Husqvarna Cap, Lid & Cover

This part is a replacement blade cap assembly. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part will replace a broken, lost or defective blade cap assembly in lawn tractors.The blade cap assembly enables the user to easily change the tractor's blades. It is housed in the middle of the blades for quick access. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this blade cap assembly, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This blade cap assembly can be used with lawn tractor models that have been manufactured by Husqvarna and Poulan. Sold individually.

A lawnmower, weed whacker, or trimmer is exposed to a lot of flying debris, and this puts many parts at risk of becoming clogged with grass and other materials. This cover is designed to prevent any debris from reaching the interior of the wheel or the axle. If a large amount of grass or clippings accumulate inside of the assembly, the machine will be almost impossible to move forward - whether self-propelled or manually operated. This cover prevents that from occurring and simply kicks it back in the direction it came. It does take a lot of wear and tear. Installing it is extremely easy and requires little more than a wrench. Even if the cover is aged, or broken, it will remove easily and take minutes to replace. Expect to replace this at least once over the average lifespan of a trimmer. This works with Husqvarna, Poulan, Craftsman, Ariens, Weed Eater, Jonsered, and Murray makes and models. It is a genuine OEM part sold individually.

This genuine Husqvarna fuel cap provides cover and protection to the hole into which engine oil is dispensed on certain lawn mowers, lawn tractors, and snowblowers. This fuel cap should remain closed when the appliance at hand is not in use in order to prevent leakage.If the engine of a small engine appliance is suffering from frequent leakages, there could be damage in the fuel cap that is causing the leaks. A fuel cap could also become misplaced. If the cap is broken or lost, it must be replaced immediately before using the small engine appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This fuel cap is compatible with the following brands: Husqvarna, Poulan, Ariens, and Craftsman. This part is sold individually.

Here is an authentic fuel cap assembly that is a replacement for the cap that comes on many gas-powered lawn and garden tools. The cap provides protection and security for the fuel tank opening, so no dirt or debris gets into the fuel. This fuel cap assembly features a retainer, which will keep the cap attached to the tank when refueling. The retainer ensures that the cap does not become lost or fall to the ground. Over time, there could be many issues with the current fuel cap on the machine. It might no longer provide a tight seal. It might no longer have a retainer, or it could have cracked due to age or an accident. Regardless, it is a good idea for owners to get a new fuel cap assembly to ensure the integrity of their fuel. No tools are needed for adding the new cap to the machine. This genuine OEM replacement fuel cap assembly is sold individually. The assembly will work as a replacement for more than 50 machines including edgers, string trimmers, brush cutters, and leaf blowers. It is compatible with models from Husqvarna and Craftsman.

This is a genuine replacement air box cover. It fits over the air box housing and helps to prevent dirt and debris from entering, while also preventing the air filter from becoming wet in the case of rain or falling out during use. The air filter is essential for ensuring clean air for combustion within the engine. The air box cover is made of durable plastic. However, over time, plastic components can become brittle with exposure to high heat and harsh sunlight, leading to cracks and damage. The air box cover can also be damaged if the machine is dropped or through contact with hard surfaces. Replacing the air box cover is a simple process. A plastic knob holds the cover to the base. Simply twist and remove the knob, and then remove the damaged air box cover. Replace it with the new cover and put the knob back in place. This replacement air box cover fits several Husqvarna edgers, brush cutters, and trimmers. Note that this is a genuine OEM part and is sold individually.

This is a replacement oil cap for a variety of small gasoline-powered tools they build. These devices include power saws, chainsaws, trimmers, and pruners. The oil cap is tethered to the oil tank, granting easy access to the engine oil for filling or replacement while preventing outside contaminants from getting into the oil basin and, thus, the crankcase. While the cap is not a moving part, it is one of the most exposed pieces of this work equipment. As such it collides with multiple heavy objects such as other tools, trees, cement structures, and truck beds. This type of wear and tear can cause the interior threads of the cap to warp so that the cap cannot be closed tightly. The cap can also be damaged so that it leaks. For safety reasons as well as for the proper operating condition of the equipment, a damaged oil cap should be replaced immediately. Make sure when removing the old cap that the tether is completely freed from the power tool, and make sure the new tether is properly attached. This replacement cap is a genuine OEM part, built to the same specification as the factory original piece and fits Ryobi and Poulan machines.

This part is a shield that is used on lawnmowers and lawn tractors. It is manufactured out of a high-quality and durable metal. The purpose of the shield is to protect the engine from any flying debris. This component is held in place by two bolts.A new shield may be needed if the current one is cracked, broken, bent, or damaged in any way. If the shield experiences an impact collision with a hard object, it could become damaged. A socket set may be needed during the replacement of the shield. Make sure the outdoor power equipment machine is cooled off prior to attempting to work on it. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This shield is a genuine Husqvarna part. It is sold individually. This particular shield is compatible with lawnmowers and lawn tractors that are manufactured by Husqvarna.

This replacement part is a gear cap. This is a genuine replacement part made by Husqvarna. This part is small but used to keep different gears within the lawnmower safe and secure during use. This part is made of durable plastic and meant to be a strong protector for many gears. A new gear cap might be needed if the current one is missing or damaged in any way. This can include being dented, bent, cracked, or chipped. If the gear cap is not able to stay in place, it might be time to replace it. Be sure to wear work gloves during this repair. It is also recommended that the user refers to the appropriate user manual before replacing this part. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit and long-lasting use.

This replacement part is a fuel cap assembly. This is a genuine replacement part made by Husqvarna. Fuel caps are commonly found in machines that require fuel to run. The engine then uses the fuel to operate effectively. The tank is what holds the fuel so that it can be accessed during use, and the fuel cap ensures that the substance stays inside the tank and does not escape during use.A new fuel cap assembly might be needed if the current one is damaged or leaking the fuel. If this is the case, replace the cap immediately as leaking fuel is a serious safety hazard. It is recommended that work gloves be worn as there can still be fuel leftover in the tank during the repair. This is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This is a replacement engine guard that will work with a range of mowers. As the name suggests, the engine guard is used to help keep the engine of the mower safe. It will help to keep debris and other materials from getting into the engine. If the engine guard is broken or cracked, it could lead to problems with the engine from foreign debris. Replace this part as soon as possible.The engine guard is made from quality material and is designed to be durable. However, because it is on the front of the mower, it can suffer a substantial amount of wear and tear. There is also the possibility of damaging the guard while operating the machine. Owners should be able to replace the guard with no issue.The engine guard will work as a replacement for select models of zero-turn mowers from Husqvarna. The piece is sold individually. It is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This replacement part is a steering lever and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. Steering levers are important in many different types of ridden lawn mowers and assist the user in ensuring the proper movements during use.A new steering lever might be needed if the current one is not working properly. This can be due to normal wear and tear over time. It is common that the steering lever can become stripped over time. If the user is having trouble steering smoothly or notices that the steering of the machine is rigid, it can be due to a worn-down steering shaft. Be sure to wear work gloves when replacing this part. It is also recommended that the engine be powered off. This is a genuine OEM replacement part to ensure proper fit and long-lasting use. This steering lever is sold individually and is sourced directly from the manufacturer.