Husqvarna Lawn Mower Parts

This is a riding mower fan that works as a replacement for damaged fans for many mower and tractor models. This fan connects to the transaxle above the pulley. The purpose of the fan is simple—it helps to move air around the transmission, which will prevent overheating. If the machine's engine is running hot, a problematic fan could be to blame. Check the fan and replace it if needed. If the fan doesn't run, the tractor will overheat and not operate properly. Overheating could cause further damage to the engine.The fan is made from high-quality plastic. It should last a long time without worry, but blades could crack and break off eventually due to wear and tear. The fan could also be damaged because of an accident. Regardless, replace the fan.The riding mower fan serves as a replacement for tractors and riding mowers from Jonsered, Husqvarna, and Craftsman. It is sold individually and is a genuine OEM replacement part.

This is a replacement mandrel assembly used for mowers. The mandrel assembly is one of the most important parts of the machine. This is the part that houses the shaft that the mower blades attach to. The mandrel assembly is mounted to the deck of the mower. The mandrel assembly is made from metal and it tends to be durable. However, it may need to be replaced at some point for any number of reasons. There could be corrosion, or it might no longer be functioning properly because of damage. Regardless of the reason the assembly is not working properly, it will need to be replaced to ensure the machine has full functionality. The replacement is relatively simple to do, but it should be noted that the bolt holes do not come tapped. The genuine OEM replacement part is high-quality and is sold individually. It does not come with the four bolts that will be needed to attach it to the deck. This part is used for lawn mowers and riding mowers. The brands compatible with the part include Craftsman, Husqvarna, and Poulan.

This is a replacement clutch. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a malfunctioning or broken clutch on various lawnmower models. The clutch enables the power generated by the engine to be applied gradually and prevents crunching the gears when shifting. Clutches can be damaged and may require replacement. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools may be required to replace this part. For more accurate information on how and where to install this clutch, reference the appropriate owner's manual and included diagrams.As an authentic replacement part, this clutch is suitable for use on several different lawnmower models manufactured by Husqvarna. This is a genuine part made of high-quality, durable materials and is sold individually.

This steering shaft is a genuine Husqvarna replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, chipper shredders, and tillers. The function of a steering shaft is to connect the steering wheel to the steering gearbox. This allows the wheels of the small engine appliance to turn smoothly.A steering shaft might have to be replaced in the event that it suffers damage over time; this could be a result of regularly steering through uneven and irregular terrain or of turning the steering wheel too far in either direction too often, which can be overwhelming to the gears. Additionally, a steering shaft might have to be replaced if there is material deterioration over time. If this occurs, a replacement steering shaft part should be ordered and secured to the small engine appliance immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This steering shaft is compatible with the following brands: Husqvarna, Poulan, and Craftsman.

This part is a clutch that is used on lawn tractors and riding lawnmowers. A clutch transfers the power from the unit's engine to the drivetrain and is responsible for engaging the blade.A new clutch may be needed if the lawn tractor or riding lawn mower will start but then stalls. If the clutch is sticky or if it operates hard, it may be time to replace the clutch. If the engine is revving higher than usual or if there are strange noises coming from the clutch, it is likely that the clutch could be going bad. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This clutch is a genuine Husqvarna part. It is sold individually. This particular clutch is compatible with lawn tractors and riding lawnmowers that are manufactured by Husqvarna and Poulan.

Husqvarna brand Pivot Section Drive Control/Pivot Bar

This high quality choke lever is used on string trimmers and edgers from multiple manufacturers. The plastic choke lever actuates the choke valve which creates a limit to the amount of air that can enter the engine when the equipment is cold started. If the choke lever has been damaged or is broken, it may create problems with starting the tool. If this is the case, the choke lever will need to be replaced.This is a simple replacement project that requires only a screwdriver and a pair of work gloves. Before starting, make sure the tool is turned off and the spark plug wire has been removed. Place the tool on a flat surface and take out the choke lever. The broken choke lever can be removed using the screwdriver. The new replacement choke lever can be installed before tightening the screws and using the equipment again.This is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The choke lever is made for use with edgers and string trimmers manufactured by Craftsman, Husqvarna, and Poulan.

This flange bearing replacement is sourced directly from Husqvarna. It is made from metal and measures ¾ x 1-3/8 x 1. A flange bearing features a distinct flange or extension at the outer ring. When attached to a shaft exposed to a heavy load and a rapid rate, the flange bearing provides additional support and strength and withstands axial thrusting. Tractor or mower wheels have flange bearings. They are installed between the rim and tire. It helps with proper wheel rotation. If an unusual grinding and squealing sound comes from the wheel, the flange bearing may need replacement. This flange bearing replacement is a genuine OEM component made for select Husqvarna tractor models. During installation, make sure to have a hammer and punch within reach. This brand-new flange bearing is sold separately.

