Parts for Lg LMXC23746D/01: Ice Maker & Ice Bin Parts

Mounting screw for refrigerator assembly. Replaces lost, stripped, or damaged screws. Essential hardware for securing panels and components.

This is a genuine replacement screw used to secure appliance panels and components. It restores proper fastening so panels and assemblies stay aligned and operate safely. What it does:

• Fastens panels, brackets, and small assemblies to maintain structural integrity
• Replaces missing or stripped screws that cause rattling or loose parts
• Helps stop vibration-related noise when used in its original mounting locations
• Matches the OEM fit to ensure proper alignment and clearance

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread or component damage
• Disconnect power to the appliance before working on electrical components
• Replace all matching fasteners for even fit

Mounting screw secures panels, brackets, and interior components in your refrigerator. Replace stripped, missing, or damaged fasteners to prevent rattling.

Replacement mounting bolt for refrigerator components and assemblies. Needed when original fastener is missing, stripped, or damaged during service work.

Replacement mounting screw for refrigerators. Secures internal components and panels. Order when original hardware is stripped, lost, or damaged.

Secure refrigerator panels, brackets, and internal components with this replacement mounting screw. Ideal for missing, stripped, or damaged fasteners.

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Replacement mounting screw for refrigerators. Secures panels, shelves, or components inside your fridge. Order if original is stripped, missing, or lost.

Secures panels, brackets, and components inside your refrigerator. Replace this fastener if worn, missing, or stripped to restore proper assembly.

Water pooling under your refrigerator? A damaged drain tube assembly causes leaks and water buildup. This direct-fit part restores proper drainage.

Leveling leg for refrigerators. Installs at bottom corner to elevate and stabilize the appliance. Replace if broken, compressed, or no longer secure.

Fixes uneven cooling and temperature issues in your refrigerator. This air duct assembly restores proper airflow between compartments for consistent temps.

Small protective cap covers component connections or openings in your refrigerator. Replace when cracked, missing, or worn to protect against dirt and moisture.

The Shelf Assembly is an OEM replacement part for LG refrigerators. It provides a movable shelf surface for organizing and storing items in the refrigerator or freezer compartment. 

Symptoms of a bad shelf assembly include:

• Sagging or bowing of the shelf surface 
• Difficulty in moving or removing the shelf
• Damage or cracks in the frame or wire grid
•  Inability to bear weight as intended

Causes of failure can be repeated overloading, accidental impacts, or normal wear and tear over time. 

This authentic LG shelf assembly is also compatible with refrigerators by Kenmore models.

Drawer tray assembly for bottom-mount refrigerators. Replaces cracked, broken, or worn drawer trays. Installs in fresh food compartment drawers.

Drawer tray assembly for bottom-mount refrigerators. Replaces cracked, broken, or worn drawer trays. Installs in fresh food compartment drawers.

Refrigerator drawer tray assembly that holds items in the fresh food or crisper drawer. Replace if cracked, broken, warped, or missing from your unit.

Replacement door basket for refrigerator door storage. Installs on the door interior to hold bottles and small items. Replaces cracked or broken bins.

Replacement drawer tray assembly for refrigerator drawers. Restores support and containment when original tray is cracked, warped, or damaged.

Replace your refrigerator door shelf net basket if damaged, cracked, or missing. This wire basket organizer installs on the door to hold items securely.

Glass shelf assembly installs in the fresh-food compartment to provide stable storage for food and containers. Replace when cracked, chipped, or missing.

Replace a cracked, broken, or missing glass shelf in your bottom-mount refrigerator. Restores flat storage surface for organized food placement.

Replaces cracked, broken, or worn glass shelf in your refrigerator's fresh-food compartment. Restores sturdy storage space and visibility.

Replaces cracked, broken, or worn glass shelf in your refrigerator's fresh-food compartment. Restores sturdy storage space and visibility.

