Husqvarna Control Cable

The drive control cable is a feature of self-propelled walk-behind mowers that engage the gears of the propulsion mechanism. This cable is necessary to allow users to determine when they want to engage the self-propulsion mechanism and when they either want to allow the machine to idle or they wish to push it when mowing in small, tight areas where the self-propelling mechanism is not useful. Occasionally, as with all such mechanisms, the cable may break and it will become necessary to replace the drive control cable. In order to replace the cable, first disconnect the spark plug boot and drain the gasoline, since it's necessary to raise and lower the engine. If it's necessary to place the mower on its side, remember to keep the air filter up so oil does not drain into it. Release the drive cable from the housing that it shares with the engine engagement cable. Remove the drive gear housing on the bottom and the top of the cutting deck. Use needle nose pliers to remove the drive cable. Reverse the process to attach and engage the new drive control cable. This replacement cable is a genuine OEM part, manufactured to be identical to the original cable specifications. This cable is compatible with Craftsman and Husqvarna engines.

This part is a replacement zone control cable. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a defective or broken zone control cable in a variety of lawn mower models. The zone control cable is essential to safe use of the mower as it stops the engine should the user let go of the handle. This part will require replacing if stretched, snapped, or rendered ineffective. When working on or near an enginee, it is important to ensure the equipment is powered down and completely cool before beginning repairs. For more accurate information on how and where to place this zone control cable, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this zone control cable is suitable for use on lawn mowers manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This is a genuine OEM replacement clutch cable for a lawn tractor with a mechanical clutch system. A mechanical clutch is a simple transmission system engaged when the operator pushes a lever. The clutch cable transfers energy from the motor and either engages or disengages the mower blade. The clutch is essentially a brake for the mower blade. This allows the operator to stop mowing without having to turn off their appliance. The clutch cable can tense up in colder climates and snap, or alternatively, it can lose tension over time and no longer provide enough force to engage the clutch. Should this happen, the operator will not be able to turn the mower blade off or on, depending on what position the clutch is in. To replace the clutch cable, detach the lower deck from the lawn mower and disassemble the old cable with a pair of pliers. Replace with a new part and reassemble the lower deck. This repair is easy and straightforward but be sure to not lose the clips that hold the lower deck in place. This replacement clutch cable is compatible with lawn mowers made by Husqvarna, Poulan, and Jonsered. It comes sourced from its original manufacturer and ships individually.

This engine control cable is responsible for controlling not only the engine speed but also the rotation of the blades. The engine control cable attaches to the control handles of the lawnmower. When the handle is pushed down, this will activate the engine control cable to power the engine and the blades. When the engine control cable is malfunctioning, the machine's engine and blade won't move no matter how hard the control handle is pressed. Replacing the engine control cable is a straightforward procedure that requires a nut driver and pliers. Wear gloves for protection. Husqvarna manufactures this brand-new engine control cable. It has Z-type bent ends and thick, durable rubberized exterior layer. There's a plastic clip, too. It is specifically made for Craftsman, Murray, Husqvarna, Weed Eater, Ariens, Poulan, and Poulan Pro lawnmower models. It approximately measures 61 inches and is sold individually.

This control cable is a genuine Husqvarna part, sold individually. This control cable can be used as a replacement part in a lawnmower. The purpose of the control cable in a lawnmower is to allow the operator to monitor and regulate the speed, pace, and propulsion of the appliance by engaging and disengaging the cable.Over time, a control cable may experience fraying, scratching, tearing, ripping, warping, or eroding. If this occurs, the control cable should be removed and replaced by this genuine OEM replacement part in order to facilitate continued use of the lawnmower by the operator in a safe and proper manner.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This control cable is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Murray.

