General Electric Range Knob, Dial & Button

Color: White

This knob assembly is a genuine OEM replacement part that is found on range hoods. The knob is used to turn the power off and on to the fan and light. This knob is made of durable plastic, but it may crack and break over time. If this happens, it isn't easy to turn the shaft to the off and position that powers the fan and light. When the knob is damaged, it should be removed and replaced with a new one. Tools are not required to remove and replace the knob. To start, disconnect the range hood from the outlet or turn off the breaker. Grasp it tightly and pull hard. The knob will pop off. Line the new knob up with the slot and push it in place. Restore the power to the range hood.This knob assembly is a black plastic molded part sold individually. It is designed for range hoods manufactured by General Electric.

This black control knob replaces a worn or missing knob on your cooking appliance, restoring smooth, accurate selection of burner or oven settings and a clean, consistent appearance.

• Attaches to the control valve or switch shaft to set heat levels
• Common fix for cracked, stripped, wobbly, or missing knobs
• Restores proper pointer alignment and positive feel when turning
• Helps ensure you can reliably return the control to OFF

• Allow the appliance to cool; disconnect power before servicing controls
• Pull the old knob straight off the shaft—do not pry against the panel
• Align the flat side of the insert with the shaft and press on firmly until fully seated
• The pointer aligns with OFF and turns smoothly; do not force if the shaft is damaged

Color: White

This replacement thermostat knob mounts on the oven control shaft so you can select baking and broiling temperatures. Swap a broken or stripped knob to restore smooth, reliable temperature selection and a clean, finished control panel. What it does:

• Attaches to the oven thermostat shaft to turn the control and choose a temperature
• Provides the hand grip/interface for turning the oven on/off and setting temperature
• Helps ensure positive engagement with the control; a worn knob may slip or spin freely
• Common symptoms: knob cracked, missing, loose, or won't turn the thermostat reliably

• One oven thermostat control knob

• Disconnect power to the appliance before servicing
• Pull the old knob straight off the thermostat shaft; do not pry sideways
• Align the new knob's flat/D-shaped recess with the shaft and press straight on until fully seated
• Verify orientation (OFF/indicator alignment) and confirm the knob turns the control without slipping

• Designed for the oven thermostat control (separate from surface burner knobs on many models)

The Knob Valve is an OEM part compatible with GE ranges. Precisely machined brass components regulate propane or natural gas flow through each control valve.

Causes of failure are often normal wear on precision valve internals restricting fuel intake over thousands of adjustment cycles. Cracks or contaminant buildup can occur from prolonged use.

Symptoms include:

• Burners failing to ignite consistently or at all  
• Inability to adjust/maintain proper flame height or temperature
• Fuel leaks discernible by smell around knob shafts

This GE replacement returns full functionality to fuel delivery. Compatible with select Hotpoint and RCA appliances as well, it prevents future repair costs. 

This surface burner valve knob assembly restores smooth, accurate control of your cooktop burner. Replace a cracked or slipping knob so you can turn the valve on/off and adjust heat with confidence.

• Attaches to the burner valve stem to control flow and heat level
• Replaces knobs that are cracked, stripped, loose, or missing
• Helps when the knob wobbles, spins on the shaft, or won't stay on
• Aligns with panel markings for clear setting selection

• Allow the appliance to cool; disconnect power and, if applicable, shut off gas
• Pull the old knob straight off the valve stem—do not twist the stem itself
• Align the new knob with the flat/splined shaft and press on firmly
• Turn through the full range to confirm smooth operation and full shutoff

The Knob is an OEM part for GE appliances designed for use with various stove and oven models. This knob allows users to control the settings of their appliance, whether adjusting the temperature of the oven or setting the heat level on the stove. 

Symptoms of a bad knob include:

• Difficulty turning or adjusting the settings
• Knob slipping or failing to engage with the control mechanism
•  Cracks or breakage that prevent proper function

Causes of knob deterioration often include mechanical stress from frequent use, exposure to heat, or damage from cleaning products or impacts.