Replaces cracked, broken, or worn glass shelf in your refrigerator's fresh-food compartment. Restores sturdy storage space and visibility.

This is the shelf frame that sits above the crisper drawers in the refrigerator compartment and supports a glass panel insert (glass not included). It provides a sturdy surface to hold items while enclosing the humidity-controlled crisper section below. Replace this frame if it is cracked, warped, or broken, which can cause the glass to sit unevenly or fall through.

Rail guide assembly for refrigerator sliding racks and drawers. Installs on track to guide smooth movement. Replace if cracked, broken, or worn out.

Replacement rail guide assembly for refrigerator drawers. Installs on sliding drawer mechanism to keep drawers aligned and moving smoothly. Needed when cracked or broken.

Secures slide rail to mounting point in refrigerator drawers. Replace if cracked, worn, or missing to restore proper alignment and smooth drawer operation.

This is a rail connector or basket support piece that attaches to the interior of the freezer compartment and helps guide or support a sliding drawer or basket. It ensures the drawer moves in and out smoothly along its track. Replace this part if the freezer drawer sits unevenly, slides off track, or if the original connector is cracked or broken.

Supports and guides refrigerator drawers for smooth opening and closing. Replace when worn or cracked to restore proper alignment and prevent binding or tilting. Confirm fit with your model number.

Tray cover for bottom-mount refrigerators. Installs over interior storage tray. Replace if cracked, broken, or missing to restore appearance.

Molded exterior panel that shields internal components. Replace when cracked or missing to restore proper fit and protection. Verify fit with your model.

Refrigerator drawer cover panel that sits on the front of your crisper or storage drawer. Replace if cracked, broken, discolored, or missing.

Replacement drawer cover for your bottom-mount refrigerator. Covers the front of the drawer assembly. Order a new one if yours is cracked or damaged.

Drawer guide rail for bottom-mount refrigerators. Installs along the drawer sides to help drawers slide smoothly. Replace if cracked, broken, or worn.

Guides your refrigerator drawer for smooth, aligned movement. Replace if drawer sticks, wobbles, or makes noise. Verify fit with your model number.

Replacement vegetable crisper drawer assembly for bottom-mount refrigerators. Installs in lower compartment to store produce. Needed when original is cracked or broken.

Replaces cracked or broken crisper drawer pan in your refrigerator. Provides sturdy surface for fruits and vegetables. Restores storage support.

Replace your cracked, broken, or missing refrigerator crisper drawer. This vegetable tray assembly restores produce storage in bottom-mount models.

This is the shelf frame that sits above the crisper drawers in the refrigerator compartment and supports a glass panel insert (glass not included). It provides a sturdy surface to hold items while enclosing the humidity-controlled crisper section below. Replace this frame if it is cracked, warped, or broken, which can cause the glass to sit unevenly or fall through.

Fix a refrigerator not cooling properly or running too warm with this temperature sensor. Monitors internal temps to maintain proper cooling.

Guide assembly for refrigerator drawers. Mounts inside the cabinet to support smooth drawer gliding. Replace if cracked, broken, or causing drawer misalignment.

This guide assembly supports and secures a door shelf or bin inside the refrigerator door. It acts as a track or bracket that holds the shelf in the correct position on the door liner. Replace this part if your door shelf is loose, tilting, or won't stay properly mounted in the refrigerator door.

Rail guide assembly for refrigerator drawer systems. Mounts to cabinet interior to support smooth drawer gliding. Replace if cracked, broken, or worn.

Refrigerator drawer rail guide that attaches to the drawer frame and slides along the track. Replace if cracked, broken, or causing drawer misalignment.

Guide rail that keeps your refrigerator freezer drawer aligned and sliding smoothly. Replace this track component if worn, bent, or broken.

