Skip to Content
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • 15 million satisfied customers 15 million satisfied customers
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store

Hotpoint Dishrack

Best Seller
Hot Point Upper Rack (Dishrack Assembly)
Genuine Ge part
By: Ge
Part Number: WD28X35779

Restore safe, organized loading on the top level. Replacing a damaged upper rack brings back smooth sliding, proper item placement, and dependable use without snagging or collapsed tines.

What it does

  • Holds cups, glasses, and bowls securely on the upper level
  • Helps prevent items from tipping or falling through the rack
  • Restores smooth slide-in/slide-out when rails and rollers are intact
  • Replaces racks with broken, rusty, or missing tines

What’s included
One upper rack assembly.

Install notes

  • Open the door, pull the rack to the stops, then release/remove end caps to slide the rack out
  • Seat the new rack on the rails and reinstall end caps—do not force
  • Transfer any clip-on accessories from the old rack if applicable
  • Run a quick rinse cycle to confirm smooth travel

Do-It-Yourself Stories from Customers like You Our dishwasher racks were rusted to the point of disintegrating from our well water which now has been fixed by a whole house ro system   Craig H. • Northport , FL • April 16, 2019

We had to order new racks by calling appliance parts pros. I gave them the model and serial number to order replacement racks with new hardware included. The racks came in 5 business days and I installed the new racks which were OEM. Fit perfect and the dishwasher runs like new. It was that easy. Read more

More
$81.95
Compare At:
$97.52
You Save:
$15.57

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Hot Point Lower Rack (Dishrack Assembly)
Genuine Ge part
By: Ge
Part Number: WD28X34744

Bring back smooth loading on the bottom level. This lower dishrack replaces bent or rusty racks so dishes sit securely and the rack glides cleanly without snagging or collapse.

What it does

  • Holds plates, bowls, and cookware securely on the lower level
  • Helps prevent items tipping or falling through broken tines
  • Restores smooth slide-in/slide-out when rails and rollers are intact
  • Replaces racks with rusted welds, missing sections, or warped frames

What’s included
One lower rack assembly.

Install notes

  • Open the door, pull the rack to the stops, remove end caps, and slide the old rack out
  • Seat the new rack on the rails and reinstall end caps—do not force
  • Transfer any clip-on accessories or tine clips from the old rack if reusable
  • Run a quick rinse to confirm smooth travel

Do-It-Yourself Stories from Customers like You Our dishwasher racks were rusted to the point of disintegrating from our well water which now has been fixed by a whole house ro system   Craig H. • Northport , FL • April 16, 2019

We had to order new racks by calling appliance parts pros. I gave them the model and serial number to order replacement racks with new hardware included. The racks came in 5 business days and I installed the new racks which were OEM. Fit perfect and the dishwasher runs like new. It was that easy. Read more

More
$92.47
Compare At:
$110.96
You Save:
$18.49

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Hot Point Dishwasher Rack Slide End Cap
Genuine Ge part
By: Ge
Part Number: WD12X10304

Secures the end of the dishwasher rack slide rail. Replace if cracked, broken, or missing to prevent racks from sliding off track or misaligning.

This part fixes the following symptoms
  • Door latch failure
See more...
Do-It-Yourself Stories from Customers like You Water would not drain   Paula M. • Crestview Hills , KY • November 14, 2014

Replaced the pump drain assembly Read more

More
$16.61
Compare At:
$24.73
You Save:
$8.12

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Hot Point Dishwasher Lower Dishrack Assembly
Genuine Ge part
By: Ge
Part Number: WD28X31819

Lower dishrack assembly for dishwasher bottom level. Holds plates, pots, and pans during wash cycles. Replace if rusted, cracked, or tines broken.

Do-It-Yourself Stories from Customers like You Deteriorating racks   Robert M. • Hallsville , MO • January 17, 2015

Replaced the upper and lower racks. AppliancePartsPro shipped the racks fast and they are a perfect fit. I think they're even a better, stronger design then the factory originals. Read more

More
$129.95
Compare At:
$154.64
You Save:
$24.69

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Hot Point Dishwasher Rack Rail End Cap
Genuine Ge part
By: Ge
Part Number: WD12X10426

Replacement end cap for dishwasher rack rails. Prevents upper or lower rack from sliding off when pulled out. Needed when cracked, broken, or missing.

Do-It-Yourself Stories from Customers like You Door latch was broken   Umesh K. • Pittsburgh , PA • February 17, 2017

Turn off the power , pull dishwasher and replaced the new one . It is working now Read more

More
$11.47
Compare At:
$13.76
You Save:
$2.29

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Hot Point Dishwasher Lower Rack Roller And Stud Assembly
Genuine Ge part
By: Ge
Part Number: WD12X27747

Lower rack roller and stud assembly supports smooth gliding of your dishwasher's bottom rack. Replace if roller is worn, cracked, or missing.

Do-It-Yourself Stories from Customers like You Missing roller on bottom rack   Bonnie S. • Loveland , CO • October 26, 2025

Ordered new roller w/stud assembly Read more

More
$9.48
Compare At:
$10.43
You Save:
$0.95

IN STOCK
Ships Today Guaranteed
Add to Cart
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store