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

This thermostat control knob replaces a worn or missing oven temperature selector. It attaches to the thermostat shaft so you can set the oven temperature again with a solid, positive feel and clear pointer alignment.

• Mounts on the thermostat shaft to select and adjust oven temperature settings
• Restores grip and control when the original knob is cracked, stripped, loose, or missing
• Helps ensure the control turns smoothly and the pointer lines up with the dial markings
• Freshens the appearance of the control panel

• Disconnect power and shut off gas supply before servicing
• Pull the old knob straight off; avoid bending the control shaft
• Align the flat/D-shaped opening with the shaft and press on firmly until fully seated
• Rotate through the full range to ensure smooth operation

This control knob assembly restores smooth, reliable burner control on your range or cooktop. Replace a cracked, stripped, or missing knob to adjust heat accurately and keep the control panel looking clean and consistent. What it does:

• Couples to the control valve or switch shaft so you can turn the burner on/off and set the heat level
• Replaces knobs that are cracked, stripped, loose, wobbly, or missing
• Helps ensure precise, repeatable adjustments during cooking
• Restores the original look and feel of the control panel

• Disconnect power; for gas appliances, also shut off the gas supply before servicing
• Pull the old knob straight off the control stem—do not force past the stop
• Align the new knob with the stem orientation and press firmly until fully seated
• Test for smooth operation before returning the appliance to service

Color: Black. Measures about 2 inches in diameter.

This replacement control knob restores a secure, accurate feel when setting temperatures on your cooktop or range. Swap out a worn or broken knob to regain smooth, dependable control of your appliance's settings. What it does:

• Attaches to the valve or switch stem to select Off and heat levels
• Restores positive grip and precise adjustment when turning the control
• Common symptoms: cracked or stripped knob, wobbling/loose feel, missing knob, difficulty adjusting heat
• Helps ensure consistent, repeatable burner control

• One control knob

• Disconnect power; shut off gas supply before servicing
• Pull the old knob straight off the stem—do not pry against the control panel
• Align the flat/D-shaped opening with the stem and press the new knob on fully in the Off position
• Test for smooth rotation and proper engagement

Replace a worn or missing surface burner knob to restore smooth, accurate heat control. This black knob presses onto the surface element switch shaft so you can turn the element on and select cooking temperatures with confidence.

• Attaches to the surface element switch shaft to control On/Off and heat levels
• Replaces knobs that are cracked, stripped, loose, or missing
• Helps when the knob slips, won't stay on, or is hard to set accurately
• Black finish maintains the original appearance

• Turn all controls Off and allow the cooktop to cool before servicing
• Pull the old knob straight off the switch shaft—do not twist or pry the shaft
• Align the new knob with the shaft and press straight on until fully seated
• Verify smooth rotation through the settings before use

Color: Matte Black It measures about 2 inches in diameter.

Replace a worn or missing knob and restore smooth, precise control of your cooktop. This black top burner control knob mounts on the surface burner valve stem, allowing reliable on/off operation and easy heat adjustment.

• Operates a surface/top burner by turning the control stem to set heat
• Ideal when the original knob is cracked, stripped, loose, hard to turn, or missing
• Restores proper feel and alignment when adjusting the burner
• Black finish matches the original appearance

• Allow the cooktop to cool and disconnect power before servicing
• Pull the old knob straight off the control/valve stem; align the new knob and press straight on
• Do not force—recheck stem orientation if the knob does not seat fully

This replacement control knob fits onto the range/cooktop infinite switch shaft to turn a surface element on/off and select heat levels. A fresh knob restores clear, positive control when the original is cracked, stripped, or missing. What it does:

• Interfaces with the infinite switch to control a surface element's power level
• Enables smooth on/off operation and precise heat selection
• Helps resolve issues like a loose or falling-off knob, difficulty turning the control, or inability to set temperature
• Refreshes worn or damaged control surfaces for easier readability and use

• 1 control knob

• Disconnect power at the breaker before servicing
• Pull the old knob straight off the switch shaft—do not pry against the panel
• Align the new knob with the shaft and push straight on until fully seated
• Reconnect power and verify proper burner operation through all settings