Hotpoint Spray Arm & Related
Genuine Ge part
By: Ge
Part Number: WD22X33499
Replacement lower spray arm assembly for dishwashers. Installs under the upper dish rack to distribute water during wash cycles. Needed when cracked or broken.
Note: Due to manufacturer changes, the spray arm no longer has the metal tips on the end of the spray arm. Per the manufacturer, it is no longer required.
Do-It-Yourself Stories from Customers like You
Lower spray arm got caught on heating element John A. • Schwenksville , PA • June 14, 2025
Purchased new lower spray arm. counterclockwise wise turn to remove and clockwise turn to replace
Read more
More
$21.55
- Compare At:
-
$25.43
- You Save:
-
$3.88
Genuine Ge part
By: Ge
Part Number: WD22X33498
Replace your dishwasher's middle spray arm if it's cracked, broken, or worn. Snaps into place in the mid-rack section. Tool-free installation.
Do-It-Yourself Stories from Customers like You
The broken middle spray arm on dishwasher. Randy M. • Buda , TX • July 10, 2022
Ordered part and snapped it on.
Read more
More
$30.78
- Compare At:
-
$36.94
- You Save:
-
$6.16
Genuine Ge part
By: Ge
Part Number: WD22X10094
The Middle Conduit Assembly is an OEM part for GE dishwashers, designed to facilitate the proper routing and distribution of water during the wash cycle. This part ensures that water is evenly distributed to the middle spray arm, providing effective and efficient cleaning of dishes placed on the middle rack.
Causes of a bad middle conduit assembly can include clogs from food debris, mineral buildup from hard water, and physical damage due to regular use or improper loading of dishes. These issues can impede water flow, reducing the dishwasher’s cleaning efficiency.
Symptoms of a bad Middle Conduit Assembly include:
- Poor cleaning performance, especially with dishes on the middle rack
- Water not reaching the middle spray arm
- Unusual noise during the wash cycle, indicating a disruption in water flow
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken middle spray arm and mid conduit assembly. Tony P. • Manchester , NH • March 27, 2017
Ordered part, received it in two days. Parts were amazingly easy to install. Appliance works like new again! Thanks for a wonderful shopping (and repair) experience.
Read more
More
$31.95
- Compare At:
-
$38.02
- You Save:
-
$6.07
Genuine Ge part
By: Ge
Part Number: WD12X10244
Secures and rotates the lower spray arm inside your dishwasher tub. Replace if the mounting tab is broken, cracked, or won't hold the spray arm securely.
Do-It-Yourself Stories from Customers like You
Broken spray arm Robert F. • Port St Lucie , FL • September 20, 2014
I did not know how to remove the broken spray arm so when I muscled it out, the spray arm base broke. We ordered the replacement parts from appliance parts pros and received them within 2 days. I looked online to find out how to remove the spray arm base. I removed it be unscrewing the base, screwing the replacement base, and then snapping in the new spray arm. We tested the dishwasher and it worked just like it was new. Another new task learned and completed!!
Read more
More
$77.76
- Compare At:
-
$93.31
- You Save:
-
$15.55
Genuine Ge part
By: Ge
Part Number: WD22X10055
Replacement lower spray arm for dishwashers. Installs inside the tub and snaps or threads into the base. Replace if cracked, broken, or sections missing.
Do-It-Yourself Stories from Customers like You
Broken spray arm Robert F. • Port St Lucie , FL • September 20, 2014
I did not know how to remove the broken spray arm so when I muscled it out, the spray arm base broke. We ordered the replacement parts from appliance parts pros and received them within 2 days. I looked online to find out how to remove the spray arm base. I removed it be unscrewing the base, screwing the replacement base, and then snapping in the new spray arm. We tested the dishwasher and it worked just like it was new. Another new task learned and completed!!
Read more
More
$166.49
- Compare At:
-
$198.12
- You Save:
-
$31.63
Genuine Ge part
By: Ge
Part Number: WD22X10046
Center wash arm assembly for dishwashers. Mounts on the center rack area to spray water during wash cycles. Replace if holes are clogged or arm won't rotate.
Do-It-Yourself Stories from Customers like You
Middle spray arm was not rotating Glenn S. • Holly Springs , NC • February 22, 2015
The replacement of the arm took a total of 3 minutes, all I needed was a nut driver for the easy job, taking the old arm out and putting the new one in, exact replacement , I appreciate you getting the part out as fast as you did. It took an extra day because of the ice storm we had . That was ok. Thanks you .
