Husqvarna Blade

This adapter attaches the blade to the motor shaft and can ensure a secure fit for the size of the blade that you need. The adapter will hold the blade in place and allow it to rotate appropriately. Although this piece is made of metal, it can wear down with regular use over time and may need to be replaced. It could also become damaged, which would require a more immediate replacement. Either way, this genuine OEM blade adapter can provide a solution for compatible mowers. This blade adapter is reasonably simple to install, but always disconnect the spark plug before doing any work. The Craftsman blade adapter can be used as a replacement part on compatible lawnmowers models from Craftsman, Husqvarna, Poulan and Poulan Pro, Weed Eater, EHP, Yard Pro, Sears, Rally, and Roper.

The blades for a lawn mower are attached to the blade adapter and the spindle. It ensures that the blades are securely in place and that they will stay in place when mowing. It is not safe or effective to use a mower if there are issues with the adapter. Over time, many things could happen to the blade adapter that would require a replacement. In some cases, the adapter could be stripped, which would mean that the blades would then stop rotating properly. Damage from use and misuse can happen in some cases. Normal wear and tear will occur, as well, which can cause a blade to start vibrating and will cause problems with mowing. This metal replacement blade adapter is a genuine OEM part that will work for lawn mowers from several different brands. Compatible brands include Husqvarna, Jonsered, and Craftsman. Replacing the blade adapter will require a wrench.

This type of lawnmower blade is characterized by deeper curves on the ends, which create enough suction to circulate and expel the grass clippings into a bagger. It is designed to improve the way clippings are ejected out of the discharge chute. It also has larger wind wings that increase airflow. This helps prevent clogging when mowing wet or tall grass. Without a bagger, these blades put excess load on the engine and don't expel clippings as efficiently as low lift blades.  The wear and tear on a high lift blade are considerable, so there's a risk of using a dull blade without regular replacement. Blade erosion can happen over time due to debris, and the mower may offer noticeably less efficient performance when cutting grass. It is time to replace the blade if it has nicks and dents. For the average homeowner, a good rule of thumb is to replace the mower blades annually.  This part is compatible with specific models from Ariens, Craftsman, Husqvarna, Poulan, and Murray. It is an OEM part sourced directly from the manufacturer and is sold individually.

This mulching blade is a genuine Husqvarna part, sold individually. This mulching blade can be used as a replacement part in a lawn mower. The purpose of the mulching blade in a lawn mower is to chop grass clippings into mulch so that the mulch can be redistributed back into the lawn to keep it healthy.The mulching blade might be subject to damage from overuse and general wear and tear or as the result of a direct impact collision with a hard object. If the mulching blade is warped, dented, cracked, punctured, or otherwise damaged to the point that it cannot chop the fine grass clippings into mulch, the mulching blade should be removed and replaced by this genuine OEM replacement part. It is a simple replacement process that simply requires the user to swap out the old mulch blades for the new ones.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This mulching blade is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Jonsered, and Dixon.

This hi-lift blade is a genuine OEM replacement for select 48-inch deck lawn mowers. The blade is attached to the deck using a bolt. When the engine is powered and the blade is engaged, it will rotate to cut the grass. With regular use, the blade can become worn beyond the point of sharpening. It can also become nicked or damaged from hitting rocks or other debris. When the blade is damaged, it needs to be replaced promptly for safe operation and optimal cutting. This genuine part can provide the replacement for compatible mowers. This OEM blade is manufactured by Husqvarna and designed specifically to be used in select mowers from the brand. It can also be used in models from Weed Eater, Craftsman/Sears, Poulan and Poulan Pro, and Roper. This blade features a 5/8-inch center hole for attaching and features a two-in-one operation that does not offer mulching. A mulching blade can be purchased if that feature is desired. Be sure to disengage the spark plug before going near the blade and wear gloves for hand protection at all times.

This is a genuine OEM mulching blade sourced directly from the manufacturer; it is used on push mowers and riding lawn mowers. A mulching blade is used in place of a regular cutting blade to cut grass clippings finer so that the grass falls back onto the lawn and decomposes. Mulching is beneficial to lawns in many ways. It keeps the soil cooler and reduces water evaporation, meaning the lawn needs less water to stay green. Grass clippings can contain over 70 percent water. Mulching also provides added nutrients to the soil. Mulching blades are also time savers. There are no grass clippings to rake and dispose of after mowing the lawn.A wrench is needed to remove the cutting blade and install the mulching blade. The mower should be on a flat surface with wheel chocks to prevent rolling. Lift the mower deck with a jack to access the cutting blades. Wear gloves to protect the hands. Remove the cutting blade. Install the mulching blade. Lower the mower and remove the chocks. This 46-inch mulching blade is made of metal and sold as an individual unit. It is compatible with push lawn mowers and riding lawn mowers manufactured by Craftsman, Husqvarna, and Poulan

The snowblower is designed to remove snow from the surface over which it is run, but no snowblower is designed to totally eliminate all of the materials beneath it. Most leave a small skim coating that ensures the augers don't scrape along the ground and damage a walkway or drive. However, many are also equipped with a scraper bar that removes even more of the snow than the skid plates allow. If the scraper is damaged or bent, it will mean a less satisfactory performance by the blower. This is an OEM part that is very easy to install with little more than a properly sized screwdriver and a socket or wrench set. This replacement scraper bar is designed to fit many different snowblowers made by Husqvarna and Poulan, and works with more than 100 models. It ships individually with mounting hardware.