This hub cap is manufactured by Husqvarna and comes in glossy black color. The main function of a hub cap is to provide a protective barrier or cover for the wheel hub and lug nuts against dirt, grime, and other harmful elements. Wheels that do not have hub caps are more susceptible to damage. Corrosion or rust on the lug nuts is common for wheels free of hubcaps. This results in harder lug nut removal. Over time, rust can spread and damage the hub. With hub caps installed, costly repairs and replacements are no longer a concern. Installing a hub cap will take less than five minutes. A rubber ballet can be used to push the hub cap to the wheel hub. To install this genuine front hub cap, simply push it down or use a rubber mallet. When protecting the hub and axle of a lawnmower, this Husqvarna 532104757 Front Axle Hub Cap OEM replacement is an option. It is an OEM front axle hub cap compatible with most Husqvarna Weed Eater, Poulan and Craftsman tractor and mower models. This front axle hub cap is sold individually.

This headlight switch is a genuine Husqvarna part, sold individually. This headlight switch can be used as a replacement part in a lawnmower. The purpose of the headlight switch in a lawnmower is to provide the operator with a source of illumination in order to operate the appliance at any point during the night or during a period of sustained darkness.The headlight switch in a lawnmower might have to be completely replaced if it can no longer trigger the turning on of the headlights of the appliance when the operator desires to use the appliance in darkness. The headlight switch could suffer damage due to exposure to inclement weather, general wear and tear over long-term use, or an accidental collision with a hard object.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This headlight switch is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Ariens, Poulan, Murray, and Dixon.

This replacement deflector shield is a genuine OEM part intended for use on lawn mowers and tractors. It attaches to the side of the mower and directs grass clippings away from the blade as it mows. This serves to keep grass from bunching up in the blade, which could cause it to stall out. The direction of the deflector shield also blows grass clippings behind the mower to keep any potentially hazardous debris from flying up at the mower. Deflector shields can become dried out and brittle over time and can snap off if the mower drives too close to a wall, tree, or other hard object. Deflector shields usually only need replacing if they break. This would cause grass clippings and debris to fly in all directions, which could be dangerous for the user. Replacing the deflector shield is an easy repair and only requires a socket wrench set. This part is compatible with a wide variety of Husqvarna and Craftsman lawn mowers and tractors and is sourced from the original manufacturer. This product ships individually.

This is a genuine OEM mandrel kit with a nut that is sourced directly from the manufacturer. It is designed for use on lawnmowers, tractors, and other outdoor lawn and garden equipment. The mandrel is responsible for spinning the blades on lawn mowers. It is part of the deck and can be a safety issue if not properly attached or if broken. If the spindle is broken or bent during use, it is apparent by uneven cutting, loud squealing, or vibrations, and buzzing sound. Mandrel replacement should be on a flat service for safety. If the mower is hot, allow it to cool before making repairs. Remove the spark plug and empty the gas tank. If the deck on the mower is removable, remove it before jacking the mower up. Once the mower is in the air, remove the blades to access the spindle. Remove the spindle. This is an excellent time to check the bearings and replace them if needed. Install the new spindle. Reinstall the blades. Lower the mower and if the deck was removed, reinstall the deck. This mandrel kit is made of high tensile metal; it comes with the nut for installation; it is sold as an individual unit. This mandrel kit is compatible with lawn mowers manufactured by Husqvarna Poulan, Weed Eater, and Ryobi.

This is a rear tire for a lawn mower or lawn tractor. Tires are critical to the smooth, comfortable operation of a lawn mower, and their lifespan depends on how they are used. Lawn mower tires that are used more frequently, or on rougher terrain, will typically have a shorter lifespan. Lawn mower tires may lose traction over time with repeated use. They may also weaken and be unable to hold air pressure for long periods of time. Occasionally, a lawn mower tire may become punctured or damaged. Lawn mower tires may also degrade through exposure to extreme weather conditions, such as heat, rain, wind, and cold. A visual inspection can help determine whether it is time to replace the tire. Depending on the condition of the tires, it might be necessary to replace both rear tires at once. This can ensure a smooth, even mowing experience, and prevent additional damage to the mower. This lawn mower tire is an OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with lawn mowers and lawn tractors made by Jonsered, Poulan, Ariens, Husqvarna, Craftsman, Rally, Yard Pro, Murray, Ryobi, Weed Eater, Western Auto, Companion, and Southern States.

This replacement part is an ignition switch and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. The ignition switch is an important part of many different lawn mowers, as it allows the appliance to be turned on.A new ignition switch might be needed if the current one is damaged, broken, or if the key blade is snapped off in the ignition. If the user is unable to start the machine through the ignition switch, it is likely damaged or malfunctioning. It is possible for the ignition switch might need to be replaced after years of normal wear and tear. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This is a brake pad. The brake pads attach to clips and serve to stop the mower. The pads push against the rotors and cause friction, allowing the mower the stop movement. Worn-down brake pads can be hazardous to the rider and the mower. There are several signs of worn-down pads. There may be a squeaking or scraping sound coming from the wheel area. If the problem persists, a noticeable grinding sound can even be felt when the mower is driven.Replace the pads by removing the wheels. The pads are attached to calipers that fasten to the rotors. These are removed with a socket wrench. After removing the calipers, there are clips that fasten the pad in place. Push these clips and remove the old pad. Repeat these steps in reverse to install the new pads.This product is a genuine OEM part and is sourced directly from the manufacturer. These Husqvarna brake pads are sold individually as separate components from the rest of the machine. This product is only compatible with Husqvarna machines.