Inglis Parts

Best Seller

Genuine Whirlpool part

Inglis Washer Drive Belt

By: Whirlpool

Part Number: WPW10006384

The washer drive belt transfers motor power to the washer’s drive system so the basket spins and agitates. Replacing a stretched or broken belt helps stop squealing and slipping so cycles finish at proper spin speed.

What it does

Links the drive motor to the washer’s drive/pulley system
Restores spin and agitation when the belt is worn, glazed, or broken
Can reduce squeal or burning-rubber smells from belt slip
Helps prevent intermittent or no-spin conditions

What’s included
One drive belt.

Install notes

Unplug power; turn off water
Tip the washer back; remove the bottom shield/cover if present
Route the belt over the motor and drive pulleys; rotate by hand to seat fully
Inspect pulleys/drive parts for wear; run a spin or calibration test after install

This OEM Whirlpool belt is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.

Do-It-Yourself Stories from Customers like You Whirlpool Cabrio washer made a loud noise during the spin cycles it also was very noisy while washing Ralph N. • Spring , TX • October 25, 2018

This was my first attempt, ever, to repair a washing machine. After some internet research on the problems, I was able to determine that the shaft seal on the gearcase probably was leaking water into the gearcase with each use. No water was ever found on the floor, but when I turned the washer over to inspect the gearcase, I found a black, oily residue on the outside of it along with the same residue on the pulleys, the belt and the motor. I ordered a new gearcase, shift actuator, splutch... Read more

$28.26

Compare At:: $33.63
You Save:: $5.37

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Inglis Drum Support Roller

4.8 (215)

By: Whirlpool

Part Number: WPW10314173

The Drum Support Roller is an OEM replacement part for Whirlpool dryers. It plays a crucial role in supporting and facilitating the smooth rotation of the dryer drum during the drying cycle.

Symptoms of needing to replace the drum support roller include:

Excessive noise or grinding sounds coming from the dryer drum
Difficulty in rotating the drum or drum not turning at all
Visible signs of wear, cracking, or damage on the existing roller(s)
Increased vibrations or shaking during the drying cycle

Causes of a faulty drum support roller can include normal wear and tear over time, exposure to excessive heat or lint buildup, or physical damage due to impact or overloading.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.

Do-It-Yourself Stories from Customers like You The dryer drum would barely turn. James R. • Minden , NV • December 09, 2022

I watched videos on the disassembly of my dryer model, and got the model number hiding on the upper dryer door jamb. After calling AppliancePartsPros.com for help, then ordered parts with the help of APP. It took almost a full day to disassemble the dryer I have, as it is a little more complicated than some models, and I went very slowly on purpose to not lose screws, or break plastic parts. Getting the wiring harness apart was the hardest thing to do, as the screwdriver shown in the video... Read more

$18.95

Compare At:: $22.36
You Save:: $3.41

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Inglis Medium Cam Agitator Repair Kit

4.9 (763)

By: Whirlpool

Part Number: 285811

The medium cam agitator repair kit is an OEM part for Whirpool washers. It includes 4 agitator dogs, a medium length cam, a cap seal, a washer for the agitator bolt, and a thrust washer.

Symptoms of a bad part:

The agitator not working or turning
Loud grinding or clicking noises during the wash cycle
Clothes not being thoroughly cleaned or rinsed

Causes of a faulty agitator system can include normal wear and tear over time, exposure to excessive loads or unbalanced loads, or physical damage due to impact or mishandling.

Whirlpool recommends using a small amount of grease with this kit (if no grease is present on the old thrust washer). For the Whirlpool agitator grease, order 350849. For the long cam, order 285748. For the short cam, order 285809.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Whirlpool lsr7233eq0 washing machine was leaking out the bottom Jerald F. • Laud Lakes , FL • April 05, 2015

I had previously replaced the pump about 1 year ago. That was not the problem. Still leaked the same way - intermittently, but always in the center of the washer onto the floor. None of the hoses were leaking - no evidence of corrosion or water mineral residue at any of the hose fittings. So, it must have been something else. I studied the parts diagram for the washer tub assembly and concluded the source of the leak almost had to be the outer tub's Centerpost Gasket. It was really the... Read more

$20.95

Compare At:: $25.14
You Save:: $4.19

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Inglis Dryer Drive Motor

4.9 (239)

By: Whirlpool

Part Number: 279827

The Dryer Drive Motor is an OEM part for Whirlpool dryers. This motor is the heart of the dryer, responsible for turning the drum and enabling the air to circulate properly throughout the machine.

