Parts for Echo PE-201: Intank - Pe-200, 201 Parts

The wing nut seen here is used for the air filter covers on many different types of handheld outdoor power equipment. Other names for the wing nut include wing bolt and wing stud. This nut has “wings” at the top, which allows the users to turn them by hand to tighten or loosen them. This wing nut is used to secure the air filter cover and air filter to the air cleaner case. The wing nut could need to be replaced for many reasons. It could have damaged threads, or it could have become broken or corroded. The nut could have become lost when the owner was changing out the air filter or replacing the case, as well. Owners will want to get a new wing nut if there are any issues with the one currently on their machine. Whenever working with any type of outdoor equipment and parts, it is a good idea for users to wear gloves to keep their fingers safe. The wing nut is a genuine OEM replacement part that is sold individually. It can be used for tillers, leaf blowers, pole pruners, edgers, string trimmers, and hedge trimmers. The nut is compatible with models from Echo, Shindaiwa, and Little Wonder.

The air filter cover, sometimes called an air cleaner cover, is a replacement part that works on several types of lawn and garden equipment. This part keeps larger debris, which could otherwise damage or quickly clog the filter, from contacting the air filter itself. The cover still provides the clearance needed for air to properly enter the carburetor. The air filter cover often comes into contact with large pieces of debris. In some cases, the debris could cause damage, which would require the cover to be replaced. The cover could also have problems due to normal wear and tear. The replacement of the cover is fast and easy. The authentic OEM air filter cover is sold individually. It works on tillers, string trimmers, leaf blowers, hedge trimmers, pole pruners, and edgers. Brands that are compatible with this air filter cover include Echo and Shindaiwa. Buyers should consult their owner's manual to be sure they are choosing the right cover for their make and model.

This part is the replacement air filter for the small engine that powers several outdoor tools and equipment. It comes with a black plastic rim measuring 2.5 x 2.5 inches. It prevents dirt and debris from entering the carburetor and engine where they can cause severe damage. This type of air filter has a limited life span. Once it becomes clogged or dirty, it must be replaced rather than cleaned. Cleaning is not a long-term solution and may ultimately result in damage to the engine. A dirty or clogged filter will restrict airflow and affect engine performance. If the filter is damaged, it will have to be replaced as well. In general, air filters must be changed annually for a healthy engine. This part works with different outdoor power tools like the chipper, edger, grass trimmer, hedge trimmer, leaf blower/vacuum, pole saw, pole pruner, shredder, tiller, and water pump. It is compatible with specific products from brands like Echo, Shindaiwa, and Little Wonder. It is an OEM part sourced directly from the manufacturer and is sold individually.

This is a genuine replacement bracket that is designed to fit select lawn and garden equipment engines. The bracket is responsible for helping to secure the air filter inside of the filter cover assembly. This metal bracket screws into place, and is often removed to replace the air filter as a part of routine maintenance. This screw could become damaged or worn over time with regular use, or it could even become lost during maintenance and need to be replaced. Always use a genuine OEM replacement like this bracket, which is manufactured to exact standards by Echo. This part can be used in trimmers and blowers from Echo, Shindaiwa, and Little Wonder. It does not require any tools to replace. Simply remove the cover assembly, take off the old bracket and then screw on the new bracket. Then, replace the cover and the unit will be fixed. This bracket is made of durable metal and sold as an individual unit. It does not include any additional parts or hardware. The air filter will need to be replaced as a part of routine maintenance, which is a good time to inspect the bracket and make sure that it's not showing signs of wear before it is completely broken or lost.

Inside several types of lawn equipment, there are air filters or air cleaners. The air cleaner's purpose is to filter out small contaminants and debris for both environmental reasons and to ensure optimum operation of the device. Around the air filter element, a base connects to the carburetor to hold it in place. This part is called the air cleaner case.Through regular use, age, wear and tear, or because of extensive shock or improper use, the air cleaner case may become cracked or damaged. To ensure the air filter stays protected, the case needs to be replaced. The installation is quick and easy and can often be completed in just a few minutes. A screwdriver is required to perform the replacement of a damaged air cleaner cover. Make sure to check all connections are secure.The air cleaner case is a genuine OEM supplied part. The part sells individually. It can be used in various Echo brush cutters, drills, edgers, and trimmers. The durable piece is made of high-quality plastic and is gray. There is a choke lever installed on the case. This is only the case, and if an air filter is required, it must be purchased separately.

This intake manifold gasket is a replacement part that will work with a range of types of lawn and garden equipment to prevent leaks and to stop debris from getting into the engine. Gaskets can start to wear down over time. They may become brittle or start to break apart. If the intake manifold gasket has failed, it can cause a range of problems for the engine. There could be leaks, and the engine may no longer function properly. Owners should check their gaskets if they are having trouble with their engine. If the gaskets are to blame, they need to be replaced. This genuine OEM replacement intake manifold gasket is sold individually. It can work with blowers, hedge trimmers, edgers, grass trimmers, string trimmers, and pole pruners. Compatible brands include Echo and Shindaiwa. Buyers who are looking for intake manifold gaskets need to be sure they are choosing the correct size for their make and model.

The 5x20 screw is designed for use with Echo engines. This is a standard piece of hardware that has multiple applications for securing engine components and housings depending on the exact model and type of machine. The screw can become stripped or worn over time, break off due to an incident or impact, or even get lost during other repairs. In any situation, this screw will need to be replaced as quickly as possible to prevent any further damage or issues with the operation of the equipment. This genuine OEM screw will work with select models of equipment from Echo, Shindaiwa, and Little Wonder. It can be used with over 150 trimmers, edgers, blowers, and hedge trimmers. This screw has multiple uses on various models so consult the parts diagram for exact location and replacement process. This screw requires a phillps head screwdriver for replacement. It is sold individually and includes the washer and lock washer to create a secure seal. Those who need additional screws will have to purchase multiple quantities.

The manufacturers of Echo, Shindaiwa, and Little Wonder tools use this #5 nut at various points in more than 150 gasoline powered tools. Included among them are hedge trimmers, power saws, pruners, grass trimmers, edgers, leaf blowers, and chainsaws. The #5 nut is a lock nut, one that does not need a lock washer to prevent it from coming loose when it is used to bolt one piece of metal to another. Each of these devices has an engine housing and metal superstructures that call for metal parts to be joined together, which is were the #5 nut comes into play. As it is a small piece, and because it is used in so many places and for so many reasons, #5 nuts are often lost. Occasionally they are not tightly fastened after a repair. More often, they are simply set aside and forgotten. For this reason, it is a good idea for users to purchase several of these hardware pieces at a time. Like all our other products, this #5 nut is an OEM genuine replacement part. This means the original manufacturer machined this part or that it was built according the same specifications as the original so as to be a perfect match.