install the new bulb fully seated without forcing
• Handle by the base and keep oils off the glass; use only the bulb type and wattage specified for your model

This is a genuine OEM replacement grease filter for use on cooktops. The air filter is used during cooking to filter smoke, grease, and other air contaminants from the air. When food is overheated, and smoke fills the kitchen, the air filter will pull the smoke from the air through the filter and out the exhaust. This helps to keep the air in the house odor and smoke-free. Odors can alter the way food tastes, so keeping the air and grease filter changed can help when serving food and how it is received. This filter also catches grease particles when cooking food in oil. These spatters will eventually clog the filter and necessitate the need to remove and replace it. If the filter is not removed, the air will not be able to circulate through it, and the filter will not work efficiently. Removal does not require tools. The filter is simply pulled out of the cavity and a new one placed in the cavity. The old filter should be discarded; this is not a filter that can be washed and reused. This filter is a black metal part that is sold individually. It is designed for stovetops and ranges manufactured by General Electric.

This charcoal filter set restores odor removal for ductless range hoods. In recirculating mode, the carbon media adsorbs cooking smells and smoke so your kitchen air stays fresher and the hood performs as intended.

• Traps odors and smoke during recirculating operation
• Helps maintain airflow and ventilation performance
• Replace when saturated or damaged to keep odor removal effective
• Common signs it's time: lingering cooking odors, reduced smoke capture, heavily discolored filter media

• Disconnect power and allow the hood and lamps to cool before service
• Remove grease filters to access the charcoal filters; release clips/tabs, swap in the new set
• Seat filters securely; align any arrows or tabs as marked
• Charcoal filters are not washable—replace when saturated

This grease filter traps airborne grease and cooking particles before they reach the blower and ductwork. Replacing a saturated or damaged filter helps restore vent performance, reduce lingering odors and smoke, and protect the ventilation system from buildup.

• Captures grease and particulates from cooktop exhaust to keep the vent path cleaner
• Helps maintain proper airflow and smoke/steam capture
• Common replacement signs: weak suction, visible saturation, tears/warping, or sagging

• Disconnect power and allow the appliance and filter area to cool before starting
• Open the filter panel/grille; support the filter while releasing tabs or latches
• Note orientation and seating; install the new filter securely without bending it
• Do not operate the vent without a grease filter; test fan operation after installation

This replacement screw secures appliance components so panels, brackets, and trim stay tight and aligned. Use it to replace a missing, stripped, or rusted fastener and restore a solid, rattle-free fit in the affected assembly.

• Fastens parts to the chassis/frame or mounting brackets
• Replaces lost, damaged, or corroded hardware
• Can help address loose or vibrating panels and minor misalignment
• Maintains a secure attachment during normal operation

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Match the screw to the original location and reuse any clips or washers if present
• Start threading by hand to avoid cross-threading; tighten snugly without overtightening
• Repair/replace damaged receiving threads or clip for proper hold