General Electric Room Air Conditioner Parts

AC not cooling consistently or won't turn on? This thermostat senses temperature and cycles the compressor. Simple continuity test diagnoses failures.

Traps dust and lint to maintain airflow and cooling performance in room air conditioners. Replace when damaged or missing to protect the evaporator coil.

This drive PWB supplies and regulates power to a driven component in your appliance, ensuring the motor receives the correct signals for smooth, reliable operation and restoring function when the original board fails.

• Provides regulated power and control signals to a motor or actuator
• Interfaces with the main control to manage operation
• On-board components help protect the circuit from faults
• Common symptoms of a failing board: motor won't run or is intermittent, only one speed works, erratic surging, or visible burn marks/clicking from the board area

• Disconnect power before servicing; verify no voltage is present
• Handle the board by the edges and avoid static discharge
• Photograph/document all connectors; transfer them one at a time
• Reinstall using original hardware; keep wiring clear of moving parts

Fix noisy operation or overheating in your room air conditioner. This axial flow fan circulates air across internal components to restore cooling.

Fix weak airflow or no cooling with this air conditioner fan motor. Restores proper air circulation when the unit runs but doesn't cool effectively.

Replacement remote control for your air conditioner. Order a new remote if yours is lost, damaged, chewed, or no longer responding to button presses.

If your air conditioner won't start or shuts down unexpectedly, a failed compressor overload protector is often the cause. This simple swap restores starts.

Fix weak airflow or a fan that won't spin with this air conditioner fan motor assembly. Restores proper cooling and air circulation in your unit.

Connector adapter for air conditioner ductwork. Joins compatible lines or fittings to restore secure connections. Replace when cracked, corroded, or damaged.

This is the main control board that manages the appliance's electronic functions and user interface, restoring normal control of cycles, displays, and timed operations. Replaces a failed or unresponsive control module to recover device control. What it does:

• Receives input from buttons/knobs and sends commands to motors, valves, heaters, and displays
• Controls timing, cycle selection, and system diagnostics for normal operation
• Resolves issues like unresponsive controls, no display, or incorrect cycle behavior
• Requires correct configuration and secure connections to function reliably

• 1 main control board (electronic control assembly)

• Disconnect power before service to avoid shock or damage
• Handle board by edges and avoid contact with components or circuitry
• Verify mounting, connectors, and wire routing match original before restoring power

Replacement power cord for room air conditioners. Restores electrical connection when original cord is damaged, frayed, cracked, or no longer reliable.

Molded air vent louver grille for air conditioners. Restores proper airflow routing and finished appearance. Replaces cracked, broken, or missing vent.

This thermistor is the refrigerator temperature sensor that helps the control board monitor and regulate cooling. Replacing a faulty sensor restores accurate temperature readings and consistent cooling performance. What it does:

• Measures internal refrigerator/freezer temperature and sends readings to the control board
• Helps the control board adjust compressor and fan operation for stable temperatures
• Can cause incorrect temperature display or uneven cooling when it fails
• Linked to excessive running, frequent defrost cycles, or poor cooling performance

• Disconnect power to the appliance before servicing to avoid shock or damage
• Handle the sensor and wiring harness carefully; avoid kinking or damaging the lead
• Ensure the connector is fully seated and any mounting clip or bracket is secured
• Some panel removal may be required; follow for access and reassembly

Replacement front panel for air conditioners. Covers the front cabinet and provides mounting for console and door trim. Ideal when cracked, dented, or worn.

This is a bearing assembly that supports the blower wheel shaft in a room air conditioner, allowing it to spin smoothly and quietly. It reduces friction on the rotating blower components that circulate cooled air into the room. Replace this bearing if the air conditioner produces grinding, squealing, or rattling noises during operation, or if the blower wheel wobbles and airflow has noticeably decreased.

Air conditioner not cooling or fan not running? This fan motor replacement restores proper airflow and cooling. Common fix for weak or noisy operation.