Husqvarna Lawn Mower Parts

Replaces cracked, rusted, or damaged muffler on riding mowers. Reduces exhaust noise and prevents sparks from igniting debris on the ground.

Replacement blade cap assembly for riding mower tractors. Secures mower blade to spindle shaft. Replace if cracked, broken, or missing for safe operation.

Uneven lawn cuts or poor mulching? This walk-behind mower blade restores clean cutting performance. Simple DIY replacement in under 30 minutes.

Replacement 4-in-1 lawn mower blade for mulching, bagging, lifting, and shredding grass. Replace if cracked, bent, or dull. Verify fit with model number.

Metal frame that holds the grass catch bag on walk-behind mowers. Replace if bent, broken, cracked, or damaged from repeated removal and installation.

A V-belt is responsible for transmitting energy. It is made from a thick and sturdy rubber material. It features grooves for improved traction and measures ½ x 95-1/2. A worn-down v-belt can lead to inefficient energy loss, and therefore poor performance. Installing this v-belt requires pliers and a wrench. First, the spark plug wire needs to be removed. Then, position the mower deck to the lowest possible level. Move the machine's blade engagement level to OFF. Remove the belt found from the engine pulley. Don't forget to take out the bow-tie pins and blade engagement cable as well. Remove the bolt from the pulley cover and loosen the nuts found at the idler pulley. Put the new belt and then tighten the nuts on the idler pulleys. The deck can now be re-assembled to its original position. This Husqvarna 532144959 V-Belt OEM Replacement can help keep a lawnmower in top condition. This genuine Husqvarna made V-belt is specifically for driving the blades on a lawnmower. It is compatible with Ariens, Craftsman, Poulan Pro, Dixon, and Husqvarna mowers. This V-belt is sold individually.

Lawn tractor won't start when you turn the key? This starter solenoid links your battery to the starter motor. Common DIY fix for no-crank issues.

48-inch discharge deflector assembly for rear-engine riding mowers. Mounts to deck to direct grass clippings. Replace if cracked, broken, or missing.

Drag link ball joint connects the steering mechanism to the spindle on riding mowers and lawn tractors. Replace if worn, cracked, or loose fitting.

Mower won't start or starter doesn't engage? This ignition switch activates your riding mower's electrical system. Simple DIY repair in under 30 minutes.

Rear wheel assembly for walk behind lawn mowers. Installs on the rear axle shaft. Replace if your wheel is cracked, worn, or damaged for smooth operation.

This is a genuine OEM replacement drive V-belt for a riding lawn mower. The drive V-belt attaches to the drive pulley and transfers rotational motion from the transmission to the mower blade. This causes the blade to then spin and cut grass. By using a belt to transfer motion, the engine does not have to work as hard to spin multiple parts, meaning that it runs more efficiently. Drive V-belts are made of a rubber composite material that will begin to fray and stretch over time. Due to continuous motion, these belts absorb a lot of wear and tear, and if left for too long, they can eventually snap and leave the mower blade non-functional. Therefore, it is wise to check the condition of a V-belt during regular maintenance. As soon as it appears to be wearing away, replace it with a new part using a nut driver and screwdriver. When detaching the lower deck, be sure not to lose the bolt clips, as they are required for reassembly. As a high-quality replacement part, this drive V-belt is directly sourced from its original manufacturer. It is compatible with riding lawn mowers made by Husqvarna, Poulan, Craftsman, and Jonsered. This part ships individually.

This mow ball assembly is used in many Husqvarna string trimmers to offer a height guide that prevents the trimmers from cutting grass or other foliage too low. This is an entire assembly that includes the ball bearing, plastic housing, and retaining ring needed to replace the mow ball. The bolt that is used to attach the part to the string trimmers is available separately. If the mow ball assembly is broken or damaged, the guide for the blade will not function and the trimmer may cut the grass too close to the ground. The first step to replace this part is unbolting the assembly using the bottom bolt located on the shaft of the cutter. Clean all the parts before greasing the adjustment button to make it easy to move. Take off the mow ball assembly and replace it with a new one.This part is sold as an individual unit. It is an authentic OEM replacement part that is directly sourced from the manufacturer. The mow ball assembly is compatible with string trimmers manufactured by Husqvarna.

Secures the mower blade to the spindle on riding mowers and tractors. Replace if bolt is stripped, washer is damaged, or hardware is missing.