Over time, dryer motors can suffer from wear and tear due to continuous use, accumulation of lint and debris, or overload from heavy laundry loads. These factors can lead to the motor overheating, losing power, or failing to start altogether.

Symptoms of a bad Dryer Drive Motor include:

The dryer not starting when the start button is pressed
Unusual noises, such as humming or buzzing
The dryer stopping unexpectedly during cycles
A burning smell coming from the dryer

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Will not tumble
Noisy
Shuts off too soon

Do-It-Yourself Stories from Customers like You High pitched squeal: maybe a roller wheel maybe a bad felt bearing on drum maybe a rubbing fan wheel or just a burned out motor! Bruce K. • Pikeville , KY • September 06, 2014

My 12 year old Kenmore dryer problem started about 3 years ago with the motor just stopping. My thing was: I would turn it off and turn the drum by hand about halfway around and it would work again. Last month, my wife said it stopped again and its making a loud noise, but when I did "my thing" it still made a loud squealing noise (like I was killing a mouse). I made time to work on it the next day, I took it apart, using the video instructions from AppliancePartsPros, I removed the top,... Read more

$97.95

Compare At:: $131.61
You Save:: $33.66

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Inglis Suspension Rods

4.8 (108)

By: Whirlpool

Part Number: W10780045

The Suspension Rods are OEM parts for Whirlpool washing machines. They are designed to support the washer's tub assembly, maintaining balance and stability during the spin and agitation cycles. These rods connect the tub to the washer's frame and help absorb vibrations, preventing excessive movement that can lead to operational issues.

Symptoms of bad Suspension Rods include:

Unusual vibrations or shaking during the wash cycle.
The washing machine "walking" or moving across the floor.
Loud banging noises, especially during high-speed spins.
The tub sagging or tilting more than usual when loaded.

Causes of bad suspension rods can include wear and tear from normal use, stress from unbalanced loads, or degradation of the material properties over time.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Washer shook uncontrollably during spin cycle unit about 4 years old. John H. • Nauvoo , IL • September 26, 2017

Replaced suspension springs/rods and all associated bushings in the kit. Read more

$72.55

Compare At:: $87.89
You Save:: $15.34

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Inglis Lid Lock Assembly

4.9 (117)

By: Whirlpool

Part Number: W11307244

The lid lock is an OEM replacement part for Whirlpool washers. It is designed to keep the door securely closed during operation.

Symptoms of a faulty lid lock:

Washer will not start
Washer stopping randomly during operation
Lid will not lock

By replacing the latch, you can restore door closure and prevent interruptions in your washer's operation. Improve your washer's safety and efficiency with this durable Lid Lock Assembly.

This latch can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Please note: The part might arrive in the locked position. Install the lid lock and power up your washing machine to reset the lock to the open position.

Do-It-Yourself Stories from Customers like You The washer would not go into spin mode only partial wash and drain Karen T. • Dearborn Heights , MI • August 11, 2017

The part is so new no video so I went onto a similar part and watched video that got me about 80%. Then, called and customer service sent me a service Manual but this still was not specific so I broke the old to get it out and in the process figured out how to do it correctly. So I installed the last bit of it which was the bezel through the machine top by myself correctly. So you take the old one out by pushing out to the right from the bottom side using a screw driver for leverage. It will... Read more

$97.50

Compare At:: $115.05
You Save:: $17.55

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Inglis Moisture Sensor Bar

4.9 (173)

By: Whirlpool

Part Number: WP3387223

The Moisture Sensor Bar is an OEM replacement part for Whirlpool dryers. It is a component located inside the dryer drum that senses the moisture level of clothes during tumble drying cycles. The moisture sensor bar utilizes sensors or probes to gauge how dry clothes are getting and signals the dryer to shut off once clothes reach the desired dryness level selected by the user.

