Parts for Echo PE-201: Fan Case / Clutch - Pe-200, 201 Parts

This genuine Echo ignition switch can be used as a replacement part for string trimmers, hedge trimmers, leaf blowers, leaf vacuums, and edgers. The function of an ignition switch in outdoor appliances is to turn on the engine by connecting to the spark plugs and firing them up in order to power the engine.An ignition switch can be worn down over time by overuse or exposure to the elements. An ignition switch can also be damaged by a direct impact collision that can warp the component. It may also suffer from corrosion to the metal or plastic material that can prevent it from sending voltage and creating a spark to power on the engine. If this form of damage occurs, the ignition switch should be removed and replaced with this genuine OEM part. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This ignition switch is compatible with the following brands: Echo and Shindaiwa.

This is a clutch assembly specifically made for handheld Echo lawn and garden equipment. It uses centrifugal force to bring together two concentric shafts. This clutch assembly is high-quality, but performance should be monitored to determine when the part needs to be repaired or replaced. When replacing the clutch assembly, the first step is to turn off the power on the machine and place it on a flat surface. Remove the bolts that attach the head to the shaft to offer better access to the head of the trimmer or pruner. Next, take out the throttle cable and remove the screws holding the front cover to reach the clutch. A screwdriver can be wedged between the casing and fan to remove the clutch using a pair of vice grips. The new clutch can be installed using the same steps in reverse.This clutch assembly is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual item. The part can be used with Echo string trimmers, pole pruners, hedge trimmers, and pruners.

This is a genuine replacement for Echo 3 x 6 x 80 clear yellow pipe. The pipe is used on various engines and lawn and garden machines to transport fuel between the fuel tank and the carburetor. This pipe is made of durable plastic material, but it can become brittle and crack or break over time. This could lead to leaks or even a total engine failure, which is why it is important to replace pipes as soon as possible to ensure that further damage does not occur. This replacement part can repair various compatible machines that require a genuine Echo part. This clear fuel line pipe is designed to work with tillers, trimmers, blowers, and other lawn and garden equipment with small engines made by Echo. It is important to drain the fuel from the engine and the fuel tank before beginning any work on the fuel system. Allow the engine to cool completely and wear gloves whenever performing engine repairs. This pipe is sold as a single unit and does not include any hardware or additional parts.

Connected to the fuel vent tube, this fuel tank vent is necessary for proper fuel flow. Without this part, gas might leak out and cause damage. The vent allows air into the tank but will keep gas from coming out. This part enables the tank to breathe and helps relieve vacuum and pressure. It might be a challenge to identify if the fuel tank vent is damaged. Finding an air leak isn't easy, but a machine that demands more fuel may signal such a case. The installation of this part must be done in a well-ventilated area. Do not begin the repair without draining the existing fuel from the tank and disconnecting the spark plug wire. This fuel tank vent is a genuine OEM product sourced directly from the manufacturer and comes as an individual part. It can be used on many lawn maintenance items, including chainsaws, hedge trimmers, power blowers, power pruners, and edgers. It is compatible with models from Echo, Mantis, and Shindaiwa.

A fuel pipe or fuel line moves gas from the tank to the engine. It is constructed from a durable yet flexible synthetic rubber material. It measures 3 x 5 x 70 mm and is made from a sturdy rubber material. You can use this fuel line with different machines like pole pruners, leaf blowers and tillers, and hedge trimmers. Over time, a fuel line can become brittle due to exposure to heat and gas, cracking and potentially causing fuel leaks. When operating a machine with a leaking fuel line, it can lead to more fuel consumption and even possible mechanical failure. This is why a fuel line in poor condition should be immediately replaced. To install this replacement fuel line, the spark plug should be removed. Empty the fuel tank before installing to prevent accidental spills. The V471001200 Fuel Pipe OEM Replacement is a genuine fuel pipe replacement made by Echo. This OEM fuel line is sold individually. If a genuine Echo Fuel Line Grommet is needed, it will need to be purchased separately.

This fuel line is made to take fuel from the fuel filter in the fuel tank into the carburetor, where it is mixed with air before being ignited with a spark. Over time, the fuel line can become damaged or clogged and cause problems with lawn and garden equipment. Some of the symptoms of a bad fuel line include an engine that cuts out, a smoking engine, or an engine that refuses to start. If the fuel line is cracked or brittle, a replacement is needed. When replacing the fuel line, the replacement part should be pushed through the fuel line grommet before being connected to the carburetor. This results in forcing fuel into the carburetor whenever the primer is pushed. Before starting the replacement, make sure to turn off the engine, remove any spark plugs, and remove fuel from the tank for safety purposes. This fuel line is a genuine OEM component that comes straight from the manufacturer. It can be used on various Echo water pumps, trimmers, hedge trimmers, pole saws, leaf blowers, and edgers. This item is sold individually. Replacement of the part does not require any tools or additional components.

