Parts for Ge JP930TB1WW: 01 - Section1 Parts

Fix a burner stuck on high heat or with no temperature control by replacing the infinite switch. Straightforward DIY repair—remove cooktop screws.

1200W Element Control

Burner stuck on high or can't regulate heat? This infinite switch controls cooktop element temperature. DIY-friendly repair in under an hour.

This part is a replacement control knob. This is knob is manufactured by General Electric and is a genuine OEM part that has been sourced directly from the manufacturer. This part is intended to replace a defective or misplaced knob on certain makes of ranges, stoves, and ovens. A misplaced control knob or one that is not functioning correctly can prevent accurate temperature control or stop the appliance from turning on or off. This knob features a double flat shaft and requires no tools for replacement. Please follow appropriate safety precautions and always ensure the stove is disconnected from both gas and power hookups before starting the replacement process. For more accurate information on how and where to install this replacement knob, it is recommended that the appropriate manufacturer diagrams or owner's manual are referenced. As an authentic replacement part, this knob can be used on multiple different models of ranges, stoves, and ovens manufactured by General Electric and Hotpoint. Please note that this replacement knob is a genuine part made of high-quality, durable materials and is sold individually.

Replace your range indicator light when it fails to illuminate. Shows when burners or oven functions are active for safety. Verify fit with your model number.

Oven won't change modes or burner won't heat? The selector switch routes power to cooking functions. Moderate DIY repair with video guidance available.

This hold-down bracket secures a designated component inside your appliance, keeping it firmly anchored during use. Replace a bent, broken, or missing bracket to stop movement and rattling and restore proper alignment and a stable, factory fit. What it does:

• Anchors the specified part to the appliance frame/cabinet to prevent shifting
• Reduces vibration and rattling noises during operation
• Helps maintain correct alignment and spacing for reliable performance
• Replace if the bracket is bent, cracked, corroded, or missing

• 1 hold-down bracket

• Disconnect electrical power; for gas appliances, also shut off the gas supply
• Note the original orientation and screw locations before removal (a quick photo helps)
• Reuse existing mounting hardware unless your model specifies new fasteners
• Do not overtighten; verify the secured component is aligned and stable before restoring power

1200 watts

Replace a dual radiant element that won't heat, heats unevenly, or stays on when turned off. Compatible with many glass cooktops. Video guide included.

The Radiant Element is an OEM part for GE ranges and cooktops. This part provides efficient and even heating for cooking. This part uses electricity to heat up and transfer warmth directly to the cookware. The radiant element is encased under the glass surface of the cooktop, offering a sleek and easy-to-clean cooking area while ensuring optimal heat distribution and cooking performance.

Causes of failure might include a burnt-out heating coil, damage to the element's electrical connections, or a malfunction within the control system that regulates power to the element.  

Symptoms of a bad Radiant Element include:

• The element not heating up, leading to insufficient cooking temperatures.
• Uneven heating, causing inconsistent cooking results.
• The cooktop surface not responding or only partially heating, indicating a possible failure in the element's circuit.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Burner box bottom assembly for cooktops. Mounts beneath burners to contain heat and support components. Replace if cracked, warped, or corroded.

Mounting bracket that secures the radiant element to your cooktop. Replace if bracket is bent, broken, or missing to properly support the heating element.

Replacement mounting stud for cooktops and ranges. Secures the cooktop assembly to the cabinet or countertop. Replace if broken, stripped, or missing.

Mounting plate that secures and supports the wiring harness in your cooktop. Replace if cracked, broken, or missing to properly secure electrical connections.

ST10-16 X 7/16"

Mounting screw for ranges and ovens. Secures panels, brackets, or internal components. Replace if stripped, missing, or damaged during repair work.

Replacement screw for securing panels, brackets, and internal components in ranges, ovens, and cooktops. Replace missing, stripped, or damaged screws.

Replacement mounting screw secures panels, brackets, and controls on ranges and ovens. Needed when original screws are missing, stripped, or damaged.

Package of 12

Black. 8-18 AB HXW 3/8

This flat washer (.250 inch inner diameter x .812 inch outer diameter) is a simple replacement part that helps distribute load from a fastener and protects mating surfaces for reliable appliance operation. What it does:

• Provides a stable bearing surface for screws, bolts or studs to reduce wear on parts
• Helps distribute clamping force to prevent pull-through or deformation of softer materials
• Reduces vibration and movement at the joint when installed correctly
• Missing or damaged washers can lead to loose fasteners, increased vibration or component misalignment

• Disconnect power and water before servicing the appliance
• Replace like-for-like: inner/outer diameters and thickness match the original washer
• Inspect mating hardware and surfaces for damage; replace corroded or deformed fasteners as needed
• Tighten fasteners evenly and avoid over-torquing to prevent washer or component damage

This replacement harness wire indicator assembly connects and routes wiring for the appliance's indicator circuit, restoring reliable electrical connections for indicator lights and related controls. What it does:

• Replaces a damaged or worn indicator wire harness to restore proper electrical routing.
• Provides secure connector interfaces for indicator lights or control signals.
• Helps stop intermittent or non-working indicator lights caused by broken or corroded wiring.
• Keeps wiring organized and positioned to reduce chafing and accidental shorts.

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Match connector shapes and pin positions — do not force connectors.
• Handle wiring and connectors gently; secure the harness along original routing and clips.

Replace your dull, broken, or missing cooktop scraper blade. This cleaning tool blade removes baked-on food and residue from glass cooktop surfaces.

Specially formulated cleaner for ceramic glass and smooth cooktops. Removes cooked-on food, grease, and spills without scratching. Verify fit by model.