Need Help?
Call
Water dispenser won't shut off or no water flowing? This inlet valve controls water to your ice maker and dispenser. DIY repair in 10-15 minutes.
I seared the web and found Appliance Parts Pros site and when I input my GE refrigerator model number I was able to do some diagnostics on their site. It was indicated from my research that the Water Inlet valve most likely was at fault for my problems. I ordered the replacement valve from them and they shipped the same day as the order and it arrived the next day, faster than I had expected. I viewed their video and it was very good at explaining what I had to do to replace the valve on my... Read more
Dishwasher not filling with water or fills slowly? The water inlet valve controls water flow into your dishwasher. Simple DIY repair, 30-60 minutes.
Pulled out the unit, found the inlet valve was leaking. Went on AppliancePartsPros.com and ordered a new valve. That was Saturday evening. Tuesday I got my part and installed it. Thanks for the fast delivery. Read more
The Solenoid and Bracket Assembly is an OEM replacement part for GE dishwashers. This component plays a role in controlling the flow of water during the dishwashing cycles, allowing for proper water distribution and efficient cleaning.
Symptoms that may indicate the need to replace the solenoid and bracket assembly include:
Causes of a faulty solenoid and bracket assembly can include normal wear and tear over time, electrical malfunctions, mineral buildup or debris obstructing the solenoid, or physical damage to the component.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.
Replaced the solenoid and bracket assembly Read more
Washer won't fill or leaks when off? A faulty water inlet valve causes filling issues or constant dripping. DIYers replace this in about 1 hour.
Ordered new valve assembly, part arrived 2-3 days, installed part same day it arrived. Some difficulty getting to the two screws holding it in due to small area to work. Once that was figured out, reinstall went very smoothly, total time about one hour. Probably saved a couple of hundred if I had to hire a plumber to fix it, plus the parts. Very satisfied with the service. Read more
Fix icemaker overflow or no water/ice issues with this water isolation valve kit. Controls water flow to your icemaker. DIY-friendly, 20-minute repair.
Replaced inlet valve assembly. Read more
Fix a leaking water valve or non-working ice maker and water dispenser. This dual inlet valve controls water flow to both systems. DIY-friendly repair.
To verify if you have a bad valve in the first place read on... I first pulled out the ice maker to remove all the frozen water including the inlet section which was a huge solid waterfall of ice. While it was out completely disconnected I cleaned/chipped out the freezer section ice puddle. I also completely melted the ice cubes and ice puddles off the ice maker at the fill bucket end in the sink with running water careful to not get water near the power cord area. I then put a tall plastic cup... Read more
Fix dishwasher not filling or H2O error codes with this water inlet valve assembly. Controls water flow into tub. Moderate DIY repair, about 1 hour.
Replaced the valve. Pretty easy job Read more
Fix a dishwasher that won't drain or keeps draining during fill. This solenoid armature controls the drain valve. DIY repair in about 45 minutes.
About a year ago my dishwasher during a cycle was emitting a horrible plastic burning smell. We stopped it mid-cycle, cleaned it out and tried to run a few more cycles after that and realized it wouldn't drain so it sat in my kitchen broken for a year. I finally got so fed up with washing dishes by hand that I took the whole dishwasher apart. Confirmed there were no blockages in any of the hoses etc. when it still didn't work I googled the problem, found this website and found that it must be... Read more
Ice maker not filling or water dispenser not working? This refrigerator water inlet valve controls water flow to both. DIY install in 10 minutes.
I replaced the water inlet valve. The toughest part was closing off the feed line while I waited for the valve to be delivered. The needle valve used to install the feed line wouldn't close completely. I ended up fabricating a plug from some parts from the hardware store. The mounting bracket on the new valve was completely different from the original, but it still mounted easily enough. The 1/4" plastic hose fitting was a different type from the original, but the hose fitted into it easily... Read more
Fix a dishwasher that won't drain completely with this piston and nut valve assembly. Simple DIY repair when water remains in tub after cycles.
It is very simple to fix. All the blogs recommend replacement of this part but do not explain why. This is a normally open check valve that permits the water from inside the dishwasher to drain out, either once it gets too high or just general splash. When the machine drains the pump comes on and the check valve closes. If the check valve is damaged or worn (like mine was) some of the water can pump back into the machine. So really, the problem is not that the machine will not drain but... Read more
Dishwasher not filling with water? A faulty water inlet valve is often the cause. This valve controls water flow into your dishwasher. 20-30 minute fix.
Removed the old one. ordered a new one from appliancepartspros.com on Thursday afternoon, had the part on my front porch by Friday afternoon and installed it the next Monday morning. After I determined the problem, actual time fixing was maybe 30 minutes. Read more
Washer won't fill, leaks after cycles, or has no hot water? The triple water valve controls fill, rinse, and dispenser flow. DIY fix in under 1 hour.
My husband fixed it, he took out the leaky valve and replaced it with the new valve, which we received in the mail from your company, which was only a short time after we ordered it. Thank you for being so prompt. Our washer is only a little over 2 years old and upon looking online, we found out this model has since been discontinued due to problems. The parts are no longer available from GE, so we were thrilled to find your company online which carried the part. It saved us a lot of money... Read more
Dishwasher not filling with water or leaking during cycles? The water inlet valve controls water flow. DIY-friendly repair, typically 10-30 minutes.
I took the inlet valve apart, found it was clogged with sediment, so I cleaned it and reinstalled it. Water was still not filing, so I figured the valve was sticking. I ordered a new valve,because $30 was a lot cheaper than a new dishwasher. I took out the old valve with two screws, and disconnected the supply line, the brass elbow, one hose, and a wiring harness. I reattached it in the same place, re-using the all the other parts, and once I turned the power and water back on, it worked as... Read more
Fix ice maker overfilling, leaking water lines, or no ice production. This water inlet valve assembly controls water flow to your ice maker and dispenser.
Replaced inlet valve and ice maker Read more
Note: This is the complete solenoid assembly kit. For armature & linkage assembly only, use WD1X1316.
The Solenoid Assembly is an OEM part for GE dishwashers. It plays a crucial role in controlling the flow of water into the dishwasher by activating or deactivating the drain valve. This assembly is essential for ensuring that the dishwasher fills and drains at the correct times during the wash cycle, which is pivotal for the overall efficiency and effectiveness of the appliance.
Common causes for a Solenoid Assembly to fail include wear and tear over time, mineral buildup from hard water, or electrical failures that prevent the solenoid from operating as intended.
Symptoms of a bad Solenoid Assembly include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Put in the new parts and now it does not leak anymore. Very simple Read more
The Triple Water Valve is an OEM part for GE washing machines. This part controls the flow of water into the washer, allowing for the precise mixing of hot, cold, and warm water necessary for different wash cycles.
Causes of a bad triple water valve can include mineral buildup or blockages from debris, electrical issues such as faulty solenoids, and wear and tear from frequent use.
Symptoms of a bad triple water valve include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered water inlet valve. Took all about 10 mins to change it solved the problem. Easy fix Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.