This ferrite magnet is a replacement magnetic element used in compatible appliance assemblies to help secure components and maintain proper alignment. It restores magnetic retention and reduces shifting or misalignment during operation. What it does:

• Provides magnetic retention for panels, assemblies or components that rely on ferrite magnets
• Helps maintain proper alignment and secure closure where magnets are used
• Can reduce noise and vibration related to loose magnetic components
• Useful when a brittle, cracked or weak magnet no longer holds parts in place

• Disconnect power and follow the appliance manufacturer's safety instructions before servicing
• Handle the magnet carefully; ferrite material is brittle and can chip or shatter if dropped or struck
• Keep magnets away from sensitive electronics and credit cards; avoid pinching fingers between strong magnets
• If the original magnet is bonded or embedded, some adhesive or light trim may be needed for proper fit.

Freezer door foam assembly for bottom-mount refrigerators. Installs inside the freezer door panel. Replace if cracked, deteriorated, or missing.

Freezer door foam assembly for bottom-mount refrigerators. Replaces damaged, cracked, or worn foam insulation on the freezer door interior panel.

Seals your refrigerator door to maintain temperature and reduce energy loss. Replace when worn, cracked, or causing frost buildup. Confirm fit with model.

Restore a tight door seal and prevent air leaks with this refrigerator door gasket. Replace when you notice frost buildup, condensation, or warm temps inside. Confirm fit with your model number.

Cover cap for bottom-mount refrigerators. Conceals screws or mounting points on interior or exterior surfaces. Replace if cracked, broken, or missing.

Refrigerator cover cap conceals screws or fasteners for a finished appearance. Replace if cracked, broken, or missing to restore clean look.

Plastic cover cap for refrigerators. Snaps onto shelves, hinges, or trim to conceal screws and mounting hardware. Replace if cracked, broken, or missing.

Decorative door trim handle for refrigerator doors. Replaces scratched, cracked, or worn trim pieces to restore a finished look and easier grip.

Decorative trim cover that fits over your refrigerator door handle. Replace if cracked, discolored, or missing to restore your handle's appearance.

Replaces damaged or missing hinge cover trim on your refrigerator. Restores clean appearance and prevents items from catching on exposed hinge area.

Replace a cracked, loose, or missing freezer door handle on your bottom-mount refrigerator. Restores secure grip and factory appearance to the door.

Replacement name plate for your bottom-mount refrigerator. This label attaches to the exterior and displays model information. Needed when original is faded, peeling, or missing.

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

Door sweating or poor cooling? This door foam insulation assembly restores the insulating core to reduce heat transfer and maintain temperature consistency.

Door foam assembly installs inside the refrigerator door to provide insulation. Replace if foam is cracked, deteriorated, or missing to restore energy efficiency.

Seals the refrigerator door to keep cold air in and warm air out. Replace if worn, torn, or moldy to restore proper temperatures and efficiency.

Restores your refrigerator's exterior appearance and protects internal components. Replace when cracked, dented, or missing to maintain proper seal. Confirm fit with your model number.

Refrigerator drawer tray assembly that holds items in the fresh food or crisper drawer. Replace if cracked, broken, warped, or missing from your unit.

Replaces a cracked, broken, or missing door bin on your refrigerator's fresh food compartment. Snaps into molded slots to hold condiments and jars.

Replaces a cracked, broken, or missing door bin on your refrigerator's fresh food compartment. Snaps into molded slots to hold condiments and jars.

Replaces a cracked, broken, or missing door bin on your refrigerator's fresh food compartment. Snaps into molded slots to hold condiments and jars.

Refrigerator door shelf bin installs on the refrigerator door for storing condiments and beverages. Replace if cracked, broken, or damaged.

Replacement door shelf bin for refrigerator doors. Holds bottles, jars, and condiments. Replace if cracked, broken, or damaged. Installs on door interior.

Door stopper assembly for bottom-mount refrigerators. Installs on door to limit opening range. Replace if cracked, broken, or missing for proper fit.