This is an engine zone control cable, also known as a control cable, manufactured by Husqvarna. This component stops the blade when a lawn mower handle is released. When this part goes bad, it can cause the brake not to release even when the handle is pressed down. Engine zone control cables are known for experiencing wear and tear with regular use. If the cable has any signs of damage, cracking, wear, or stretching, it will need to be replaced. First, disconnect the spark plug wire before releasing the cables from the handle. Next, remove the drive cover before removing the engine zone control cable. The replacement engine zone cable can be connected to the transmission and the drive cover can be replaced. Install the control cable back onto the mower handle, reconnect the spark plug wire, and the lawn mower will be usable again. This is a genuine OEM replacement part that comes directly from the manufacturer. It can be used for mowers from Husqvarna, Weed Eater, AYP, Craftsman, RedMax, Poulan, Poulan Pro, Jonsered, and McCulloch. It is sold individually, and the replacement is considered easy. A screwdriver and pliers are the only tools that will be needed.

The replacement throttle/choke control seen here is compatible with several lawn tractor models from well-known manufacturers. The throttle is an important part of the tractor, which will control the speed of the engine and the speed of the blades. It is also used to start the engine. Owners may notice that the machine has poor performance, and it is not easy to control the speed when there are issues with the throttle.The control mechanism is made from metal and plastic. While the piece is durable, it can still have issues that would require replacement. Some of the metal parts and connectors could start to wear down or even corrode over time. The plastic could crack on the handle, and it could be more difficult to use. Replace the part as soon as possible if necessary.The replacement throttle/choke control works with certain lawn tractors from Poulan, Husqvarna, and Jonsered. It is sold individually. This is a genuine OEM replacement part that has been sourced right from the manufacturer.

This throttle control assembly is a genuine MTD part sold individually. This throttle control assembly can be used as a replacement part in a lawnmower. The purpose of the throttle control assembly in a lawnmower is to allow the operator of the appliance to fully regulate and maintain the speed and pacing of the appliance to a customized setting that adheres to the needs and comfort of the operator.The throttle control assembly could be punctured, dented, ripped, torn, scraped, scratched, warped, or eroded, and if this damage precludes the function of the throttle control assembly, it should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This throttle control assembly is compatible with the following outdoor appliance brands: MTD and Craftsman.

This clutch cable is a genuine Husqvarna part, sold individually. This clutch cable can be used as a replacement part in a lawn mower. The purpose of the clutch cable in a lawn mower is to provide the operator with a means of stopping and starting the lawn mower while in use, by engaging and disengaging the clutch cable when the operator wants to move the appliance forward or stop the appliance from moving.The clutch cable in a lawn mower might be subject to damage at some point within the typical lifespan of the appliance. If this damage prevents the clutch cable from serving its standard function for the lawn mower, the clutch cable should be removed and replaced by this genuine OEM replacement part before using the lawn mower again, so that the safe use of the appliance can be guaranteed. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This clutch cable is compatible with the following outdoor appliance brands: Husqvarna.

This part is a replacement drive control cable. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a worn out or faulty drive control cable in a variety of lawnmower models. The drive control cable is essential for proper control of the lawnmower as it stops the engine when the handle is released. If the cable is stretched, worn, or otherwise damaged, the equipment is not safe to use and this part should be replaced immediately. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this drive control cable, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this drive control cable is suitable for use on several different models of lawnmowers manufactured by Husqvarna and Jonsered. This is a genuine part made of high-quality, durable materials and is sold individually.

This part is a replacement engine zone control cable. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a faulty engine zone control cable in a variety of models of lawn mowers.Engine zone control cables ensure that the engine shuts off when the user releases the handle. This part is necessary for proper and safe equipment functionality and thus will need to be replaced is snapped, stretched, or malfunctioning in any way. When working on or near an enginee, it is important to ensure the equipment is powered down and completely cool before beginning repairs. For more accurate information on how and where to place this engine zone control cable, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this engine zone control cable is suitable for use on lawn mowers manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This replacement part is a cable control. It is a genuine replacement part made by Husqvarna. This part is typically found in lawnmowers and allows the user to control the settings of the appliance by using the cable. This is attached to the engine and allows different settings and powers to be selected.A new control cable might be needed if the current one is damaged or missing. If the control cable is stripped from regular use over time, it is recommended that it be replaced. If the user is unable to control the appliance from the control cable, it can be due to a faulty cable. Be sure the engine is powered off completely before replacing it.This is a genuine OEM replacement part to ensure long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure a proper fit.