This mulching blade is a 3-in-1 blade. It can cut, discharge, and bag grass clippings. This versatility is due to its curved surface design, which promotes an increased cutting edge. When this mulching blade is in action, the grass clippings will be transferred to the deck and cut once more. Once it falls back to the ground, the clippings are smaller. Smaller clipperings are suitable for mulching because they decompose faster. A mulching blade is made from sturdy metal, but prolonged use can make its edges dull. A dull mulching blade will result in undesirable fraying and tearing cuts. A mulching blade replacement takes 30 minutes or more. Start by disconnecting the spark plug and turn the machine on its side. Then, remove the old blade. Insert the replacement into the blade spindle and use a ratchet for a secure fit. This original Husqvarna mulching blade replacement is a perfect choice. It is made explicitly for lawnmowers from Husqvarna, Murray, Craftsman, Weed Eater, Ariens, Ryobi, and Poulan. It measures 22 and comes in solid metal construction. It is sold individually.

This blade adapter is an authentic OEM replacement part for a lawn mower that attaches the blade to the rest of the assembly while still leaving enough space for the blade to swing around. They must be made strong enough to withstand the whipping torque of a lawn mower's blade but also should be weak enough to break before the blade. This way, the blade does not fly off the lawn mower. Blade adapters are most commonly damaged when a user accidentally mows over a hard object such as a rock or a tree root. The effect of the blade striking the object causes the adapter to bend or snap. Replacing a blade adapter is an easy job that only requires a socket wrench to remove the blade and a mallet to knock loose the old adapter. Blade adapters have a locking key that holds them in place so no other hardware is required for assembly. This part is made for Craftsman and Husqvarna lawn mowers and is sourced from its original manufacturer. This part ships individually.

This is a genuine replacement blade for select mulching riding lawn mowers. The mower/mulch blade includes a center hole for attaching to the mandrel assembly with a bolt or nut. When secured and properly sharpened, the blade will cut the grass into fine clippings that can be left behind for mulching. Over time, this blade is subjected to regular use, repetitive motion, and potential ground contact. Other damage can also occur, such as if the mower hits a stump or a rock. In the event that the blade is warped, damaged, or dull, it needs to be replaced immediately. This genuine OEM mulching mower blade is designed for use with compatible riding lawn mowers from Poulan, Jonsered, and Husqvarna. There are more than 90 models that take this blade. This durable blade is made from high-quality metal and sold as a single unit. Hardware is not included with this purchase and will have to be purchased separately if it is required. The blade can be replaced with a wrench. Be sure to disconnect the spark plug and/or battery for safety before working on the blade or other moving parts.

This depth bar is an authentic OEM part sourced directly from the manufacturer for use on tillers to allow the tiller to dig into the ground and tear it up. The depth bar reduces the forward movement speed of the tiller which can be beneficial when the ground is hard-packed. If the depth bar breaks, it should be replaced to keeps the tiller operating efficiently. The depth bar is located on the back of the tiller. Before removing and replacing it, make sure the spark plug is removed from the machine and is parked on a flat surface. Remove the screws holding the depth bar in place. Set the screws aside. Line up the new depth bar with the holes and insert the screws. Tighten the screws and put the spark plug back in place. This depth bar a heavy-duty metal bar that is sold individually. It is designed for use in tillers manufactured by Poulan, Jonsered, and Husqvarna.

This is a four-in-one blade that is used for push mowers from several manufacturers. It is used for shredding and mulching leaves. This provides users with more options when cutting the grass on their lawns. If the blade is not working properly, it will limit the functionality of the mower.The metal blade on a mower is durable and meant to last. However, accidents such as running over stumps or rocks could cause the blade to bend or break. Older blades could become worn down and chipped. In some cases, the metal may even begin to corrode. Regardless of what causes the damage, owners need to change the blade out when it no longer works correctly. When replacing the part, users should wear work gloves to protect their hands. This blade works for certain models of push mowers from Husqvarna and Jonsered. It is sold individually and is a genuine OEM replacement blade sourced from the manufacturer.

This is a replacement blade holder. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or otherwise defective blade holder on a variety of different lawnmower models. This part securely holds the blade of the lawnmower and allows the blades to be interchanged or replaced more easily. This part is subject to regular wear and tear from debris or contact with hard surfaces and may require replacement. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. Proper tools are required to replace this part. For more accurate information on how and where to install this blade holder, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this blade holder is suitable for use on several different lawnmower models manufactured by Husqvarna and Craftsman. This is a genuine part made of high-quality, durable materials and is sold individually.

This genuine Husqvarna replacement part is a blade for use with lawn mowers. It is also known as a rotor blade or bagger blade.The lawn mower blade is used to cut grass, and a bagger blade is designed to help lift clippings after cutting, helping them to more easily be directed into the lawn mower bag. A properly functioning blade is essential for the safe and reliable use of a lawn mower. The blade may become worn out or damaged due to extended use, requiring a replacement. Remember to check the blade periodically to spot any wear or damage. This part is an identical replacement for a blade that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and is sold individually. It is made of high-quality durable metal. This part is compatible with Husqvarna, Craftsman, and other lawn mowers. Please note: original part number 581101102 is now obsolete, and manufacturer has replaced the original part number with this part.

Note: This is ONE blade.