Door stopper assembly for bottom-mount refrigerators. Prevents door from swinging too far or slamming. Replace if cracked, broken, or missing.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

The Lower Refrigerator Door Hinge is an OEM part for LG refrigerators, designed to support and pivot the refrigerator door, allowing it to open and close smoothly. This hinge is a critical component for the proper alignment and function of the door, ensuring an airtight seal when closed to maintain the internal temperature and efficiency of the refrigerator.

Causes of damage to the lower refrigerator door hinge often include normal wear and tear, excessive force when opening or closing the door, or corrosion due to moisture and cleaning agents. 

Symptoms of a bad Lower Refrigerator Door Hinge include:

• Difficulty in opening or closing the refrigerator door.
• A door that hangs unevenly or does not close properly
• Unusual noises during door operation 
• Visible wear or damage to the hinge itself.

This OEM LG part is also compatible with some Kenmore models.

Replace your refrigerator's broken, cracked, or worn door handle assembly. Restores proper grip and door operation. Direct fit for select models.

This connector rail is a small replacement connector used to join or secure the wiring/harness along the appliance rail, helping maintain proper electrical routing and stable connections for reliable operation. What it does:

• Provides a secure connection point along a mounting rail to keep wiring harnesses routed and supported
• Helps prevent wires from snagging, rubbing, or becoming disconnected during use or door movement
• Reduces strain on terminals and harness ends by keeping wiring aligned and restrained
• Commonly replaced when cracked, broken, or when the connector no longer holds the harness securely

• One connector rail

• Disconnect power to the appliance before inspecting or replacing wiring components
• Replace only the listed connector;
• Use basic hand tools and avoid stretching or pinching the harness when installing
• If you find damaged wiring or terminals, repair or replace those parts before restoring power

Slide rail that guides and supports refrigerator drawers for smooth opening and closing. Replace if worn, bent, cracked, or causing noisy operation.

Restores smooth drawer operation in your refrigerator. Replace when drawers stick, sag, or don't glide properly. Verify fit with your model number.

Decorative cover cap for bottom-mount refrigerators. Replaces cracked, broken, or missing caps on door handles, hinges, or trim areas.

Replacement door bar for bottom-mount refrigerators. Installs on the interior door to hold items in place. Order a new one if cracked or broken.

Wire harness assembly for bottom-mount refrigerators. Connects electrical components throughout the unit. Replace if wires are damaged or frayed.

Ice maker won't eject ice cubes? This drive gear transfers motor power to rotate the ejector arm and harvest ice. Simple repair restores ice production.

Ice maker grinding or not ejecting cubes? This gear drives the ejector blades to push ice from the tray into the bin. Restores harvest cycles quickly.

Refrigerator not responding to controls or components not working? This wire harness assembly restores electrical connections between the control board and parts.

Replace a cracked or broken cover support bracket in your bottom-mount refrigerator. Secures the internal cover panel in place. Direct fit part.

Center hinge assembly for bottom-mount refrigerators. Installs between freezer and fresh food doors. Replace if cracked, broken, or worn out.

Secures components inside your refrigerator. Replace if broken or missing to prevent rattling and ensure proper part alignment. Confirm fit with model.

The Spanner Wrench is an OEM replacement part for LG refrigerators. This tool allows you to adjust the door hinges to ensure the doors are level and aligned properly. A well-aligned door is crucial for maintaining the internal temperature and efficiency of the refrigerator, preventing energy loss and ensuring food is stored under optimal conditions.

Symptoms that you might need to adjust the door hinges and potentially need this wrench include:

• Doors not closing properly or sealing tightly
• Visible gaps between the door and the main body of the refrigerator
• The refrigerator tilting or not sitting level

This spanner wrench is also compatible with some Sears/Kenmore refrigerators. 

Handle bar for bottom-mount refrigerator doors. Replaces cracked, broken, or missing handle bars. Installs on door exterior for secure grip.