Symptoms of a bad moisture sensor bar include:

Dryer failing to shut off automatically at the end of cycles, leaving clothes over-dried
Cycles taking excessively long to complete
Dryer not sensing moisture levels properly to allow automatic ending of cycles

Causes of a faulty moisture sensor bar are usually due to normal wear and tear over time. Dust or lint buildup can also affect its ability to provide accurate readings.

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You First longer to dry then no heat in dryer Bobbie M. • King George , VA • October 06, 2017

I am not an electrician, just a housewife with limited funds and a desire to DIY. I used the provided videos for knowing how to replace everything except the heating element which I just guessed based on other reviews and seeing how the other parts worked. Our dryer is 11 years old Whirlpool Gold HE and I have only ever cleaned the lint tray. My husband replaced the belt about five years ago and he did clean out the inside of the dryer. Started by ordering a thermal fuse because it was... Read more

$9.95

Compare At:: $11.74
You Save:: $1.79

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Inglis Idler Pulley

4.9 (390)

By: Whirlpool

Part Number: 279640

The Idler Pulley is an OEM replacement part for Whirlpool dryers. This essential component plays a crucial role in the drum drive system, helping to guide and maintain proper tension on the dryer belt.

Causes of a faulty idler pulley in a dryer can include normal wear and tear over time, improper belt tensioning leading to bearing failure, or physical damage from impact or debris buildup.

Symptoms of needing to replace the idler pulley include:

Squeaking or grinding noises from the driveability area
The dryer drum not spinning or rotating properly
Excessive vibration or shaking during the dryer cycle

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.

Do-It-Yourself Stories from Customers like You I had no error code, it is just that when you press start you would hear a click and no actions. Nicholas M. • Miami , FL • June 12, 2020

It was the day of my birthday June 6th when my wife came to me to tell me that the dryer was not working. Immediately I started to look for a new dryer from Best Buy and the rest. Then I said It would be better if I waited for 4th of July at which time I could find a better deal. This is when I decided to take it apart to see what was wrong. Initially, I thought of the belt that could be broken and I rotated the drum by hand and I heard a noise of the belt at times falling on the drum. I was... Read more

$25.95

Compare At:: $31.14
You Save:: $5.19

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Inglis Felt Drum Seal

4.8 (213)

By: Whirlpool

Part Number: W10612022

The Felt Drum Seal is an OEM part for Whirlpool dryers. This part creates a tight seal along the edge of the dryer drum, preventing hot air from escaping and ensuring efficient operation. The felt seal helps to minimize noise and vibration during the drying cycle by cushioning the space between the drum and the dryer body.

Over time, the felt drum seal can wear out, become compacted, or tear, leading to potential issues such as increased drying times, higher energy consumption, and excess noise.

Symptoms of a bad Felt Drum Seal include:

Clothes taking longer to dry
Unusual noises or increased vibration during operation
A visible gap between the drum and the dryer body
Excessive lint buildup inside the dryer beyond the lint trap

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This part fixes the following symptoms

Marks left on clothes

Do-It-Yourself Stories from Customers like You Gas dryer did not heat and excessive lint inside the unit James C. • New Boston , MI • July 20, 2017

Our 19 year old Whirlpool dryer quit heating. After checking the thermal fuse, I found the ignitor electrically open. I bought an ignitor at a local store as there was a national holiday the next day and I did not want the dryer inoperative waiting several days for shipping. I can say AppliancePartsPros is MUCH cheaper for the identical Whirlpool genuine part. While changing the ignitor, I noticed there was an excessive amount of lint in the dryer, which was caused by worn drum seals. I ordered... Read more

$40.95

Compare At:: $48.73
You Save:: $7.78

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Inglis Lid Latch Assembly

4.9 (335)

By: Whirlpool

Part Number: W10404050

The Lid Latch Assembly is an OEM part for Whirlpool washing machines. It ensures that the washer lid is securely locked during operation, preventing it from being opened mid-cycle, which could cause water spills and interrupt the washing process. This component plays a vital role in the safety and functionality of the washing machine by ensuring that the lid remains closed during washing and spinning cycles.