Read more
More
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Ge part
By: Ge
Part Number: WD22X10047
Replaces a cracked, broken, or clogged lower spray arm in your dishwasher. Installs at the bottom of the tub. Needed when spray holes are blocked or damaged.
Do-It-Yourself Stories from Customers like You
Dishwasher was all gunned up with hard water residue and detergent residue Charles B. • Great Mills , MD • March 14, 2015
I replaced a few key parts that I couldn't clean properly, and were not spinning well in the dishwasher. Afterwards, it worked like new, and the cleaning power returned.
Read more
More
$114.95
- Compare At:
-
$136.79
- You Save:
-
$21.84
Genuine Ge part
By: Ge
Part Number: WD22X154
Lower spray arm assembly for dishwashers. Rotates to distribute water throughout the tub. Replace if tabs are broken, arm is cracked, or threads are stripped.
Do-It-Yourself Stories from Customers like You
The old ge dishwasher spray arm tabs had broken off Peter H. • Hinesburg , VT • June 29, 2014
The replacement arm arrived promptly. Removing the old spray arm hub was very difficult by hand, plumbers wrench, or adjustable wrench. However, by inserting a screwdriver trough the two opposite holes where the tabs had broken off, it is relatively easy to unscrew the old hub.
Read more
More
$45.95
- Compare At:
-
$55.14
- You Save:
-
$9.19
Genuine Ge part
By: Ge
Part Number: WD22X20688
The Hub is an OEM replacement part for GE dishwashers. It is the central mechanism which attaches to the tub and facilitates rotation of the upper spray arm above dishes.
Causes of a bad hub include wear from years of repeated rotation, accumulation of hard water scale deposits inside moving parts, or accidental impact damage. This reduces proper function over time.
Symptoms of a bad hub include:
- Loud clunking or grinding noises from the center mechanism
- Reduced cleaning performance on upper racks or portions of dishes
- Dishes showing water spots or soil in sections not adequately rinsed
- Inability to attach or move the upper spray arm assembly smoothly
This OEM GE hub replacement is also compatible with Crosley, and KitchenAid models.
More
$11.70
- Compare At:
-
$12.92
- You Save:
-
$1.22
Genuine Ge part
By: Ge
Part Number: WD28X10103
Replaces broken or cracked 3rd level spray arm assembly that mounts at the top of the tub. Includes mounting tabs and collar for secure installation.
Do-It-Yourself Stories from Customers like You
The top level (3rd level as called by ge/appliancepartspros) spray arm fell off Yuan S. • San Ramon , CA • June 27, 2014
There is a plastic "snapping" feature (Two plastic tabs that when pressed together can fit into the holes on the spray arm. Once in there, the tabs expands and keep the spray arm in place) that comes out of the top onto which the spray arm is attached to. That plastic piece broke and the spray arm fell off.
It wasn't clear how the snapping feature was attached to the top of the dishwasher at first. I was looking for a replacement for it and could not find it on any of the assembly diagram...
Read more
More
$34.93
- Compare At:
-
$79.84
- You Save:
-
$44.91
Genuine Ge part
By: Ge
Part Number: WD28X10367
Upper rack tower assembly for dishwashers. Mounts to the upper rack to support dishes and glassware. Replace if cracked, broken, or missing components.
More
$22.95
- Compare At:
-
$27.08
- You Save:
-
$4.13
Genuine Ge part
By: Ge
Part Number: WD35X10011
White dishwasher lower spray arm assembly with collapsible tower. Replaces cracked, broken, or damaged spray arms. Installs at bottom of tub.
Do-It-Yourself Stories from Customers like You
1 not draining properly 2 not cleaning properly 3 not filling properly 4 not running properly 5 sump and sump cap was filthy 6 James W. • San Diego , CA • March 19, 2017
1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve.
Parts $220 for Dishwasher
Estimated Labor $400.00
Labor $0.00
Parts $100.00 for Pullout Faucet
Estimated Labor $175.00
Labor $0.00
Read more
More
$53.95
- Compare At:
-
$64.74
- You Save:
-
$10.79
Out Of Stock
Usually ships within 4 - 14 days