This fuel tank grommet creates a tight seal where the fuel line enters and exits the fuel tank. It is also commonly known as a fuel tank bumper, fuel line grommet, or rubber grommet. This particular grommet has three holes and is made of black rubber. The fuel line, the vent tube, and the fuel return line are inserted through the three holes. While the fuel tank grommet is made from durable rubber, it can get worn out over time and cause fuel to leak from the tank. At this point, it's time to replace the grommet, and it's advisable to change the fuel lines at the same time. It's a straightforward procedure that will take 15 to 30 minutes to complete. This part works with more than 150 tools and equipment. In particular, it works with outdoor power tools like the chipper, edger, grass trimmer, hedge trimmer, string trimmer, leaf blower, pole pruner, tiller, and water pump. It is compatible with brands like Echo, Little Wonder, Mantis, and Shindaiwa. This replacement part is sold individually and is supplied directly from the original equipment manufacturer.

This clip attaches the fuel line to the engine’s carburetor. This clip is important as it keeps your outdoor tool’s fuel line attached to the fuel filter. If this connection comes loose, fuel will not be filtered properly and might not reach the rest of the engine. Clips are prone to becoming brittle over time and can easily snap due to their small size and location against the vibrating engine. While a faulty fuel line clip might not be the most obvious of problems, it’s an easy fix that only requires a metal hook. Fish out the fuel line from the empty fuel tank and take off the filter. Remove the faulty clip and replace it with the new one. This item is a genuine OEM product shipped straight from the original manufacturer and is compatible with Echo, Mantis, and Shindaiwa appliances. It can be used with chainsaws, hedge trimmers, edgers, pole pruners, tillers, and string tillers, and even leaf blowers.

This felt fuel filter 125-527-1 is used to clean fuel before it reaches the carburetor. If clogged, this can restrict the flow of fuel to the carburetor, causing the engine not to start. Fits 3/16 inch ID fuel line and engines up to 30cc. This part is commonly used with blowers, chainsaws, edgers, shredders, and trimmers. Not compatible with greater than 10% ethanol fuel.

The 5x20 screw is designed for use with Echo engines. This is a standard piece of hardware that has multiple applications for securing engine components and housings depending on the exact model and type of machine. The screw can become stripped or worn over time, break off due to an incident or impact, or even get lost during other repairs. In any situation, this screw will need to be replaced as quickly as possible to prevent any further damage or issues with the operation of the equipment. This genuine OEM screw will work with select models of equipment from Echo, Shindaiwa, and Little Wonder. It can be used with over 150 trimmers, edgers, blowers, and hedge trimmers. This screw has multiple uses on various models so consult the parts diagram for exact location and replacement process. This screw requires a phillps head screwdriver for replacement. It is sold individually and includes the washer and lock washer to create a secure seal. Those who need additional screws will have to purchase multiple quantities.

This fuel cap assembly is for use with a range of gas-powered lawn and garden machines. The fuel cap covers the fuel tank and is designed to keep fuel in the tank and debris and air from getting inside. This cap includes a retainer that helps to keep the cap from falling and becoming lost when adding fuel to the machine. Fuel caps are a simple but important part of any gas-powered piece of equipment. The cap could suffer from damage caused by natural wear and tear or because of an accident. It may no longer tighten properly. They could also become lost if there is no retainer in place. When there is damage to the cap or it is lost, owners will want to replace it right away. This is an authentic OEM replacement part that is sold individually. The cap can be used on many models of tiller, string trimmer, leaf blower, edger, hedge trimmer, and pole pruner. Compatible brands include Echo and Little Wonder. Buyers must make sure they are choosing the correct fuel cap for their machine.

This is a genuine fuel cap gasket replacement designed for use in certain lawn and garden equipment engines. The fuel cap gasket is threaded onto the tank with the fuel cap, creating an airtight seal and ensuring that gasoline doesn't leak out while the machine is in use. This gasket can become corroded from the chemicals over time or simply become worn and ineffective at sealing as the rubber wears out. In some cases, the gasket is lost. A replacement with an OEM part like this will be required. This replacement fuel cap is manufactured to exact OEM standards by Echo and can be used for select models of hedge trimmers, blowers, edgers, and grass trimmers made by Echo, Little Wonder, and Shindaiwa. This gasket is sold as an individual unit and does not include any additional hardware or parts. This durable rubber gasket is easy to replace. Simply take off the fuel cap and remove the old gasket, if still present. Then, put the new gasket on the fuel tank or in the cap (depending on the requirement of the model being repaired) and replace the fuel cap. Be sure to allow the unit to cool and wear gloves when performing repairs.

It is very easy to set aside the cap to a fuel tank. Many do so at traditional gas stations, which is why so many manufacturers create gas cap connectors or capless systems. When it is yard and garden machines, it is necessary for the makers to create connectors that keep the cap of a fuel tank connected to the tank itself. Often, machines cannot run if the cap is cracked or missing. This replacement fuel tank cap connector will work with a long list of home and garden machines from Echo, LIttle Wonder, and Shindaiwa. It is made of plastic and designed to last. This is an OEM replacement part that requires no tools for installation. It ships individually and is a very easy repair.