Causes of a bad lid latch assembly can include regular wear and tear, electrical failures, or physical damage from forcefully opening or closing the lid. When the lid latch assembly is faulty, it can affect the washer's ability to start or complete a cycle properly.

Symptoms of a bad Lid Latch Assembly include:

The washer not starting or stopping mid-cycle
Error codes related to lid lock issues
The lid not locking or unlocking properly
The washer pausing unexpectedly during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Lid or door won't close
Won't start

Do-It-Yourself Stories from Customers like You My Maytag bravos mct (Maytag commercial technology) model # mvwx500bw0 washer was not agitating properly and was not spinning at all Mark P. • Mundelein , IL • October 14, 2020

Not wanting to spend hundreds of dollars on an appliance technician's service call, I searched online to troubleshoot the problems with my particular Maytag Washer Model Number MVWX500BW0. I stumbled across AppliancePartsPros.com and investigated there the most likely causes for my Maytag Washer's not agitating properly and not spinning at all. In order to acquire some additional information, I telephoned AppliancePartsPros.com and spoke with an extremely professional, knowledgeable and helpful... Read more

$48.95

Compare At:: $57.76
You Save:: $8.81

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Inglis Dryer Door Handle

4.9 (204)

By: Whirlpool

Part Number: W10861225

The Dryer Door Handle is an OEM replacement part for Whirlpool dryers. This component serves as the primary point of contact for opening and closing the dryer door, allowing easy access to load and unload laundry.

Symptoms of a faulty dryer door handle include:

Difficulty in opening or closing the dryer door
Loose or wobbly handle movement
Handle becoming detached or falling off

Causes of needing to replace the dryer door handle can include normal wear and tear over time, physical damage from impact or mishandling, or issues with the handle's mounting points or attachment mechanisms.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.

Do-It-Yourself Stories from Customers like You The handle on the dryer drawer broke it was cheaply made in my opinion. Julie L. • New Lebanon , OH • April 21, 2017

I easily ordered the part, and it arrived the next day! All I had to do was snap it in. So very easy!! Read more

$48.95

Compare At:: $58.25
You Save:: $9.30

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Inglis Drum Felt Seal

4.8 (105)

By: Whirlpool

Part Number: 280114

The Dryer Drum Felt Seal is an OEM replacement part for Whirlpool electric dryers. Located inside the spinning dryer drum, it lines the perimeter and protects the interior surface from abrasions. This seal measures approximately 82 inches in length.

Symptoms of a bad dryer drum felt seal include:

Scratches or scuff marks visible on the inside of the drum
Visible wear patterns or thinning of the felt material
Premature rusting or corrosion of the steel drum
Chipped or delaminated areas exposing bare steel

Causes of failure can include normal wear from friction generated during high-speed spins. Mineral deposits and grit trapped between the seal and drum may accelerate wear over extended use as well.

This OEM part is also compatible with brands like Maytag, Amana and Kenmore.

This part fixes the following symptoms

Marks left on clothes

Do-It-Yourself Stories from Customers like You Dryer squealed when first started & my wife noticed a piece of clothing getting caught in front seal Dale M. • Peshtigo , WI • January 02, 2018

Maytag Gas Dryer Model: MGDE300VW1 I had previous experience with repairing my dryers, but this was a first for this model. Instructional videos very helpful. Ordered necessary parts and they were delivered with-in two days. Wow! Squeak found to be coming from idler pulley roller which no longer turned freely . The four other cabinet rollers had signs of wear. Dryer belt had frayed edges and a couple of burn spots in the belt from the motor turning before the drum did. Cleaned up all shafts... Read more

$42.95

Compare At:: $51.11
You Save:: $8.16

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Inglis Complete Agitator Assembly

5.0 (80)

By: Whirlpool

Part Number: 285565

The Complete Agitator Assembly is an OEM part for Whirlpool washing machines. This assembly includes the central vertical agitator component along with the retainer ring. Together they are responsible for the agitation and rubbing motions that work to remove soils and stains from clothing during wash cycles.

Causes of a bad agitator assembly can include wear and tear leading to wobbly or loose motions, cracks in plastic components from repeated impacts, or corrosion of metal components.