Secures and aligns your refrigerator door for smooth opening and proper sealing. Replace if door sags or closes unevenly. Verify fit with your model number.

Secures and aligns the top refrigerator door for smooth opening and proper sealing. Replace when door sags or won't close properly. Verify fit with your model.

Ice freezing in chute or water dripping from dispenser? This ice dispenser door assembly restores proper sealing. 15-minute DIY repair with video guide.

This lever holder is the replacement mounting bracket that secures the door lever so the microwave door operates smoothly and reliably. It restores proper lever alignment to help the door latch and release as intended. What it does:

• Secures the door lever assembly so the door can latch and release properly
• Keeps the lever aligned to prevent binding, sticking, or loose movement
• Helps restore normal door operation and user access to the oven cavity
• Common symptom: door feels loose, lever moves freely, or door will not latch

• Disconnect power before beginning any repair to avoid shock or injury
• Remove the outer cabinet or door trim only as needed to access the lever area
• Handle door components and glass carefully to avoid damage or injury

This holder bracket secures internal refrigerator components in place. Replace if your original bracket is cracked, broken, or missing to restore stability.

Ice dispenser door spring maintains tension for smooth opening and closing of the ice compartment door. Replace if door won't seal or spring shows wear.

Secures the dispenser lever in place on your refrigerator. Replace if retainer is cracked, broken, or missing to restore proper lever stability.

Spring that tensions the ice dispenser door for proper closing and airtight seal. Replace if door won't close or ice gets stuck. Verify fit with model.

Fix dispenser drips and spills with this refrigerator dispenser funnel. Guides water flow cleanly to prevent messes. Simple 5-minute installation.

Ice stuck in dispenser door or won't dispense? This ice dispenser door lever controls ice release. DIY repair in under 15 minutes with video guide.

Dispenser cover not closing properly or cracked? This refrigerator dispenser cover protects internal components. Moderate DIY repair in 30-45 minutes.

Protective cover for refrigerator control panel display. Replaces cracked, scratched, or missing covers that expose electronics or detract from appearance.

Control buttons not responding or cracked? This button assembly restores full control panel function on bottom-mount refrigerators. Moderate DIY repair.

Display cover assembly for refrigerator control panel. Replaces cracked, scratched, or broken display covers. Full assembly includes front cover and backing.

Replaces a broken, cracked, or missing water dispenser button on your refrigerator. This snap-on part installs on the dispenser housing panel.

Refrigerator not cooling or freezer warm? The compressor assembly circulates refrigerant to maintain temperature. Professional installation recommended.

Refrigerator not cooling or freezing over? This evaporator assembly circulates refrigerant to absorb heat and restore proper temperatures in your fridge.

This evaporator assembly replaces the freezer evaporator coil and housing to restore proper cold-air circulation and frost control in the freezer compartment. It helps re-establish normal cooling and defrost performance when the evaporator is damaged or leaking. What it does:

• Contains the evaporator coil and housing that absorb heat from the freezer compartment
• Enables proper airflow and heat transfer for consistent freezer temperatures
• Restores defrost cycle effectiveness when a cracked or corroded evaporator causes frost build-up
• Addresses symptoms like excessive frost/ice on the coil, reduced cooling, or water leaking inside the freezer

• Disconnect power to the appliance before starting any repair; follow manufacturer safety instructions
• Replacement typically requires removing interior liners and thawing any ice; handle fins and tubing carefully to avoid damage
• Use proper sealing/insulation when reinstalling the housing to prevent air leaks and frost issues

Vibration-isolating grommet that mounts between the compressor and chassis. Replace if cracked, worn, or missing to restore proper cushioning.

Water pooling inside your refrigerator? This drip tray collects condensate and defrost water to prevent leaks. Direct-fit replacement part.

Fixes uneven cooling and scraping noises by directing airflow from the fan. This guide restores proper air circulation throughout your refrigerator.

