General Electric Room Air Conditioner Parts

This fuse protects your appliance's electrical circuit from overcurrent. When the fuse opens, power to the controls or components is interrupted. Replace a blown fuse to restore protection and help prevent additional circuit damage.

• Opens the circuit during a short or surge to protect wiring and electronics
• Signs of a blown fuse: appliance dead/no power, display or controls unresponsive, interior lights out
• Typically fails due to shorted components, pinched wiring, or a power spike
• Tests open (no continuity) with a meter when failed

• Disconnect power at the breaker or unplug before servicing; some models contain capacitors that can retain a charge.
• Access the fuse, verify it is open with a continuity test, and note its placement.
• Replace only with the exact fuse type and rating specified for your model; never bypass or upsize a fuse.
• If a replacement fuse blows again, locate and correct the underlying short before restoring power.

This electrical fuse protects your appliance's circuitry by opening the circuit when a fault or overload occurs. Replacing a blown fuse restores safe power flow and helps prevent further electrical damage. What it does:

• Protects the appliance's electrical circuit by interrupting power if an overcurrent condition occurs
• Stops power to control boards or motors when the original fuse has blown
• Common symptom: appliance has no power or will not start despite power at the outlet
• Common symptom: intermittent power or repeated fuse failure indicating an underlying fault

• One replacement fuse

• Disconnect power (unplug appliance or switch off circuit breaker) before servicing
• Verify the fuse is the correct OEM part number and is visibly blown before replacing
• Avoid touching live terminals; use insulated tools if needed
• If the new fuse blows again, stop and diagnose the underlying issue

This screw secures panels and components on compatible GE appliances to restore proper fit and reduce vibration. Use it to replace a lost or stripped fastener and keep covers and brackets held firmly in place. What it does:

• Fastens access panels, trim pieces, or internal brackets to maintain proper alignment
• Stops rattling or vibration caused by missing or loose screws
• Restores secure mounting after repair or parts replacement
• Works where the appliance requires a short sheet-metal or machine screw for fastening

• Disconnect power to the appliance before removing panels or performing repairs.
• Use the correct screwdriver or bit to avoid stripping the head.
• Hand-start the screw to ensure proper threading; tighten until snug but avoid over-torquing.

The Compressor Cushion is an OEM replacement part for GE refrigerators and air conditioners. It is designed to absorb vibrations and reduce noise generated by the compressor during operation. This cushion helps stabilize the compressor, ensuring smooth and quiet performance while protecting adjacent components from excessive wear.

Over time, compressor cushions can deteriorate due to heat, vibration, or regular wear and tear. A damaged or missing cushion may lead to increased noise, vibrations, and potential strain on the compressor and surrounding parts.

Symptoms of a bad or missing compressor cushion include:

• Excessive noise or vibrations during operation
• The compressor appearing loose or unstable
• Increased wear or damage to nearby components
• Reduced efficiency or uneven performance of the appliance

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This axial flow fan circulates air inside the appliance to help cool components and maintain proper ventilation. It replaces a worn or damaged blower wheel to restore airflow and reduce overheating risk. What it does:

• Moves air across coils or internal components to support cooling and ventilation.
• Helps prevent overheating and supports consistent appliance performance.
• Can reduce unusual temperature-related symptoms or poor cooling/airflow.
• Fits into the appliance's blower/motor assembly to restore proper airflow.

• Disconnect power to the appliance before starting any repair.
• Handle the fan blades carefully to avoid bending or damage.
• Verify proper seating on the motor shaft and secure fasteners per the appliance's service instructions.

This curtain assembly replaces a damaged or missing door trim curtain to restore proper fit and protect internal components while improving appearance. It's a direct-replacement component used on compatible GE appliances. What it does:

• Covers and protects internal door/frame openings to keep components shielded from debris and light
• Helps maintain correct door alignment and trim fit for smooth opening and closing
• Reduces rattling or vibrating noises caused by a loose or broken curtain piece
• Restores finished appearance when the original curtain is cracked, warped, or missing

• One curtain assembly

• Disconnect power to the appliance before starting any repair
• Installation typically requires removal of the outer door or trim panel and basic hand tools
• Handle parts carefully to avoid scratching trim or damaging clips; keep fasteners organized for reassembly