Symptoms of a bad complete agitator assembly include:

Vibration or shaking issues during agitation
Improper or lack of agitating of clothes
An agitator that is difficult to rotate by hand
Cracks, missing pieces or corrosion visible upon inspection

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The agitator didnt work Robert B. • Fort Lauderdale , FL • September 19, 2014

Installed new agitator Read more

$145.24

Compare At:: $172.84
You Save:: $27.60

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Inglis Blower Wheel

4.8 (130)

By: Whirlpool

Part Number: WP694089

The Blower Wheel is an OEM part for Whirlpool dryers. This component is crucial for the proper circulation of hot air within the dryer drum, ensuring efficient drying of clothes by directing airflow through the drum and out the exhaust.

Common causes of a bad blower wheel include accumulated lint and debris obstructing the wheel, physical damage from foreign objects, or general wear from prolonged use. A faulty blower wheel can significantly reduce drying efficiency and may cause the dryer to overheat.

Symptoms of a bad blower wheel include:

Longer drying times for clothes
Unusual noises during the drying cycle
Overheating of the dryer
Poor airflow from the dryer vent

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Will not tumble
Takes too long to dry
Noisy

Do-It-Yourself Stories from Customers like You Broken blower wheel on dryer Mark B. • Independence , WV • April 12, 2014

I FOUND the website on t internet, found my part ordered it and watched the how to video ,repaired the dryer myself. Awesome Website. Read more

$33.48

Compare At:: $39.84
You Save:: $6.36

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Inglis Catch

5.0 (35)

By: Whirlpool

Part Number: W11429587

The Dryer Door Catch is an OEM part for Whirlpool dryers. It keeps the dryer door securely closed during operation.

A bad door catch can occur due to regular use, wear and tear, or accidental damage. If you notice that the dryer door is not staying closed or is popping open during the drying cycle, it may indicate a problem with the door catch.

Symptoms of a bad door catch include:

The dryer door not staying closed
Difficulty in properly latching the door shut
Loud banging noises or vibrations

Replace your faulty dryer door catch with this genuine OEM part to restore your dryer door.

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Dryer door catch broke, unable to close the door! Stella H. • Beverly Hills , FL • April 10, 2020

I watched your video and had it fixed in less than 1 minute! Read more

$20.95

Compare At:: $25.14
You Save:: $4.19

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Inglis Lint Screen Housing Foam Seal

4.9 (107)

By: Whirlpool

Part Number: WP339956

The Lint Screen Housing Foam Seal is an OEM part for Whirlpool dryers. This seal is placed around the lint screen housing to prevent air leaks and ensure that the dryer operates efficiently by directing airflow properly through the lint screen. By maintaining a tight seal, this foam helps to optimize the dryer’s performance, reduce drying times, and prevent lint from escaping into the internal parts of the dryer, which can lead to potential maintenance issues and decreased efficiency.

Symptoms of a failing lint screen housing foam seal include:

Increased lint buildup inside the dryer beyond the lint screen
Longer drying times due to inefficient air circulation
Excessive heat and humidity within the dryer

Causes of foam seal deterioration typically involve normal wear and tear, exposure to high heat which can degrade the material, or improper maintenance that can tear or dislodge the foam.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Takes too long to dry
No heat or not enough heat

Do-It-Yourself Stories from Customers like You Gas dryer did not heat and excessive lint inside the unit James C. • New Boston , MI • July 20, 2017

$10.43

Compare At:: $12.41
You Save:: $1.98

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Inglis Parts

Inglis Washer Drive Belt

Inglis Drum Support Roller

Inglis Medium Cam Agitator Repair Kit

Inglis Dryer Drive Motor

Inglis Suspension Rods

Inglis Lid Lock Assembly

Inglis Moisture Sensor Bar

Inglis Idler Pulley

Inglis Felt Drum Seal

Inglis Lid Latch Assembly

Inglis Dryer Door Handle

Inglis Drum Felt Seal

Inglis Complete Agitator Assembly

Inglis Blower Wheel

Inglis Catch

Inglis Lint Screen Housing Foam Seal

Appliance Type

Popular Inglis Models