Fixes warm or cool spots in your refrigerator. This fan guide assembly directs proper airflow in the compartment. Compatible with multiple models.

Refrigerator not cooling or making unusual noises? This compressor sealing pipe restores proper refrigerant flow. Moderate difficulty repair part.

Protective front cover panel for refrigerators. Installs on the exterior to conceal components. Replace if cracked, broken, or missing.

Refrigerator making unusual grinding noises or exposed machinery? This machinery cover assembly shields internal components from debris and damage.

This is a small retainer clip that secures the compressor in place at the base of the refrigerator. It helps prevent the compressor from shifting or vibrating excessively during operation. Replace this clip if your refrigerator produces unusual rattling or vibrating noises from the back, or if the compressor appears loose or has shifted from its mounting position.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.

This holder is a small mounting bracket used to secure internal components in place, helping keep parts aligned and stable for reliable operation. It provides a direct, OEM-compatible replacement to restore proper fit and function. What it does

• Secures and supports nearby components to prevent shifting or vibration.
• Restores proper alignment where a worn or broken holder causes rattling or loose parts.
• Helps maintain normal operation by keeping assemblies seated correctly.
• Works behind panels or inside assemblies where a dedicated bracket is required.

• One holder/mounting bracket as shown.

• Installation generally requires removing the panel or access cover where the holder is located.
• Use proper fasteners shown in your appliance; replace any damaged screws or clips as needed.
• Disconnect power before servicing electrical appliances to reduce shock risk.

The Fan Assembly is an OEM part for LG refrigerators. It is responsible for circulating air within the refrigerator and freezer compartments, ensuring consistent cooling and optimal temperature distribution. The fan assembly helps maintain the freshness of your food by evenly distributing cold air.

Common causes of a bad fan assembly include electrical issues, worn-out bearings, or obstructions that prevent the fan from spinning properly.

Symptoms of a bad fan assembly include:

• Unusual noises coming from the refrigerator
• Inconsistent temperatures within the fridge or freezer
• Frost buildup in the freezer
• Refrigerator running continuously or not cooling effectively

This OEM LG part is also compatible with Sears/Kenmore models.

If your refrigerator light stays on or interior won't cool properly, the door switch may have failed. This magnetic switch detects door position.

Fix a dispenser that won't stop running or fails to dispense ice or water. This switch activates your dispenser when pressed. DIY-friendly repair.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

Fix uneven cooling or noisy fan operation with a new circulation fan motor. This DC motor restores proper airflow across coils. Moderate DIY repair.

The Motor Assembly is an OEM part for LG refrigerators. It houses the condensing fan motor that circulates cold air within the refrigerator compartment. 

This motor assembly is responsible for actively distributing cool air to all areas of the refrigerator and freezer sections. The fan motor ensures maintained temperatures by dispersing cold air as needed based on sensor input data. 

Symptoms of a bad motor assembly include:

• Inconsistencies in interior temperatures  
• Warm spots developing inside refrigerator shelves
• Strange noises coming from the rear wall
• The fan motor fails to start or run intermittently

Replacing the motor assembly with this genuine OEM LG part restores proper airflow circulation. It is also compatible with Sears/Kenmore refrigerator models.

Fix a refrigerator not cooling properly or displaying ER RF codes with this evaporator fan motor. Ensures even cooling throughout your fridge. DIY repair.

Replace your refrigerator's shroud cover if it's cracked, broken, or missing. This protective cover installs over internal components to provide a clean finish.

Fix unusual noise or vibration from your refrigerator with this motor bracket. Secures the motor assembly for quiet operation. DIY-friendly repair.

Replace a damaged or broken motor cover in your refrigerator. This protective cover shields the motor assembly from dust and debris. Simple repair.

Protects your refrigerator's light bulb from moisture and damage. Replace if cracked, discolored, or broken to maintain proper lighting and safety.

Cracked or missing light cover causing dim fridge lighting? This interior light lens protects the bulb and restores even illumination. Easy 5-minute fix.

