General Electric Range Tube Or Fitting

This formed gas tube routes fuel to the front surface-burner section on select gas ranges and cooktops. Replacing a damaged or clogged tube restores proper gas flow and reliable ignition to the front burners.

• Distributes gas from the supply/manifold to the front row of surface burners
• Helps address front burners not lighting, weak/uneven flame, or gas odor when the original tube is damaged or obstructed
• Maintains factory routing and clearances under the cooktop
• Direct-fit shape to match the original path and connections

• Shut off gas supply and power; allow the appliance to cool before servicing.
• Access tubing under the cooktop/rangetop; note routing and orientation before removal.
• Support fittings with two wrenches; avoid kinking or over-bending the new tube.
• After installation, perform a thorough leak check with an approved leak-detection solution before restoring gas and power.

This 7/16 replacement tube routes water inside the refrigerator to the ice maker or dispenser, restoring proper water flow and preventing leaks. It's a direct-fit replacement when the original tube is cracked, split, or clogged. What it does

• Carries water from the valve to the ice maker or dispenser line
• Replaces damaged, cracked, or kinked tubing that causes leaks
• Restores proper water flow when the dispenser or ice maker is starved or slow
• Helps stop visible water pooling or dripping inside the refrigerator

• One 7/16 replacement tube

• Turn off water supply and unplug the appliance before starting any work
• Confirm routing and secure connections match the original tube to avoid kinks
• Use proper fittings and a firm push or clamp connection; replace any damaged clips or seals

This right rear burner tube assembly routes gas to the right-rear cooktop burner so the burner lights and produces a steady flame. It restores correct gas flow to the right-rear burner on compatible ranges. What it does:

• Directs gas from the manifold to the right-rear burner for ignition
• Helps maintain an even, stable flame at the right-rear cooktop location
• Commonly replaced when the right-rear burner fails to light or has an irregular flame pattern
• Designed to fit as a single complete tube assembly for the right-rear burner

• Turn off gas supply and electrical power to the range before starting any work.
• Use caution when removing and installing gas components; replace gaskets or seals as needed.
• After installation, check all connections for leaks using a soap solution or a leak detector.

This elbow is the oven broil element elbow piece that directs and secures the broil element connection, helping restore proper broil function and alignment for safe, even heating in the oven cavity. What it does:

• Provides the correct elbow connection for the high broil element assembly
• Keeps the broil element positioned and secured for reliable heating
• Helps prevent misalignment that can cause uneven broiling or element contact
• Commonly replaced when the elbow is cracked, broken, or no longer holds the element

• Disconnect power to the appliance before any service to avoid shock hazard
• Handle the broil element and elbow carefully; wear gloves to protect against sharp edges
• Inspect surrounding mounting hardware and element for damage; replace additional parts if necessary

This left front tube assembly directs gas to the left-front cooktop burner for reliable ignition and steady flame control. It replaces a damaged or corroded tube to restore proper burner operation and safe cooking. What it does:

• Channels gas from the manifold to the left-front burner for consistent flame delivery
• Helps ensure correct burner ignition and stable heat output
• Replaces tubes that are bent, clogged, corroded, or leaking
• Useful when the left-front burner fails to light or burns unevenly

• One left front tube assembly

• Turn off gas supply and unplug the appliance before starting work
• Use appropriate hand tools; avoid forcing fittings to prevent damage
• Inspect nearby gaskets and fittings; replace if signs of wear or leakage

This right front tube assembly routes gas to the range's front-right burner, restoring proper gas flow for reliable ignition and flame control. Use when the front-right burner sputters, won't light, or produces uneven flame. What it does:

• Channels gas from the valve to the front-right burner for consistent combustion.
• Helps restore proper ignition when the front-right burner fails to light or burns poorly.
• Prevents gas leaks and misdirected flames when installed and sealed correctly.
• Matches factory shape and fittings to align with the front-right burner and valve.

• One right front tube assembly

• Turn off gas supply and disconnect power to the appliance before starting.
• Inspect mating fittings and gaskets; replace any damaged seals for a leak-free connection.
• Tighten connections to manufacturer torque recommendations; check for leaks with a soap solution after installation.