The Rear Evaporator Motor Grommet is an OEM part for LG refrigerators. It's designed to secure and cushion the evaporator motor, ensuring it remains in place and operates quietly. This grommet plays a crucial role in minimizing vibrations and noise from the motor, which can otherwise lead to a disruptive refrigerator operation.

Causes of a bad Rear Evaporator Motor Grommet can result from deterioration due to cooling and thawing cycles in the refrigerator. Physical damage during cleaning or servicing may cause a loose motor fit.  

Symptoms of a malfunctioning Rear Evaporator Motor Grommet include:

• Unusual noises or vibrations from the back of the refrigerator.
• The evaporator motor shifting out of place, which can affect cooling efficiency.
• Increased wear on the evaporator motor due to lack of proper cushioning and support.

This OEM LG part is also compatible with some Kenmore models.

This is a rubber or elastomer damper that supports and isolates the evaporator fan motor inside the refrigerator. It absorbs vibration from the motor to reduce noise during normal operation. Replace this part if you hear excessive buzzing, rattling, or vibration coming from the freezer section, which often indicates the damper has hardened or deteriorated.

The Ice Dispenser Door Motor is an OEM part for LG refrigerators. This motor is responsible for the operation of the ice dispenser door, controlling its opening and closing mechanism to allow ice to be dispensed without letting warm air into the freezer. 

Symptoms of a bad Ice Dispenser Door Motor include:

• The dispenser door not opening or closing properly,
• Ice not being dispensed when activated,
• Unusual noises coming from the dispenser mechanism.

Causes of ice dispenser door motor failure can include electrical issues such as shorts or wiring problems, mechanical wear over time, or blockages that strain the motor.

This OEM LG part is also compatible with Sears/Kenmore.

Rail connector for refrigerator drawers. Secures and aligns drawer rails to the cabinet frame. Replace if cracked, broken, or missing for proper support.

Connector piece that joins drawer rail sections in your refrigerator. Replace if cracked, broken, or missing to properly support and align drawers.

Interior light won't turn off when door closes? This refrigerator door switch cover protects and aligns the switch for proper operation. Simple DIY fix.

The Fan Motor Assembly is an OEM replacement part for LG refrigerators. This 4-wire fan motor is responsible for circulating air within the refrigerator and freezer compartments, helping to maintain even temperatures and prevent cold spots. Note: This fan motor has a smaller secondary wire harness with a 4-wire connector. If your unit has a 3-wire connector, order part# ABA72913421.

Causes of fan motor failure can be normal wear and tear over time, a break or short in one of the motor wires, or blockage preventing free movement of the fan blades.

Symptoms of a bad fan motor include:

• Inconsistent or elevated temperatures within compartments
• Increased humidity leading to frost or condensation buildup
• Strange noises emanating from the fan motor area
• The fan failing to spin or rotate properly

This OEM LG part is also compatible with some Sears/Kenmore models. 

This is the defrost heater assembly located in the fresh food compartment of the refrigerator. It generates heat during the defrost cycle to melt frost buildup on the evaporator coils, allowing proper airflow and cooling. Replace this heater if you notice excessive frost buildup, the fresh food section is too warm, or the refrigerator is not cooling properly despite the compressor running.

This is a sheath-style heating element located in the refrigerator's evaporator section that melts frost buildup during the automatic defrost cycle. It prevents ice from accumulating on the evaporator coils, which would restrict airflow and reduce cooling performance. Replace this heater if your refrigerator is not cooling properly, frost is building up excessively on the back wall or evaporator, or the defrost cycle is not completing.

LED light assembly for bottom-mount refrigerators. Installs inside compartment to illuminate interior. Replace when cracked, dim, or not illuminating.

Replaces worn LED backlight strip in your refrigerator display. Restores screen brightness and clarity when images appear dim or uneven. Verify fit with your model number before ordering.